Nokia 6088 Kurzanleitung

Nokia Customer Care

6088 (RM-218)

Mobile Terminal

Disassembly/Assembly

6088 (RM-218)

Disassembly/Assembly

Contents Page

Safety Information.................................................................................................... 3

ESD Protection..................................................................................................3

Assembly Instructions .............................................................................................. 4

Disassembly Instructions.......................................................................................... 4

1. Protect main display and camera lens surface with Protect Film...................4

2. Remove the Battery Cover and Battery.........................................................5

3. Remove A Cover Assembly...........................................................................6

4. Remove screw...............................................................................................7

5. Remove Engine Module and LCM Assembly ................................................7

6. Remove Side Key........................................................................................11

7. Remove Camera Module ............................................................................... 12

8. Remove SAM Module .................................................................................12

9. Remove Flash Lighter Module.....................................................................13

10 Remove DC Jack .......................................................................................14

11. Remove Vibrator........................................................................................14

12. Remove Headset Jack ..............................................................................15

13. Remove Keymate......................................................................................15

14.Camera Module Exchange Notice..............................................................16

6088 (RM-218)

NokiaCustomerCare Disassembly/Assembly

Safety Information

Adhere to the following guidelines when assembling and disassembling the

mobile terminals.

 QUALIFIED SERVICE

Only qualified personnel may install or repair mobile terminal equipment.

 ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect

incompatible products.

 CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user’s guide for detailed

safety instructions. Do not connect incompatible products

ESD Protection

Always follow ESD protection guidelines when disassembling and assembling

the mobile terminal. To avoid potential ESD damage, the recommendation is

to treat all assemblies and components as if they are sensitive to ESD.

(1) All Surface Mounted components must be handled as electrostatic

sensitive components.

(2) Prevent static discharge failures to all semiconductors and modules

containing ESD sensitive components by using appropriate ESD protective

equipment.

(3) Do not touch the component with bare hands, and always wear a

grounded wrist strap or footwear.

(4) A mobile terminal that is ready for use can be handled normally without

ESD protection. The battery can be replaced in normal conditions of use.

(5) All ESD-sensitive parts must be packed in metallized protective bags

during shipping and handling outside any ESD Protected Area (EPA).

Be especially careful to avoid contaminating the mobile terminal with any dust

during assembly.

6088 (RM-218)

Disassembly/Assembly

Assembly Instructions

To assemble the mobile terminal, follow the “Disassembly Instructions” in reverse

order.

Disassembly Instructions

Use the following steps to disassemble the mobile terminal.

1. Protect main display and camera lens surface with Protect Film

A. Turn the mobile terminal off.

B. Paste Main Display Protect Film on main display surface and right position.

C. Paste Protect Film on camera lens surface and right position.

6088 (RM-218)

NokiaCustomerCare Disassembly/Assembly

2. Remove the Battery Cover and Battery

A. Press around Battery Cover to release Battery Cover hook, then slip off the

Battery Cover.

B. Pull upward to remove Battery

6088 (RM-218)

Disassembly/Assembly

3. Remove A Cover Assembly

A. Place the SRT-6 into the gap between A-cover and D-cover, moving along with

perimeter, Lever to separate the snaps of A-cover and D-cover.

B. Pull D-cover away from hook of A-cover.

6088 (RM-218)

NokiaCustomerCare Disassembly/Assembly

4. Remove screw

Use a TORX T6 screwdriver to loosen and remove the six Torx screws

(M1.6x4.5). Use torque driver and set it to 21Ncm @ 700 rpm. The tolerance is

+/-2Ncm.

5. Remove Engine Module and LCM Assembly

A. Remove the LCM module shielding frame away.

6088 (RM-218)

Disassembly/Assembly

B. Adhere LCM Module Protection Film.

C. Use tweezers pull upward to remove MIC rubber.

6088 (RM-218)

NokiaCustomerCare Disassembly/Assembly

D. Remove the keypad board away.

E. Push upward to open the FPC connector holder.

6088 (RM-218)

Disassembly/Assembly

F. Place the SRT-6 into the gap between LCM and PCBA , lever upward to separate

the snaps of LCM and PCBA.

G. Remove the LCM Module.

Andere Handbücher für 6088

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nokia Handheld Handbücher

Beliebte Handheld Handbücher anderer Marken

Honeywell

Honeywell Dolphin 9900 Bedienungsanleitung

Honeywell

Honeywell CN75 Bedienungsanleitung

MiTAC

MiTAC Mio 168 Bedienungsanleitung

Wasp

Wasp WDT92 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

AXEM Technology

AXEM Technology MBS Bedienungsanleitung

Armstrong

Armstrong Brain Wave Montageanleitung

Unitech

Unitech TB128 Bedienungsanleitung

Symbol

Symbol MC9000-G Installations- und Betriebshandbuch

Unitech

Unitech HT1 1D Batch Bedienungsanleitung

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Symbol

Symbol c2000 Bedienungsanleitung

Symbol

Symbol MC18 Installations- und Betriebshandbuch

Acer

Acer n20 Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Docomo

Docomo F-04H Bedienungsanleitung

Toshiba

Toshiba e350 Series Bedienungsanleitung