Nokia BH-108 Bedienungsanleitung

Nokia Bluetooth Headset BH-108

9220726

Issue 1.0

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares

that this BH-108 product is in

compliance with the essential

requirements and other relevant

provisions of Directive 1999/5/EC. A

copy of the Declaration of Conformity

can be found at

http://www.nokia.com/phones/

declaration_of_conformity/.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

Introduction

With the Nokia Bluetooth Headset

BH-108, you can make and answer

calls hands-free with your

compatible mobile device.

Read this user guide carefully

before using the headset. Also,

read the user guide for the device

that you connect to the headset.

The surface of this device is

nickel-free.

Bluetooth wireless

technology

The headset is compliant with

Bluetooth Specification 2.0 + EDR

supporting the Headset Profile 1.1

and Hands-Free Profile 1.5. Check

with the manufacturers of other

devices to determine their

compatibility with this device.

Get started

The headset contains the

following parts shown on the title

page: earpiece (1), indicator light

(2), multifunction key (3), earloop

(4), charger connector (5), and

microphone (6).

Before using the headset, you

must charge the battery and pair

the headset with a compatible

device.

Compatible chargers

This device is intended for use

when supplied with power from the

following chargers: AC-3, AC-4,

AC-5, AC-8, DC-4, and DC-9. The

exact charger model number may

vary depending on the type of

plug. The plug variant is identified

by one of the following: E, EB, X,

AR, U, A, C, K, B, or UB.

Charge the battery

1. Connect the charger to a wall

outlet.

2. Connect the charger cable to

the charger connector. The red

indicator light is displayed

during charging. Charging the

battery fully may take up to

2 hours.

3. When the battery is fully

charged, the green indicator

light is displayed. Disconnect

the charger from the headset,

then from the wall outlet.

The fully charged battery has

power for up to 5 hours of talk

time or up to 120 hours of standby

time.

To check the battery charge when

the headset is not connected to a

charger, press the multifunction

key when the headset is

connected to a mobile device. If

the indicator light is green, the

charge level is sufficient. If the

light is yellow, you may need to

recharge the battery soon. If the

light is red, recharge the battery.

When the battery charge is low,

the headset beeps every 5 minutes

and the red indicator light flashes.

Switch on or off

To switch on, press and hold the

multifunction key for about 2

seconds. The headset beeps, and

the green indicator light is

displayed. The headset tries to

connect to the last used device.

When the headset is connected to a

device and is ready for use, the

green indicator light flashes slowly.

If the headset has not been paired

with a device, it automatically

enters pairing mode.

To switch off, press and hold the

multifunction key for about 5

seconds. The headset beeps, and

the red indicator light is briefly

displayed. If the headset is not

connected to a device within

about 30 minutes, it switches off

automatically.

Pair and connect the headset

Before using the headset, you

must pair and connect it to a

compatible device.

You can pair the headset with up

to eight devices, but you can

connect it to only one device at a

time.

1. Make sure your mobile device is

switched on and the headset is

off.

2. If the headset has not been

previously paired with a device,

switch on the headset. The

headset enters pairing mode,

and the green indicator light

starts to flash quickly.

If the headset has been

previously paired with a device,

make sure the headset is

switched off, and press and

hold the multifunction key for

about 5 seconds until the green

indicator light starts to flash

quickly.

3. Within about 3 minutes,

activate the Bluetooth feature

on your device, and set it to

search for Bluetooth devices.

For details, see the user guide

of your mobile device.

4. Select the headset from the list

of found devices.

5. Enter the passcode 0000 to

pair and connect the headset to

your device. In some devices,

you may need to make the

connection separately after

pairing.

When the headset is connected to

your device and is ready for use,

the green indicator light flashes

slowly.

To manually connect the headset

to the last used device, press and

hold the multifunction key for

about 2 seconds, or make the

connection in the Bluetooth menu

of your device.

You may be able to set your device

so that the headset connects to it

automatically. To activate this

feature in a Nokia device, modify

the paired device settings in the

Bluetooth menu.

Basic use

Place the headset on the ear

The headset is ready to be used on

the right ear. To use the headset on

the left ear, attach the earloop to

the headset so that it is to the left

of the Nokia logo (9).

Slide the earloop behind your ear

(7), and gently push the earpiece

against your ear. Push or pull the

earloop to set its length. Point the

headset towards your mouth (8).

Calls

To make a call, use your mobile

device in the normal way when the

headset is connected to it.

To redial the number you last

called (if your mobile device

supports this feature with the

headset), when no call is in

progress, press the multifunction

key twice.

To activate voice dialling (if your

mobile device supports this

feature with the headset), when

no call is in progress, press and

hold the multifunction key for

about 2 seconds. Proceed as

described in the user guide of the

mobile device.

To answer or end a call, press the

multifunction key. To reject a call,

press this key twice.

To adjust the volume, use the

volume controls on the connected

device.

To switch a call from the headset

to a compatible device, press and

hold the multifunction key for

about 2 seconds, or switch off the

headset. To switch the call back to

the headset, press and hold the

multifunction key for about 2

seconds, or switch on the headset.

Clear settings or reset

To clear all the settings from the

headset, switch off the headset,

and press and hold the

multifunction key for about 8

seconds. The headset beeps twice,

and the red and green indicator

lights alternate. After the settings

are cleared, the headset enters

pairing mode.

To reset the headset if it stops

functioning, even though it is

charged, connect the headset to a

charger while you press and hold

the multifunction key.

Troubleshooting

If you cannot connect the headset

to your compatible device, make

sure the headset is charged,

switched on, and paired with your

device.

Andere Handbücher für BH-108

Inhaltsverzeichnis

Andere Nokia Headset Handbücher

Nokia

Nokia BH-302 Bedienungsanleitung

Nokia

Nokia BH-804 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia WH 600 - Headset - Binaural Bedienungsanleitung

Nokia

Nokia BH-940 Bedienungsanleitung

Nokia

Nokia BH-302 Bedienungsanleitung

Nokia

Nokia BH-500 Bedienungsanleitung

Nokia

Nokia BH-902 Bedienungsanleitung

Nokia

Nokia LPS-4 Bedienungsanleitung

Nokia

Nokia BH-607 Bedienungsanleitung

Nokia

Nokia BH 104 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia Bluetooth Headset BH-701 Bedienungsanleitung

Nokia

Nokia BH 202 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia HS-16 Bedienungsanleitung

Nokia

Nokia HS 36W Bedienungsanleitung

Nokia

Nokia WH-700 Bedienungsanleitung

Nokia

Nokia BH-501 Bedienungsanleitung

Nokia

Nokia BH-900 Bedienungsanleitung

Nokia

Nokia BH-218 Bedienungsanleitung

Nokia

Nokia HS HS 4W Bedienungsanleitung

Nokia

Nokia BH 213 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia BH-121 Bedienungsanleitung

Nokia

Nokia BH 600 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia BH 301 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia HS-2R - Personal Radio Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung