Nokia BH-310 Bedienungsanleitung
Nokia Bluetooth
Mono Headset
BH-310
5555555/1
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Introduction
About your headset
With the Nokia Bluetooth Mono Headset BH–
310, you can handle calls hands-free, even
when using two phones at the same time.
The surface of this product is nickel-free.
Read this user guide carefully before using the
product. Also, read the user guide for the device
that you connect to the product.
For more info, go to www.nokia.com/
support.
About Bluetooth connectivity
You can use Bluetooth to make a wireless
connection to other compatible devices, such
as mobile phones.
Devices do not need to be in direct line-of-
sight, but they must be within 10 metres (33
feet) of each other. The connection may be
affected by obstructions such as walls or
other electronic devices.
This device is compliant with Bluetooth
Specification 3.0 + EDR supporting the following
profiles: headset profile (1.1) , handsfree profile
(1.5). Check with the manufacturers of other
devices to determine their compatibility with
this device.
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Get started
Keys and parts
1Charger connector
2Multifunction key
3NFC area
4Earloop
5Earpiece
6Carrying clip
7Microphone
8Car holder
9Charger connector
10 Indicator light
Charge the battery
Warning: Use only chargers approved by
Nokia for use with this particular model. The use
of any other types may invalidate any approval
or warranty, and may be dangerous. Use of
unapproved chargers may present a risk of fire,
explosion, or other hazard.
1. Plug the charger into a wall outlet.
2. Plug the charger to the charger connector
on the headset or on the car holder. The
red indicator light turns green when the
battery is fully charged.
3. Unplug the charger from the headset or car
holder, then from the wall outlet.
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
When you unplug a charger, hold and pull the
plug, not the cord.
The fully charged battery has power for up to
5 hours of talk time and up to 114 hours of
standby time. If you keep the headset in the
clip, the standby time is up to 90 days.
When the battery charge is low, the red
indicator light flashes, and you hear a voice
prompt every 5 minutes. If you've switched
voice prompts off, the headset beeps every 5
minutes.
Check the battery charge — When the
headset is switched on and you're not in a
call, press . A green light means there is
enough power. If the light is yellow, you may
need to recharge the battery soon. If the light
is red, recharge the battery.
Switch the headset on or off
Switch on — Remove the headset from the
clip or from the car holder. The headset
beeps, and a green indicator light flashes
once.
If you've never paired the headset with a
phone, or you've cleared the pairings, pairing
mode is switched on. Pair and connect the
headset with your phone within 3 minutes.
If you've paired the headset before, it
connects to the last phone it was used with.
If the headset can't find that phone, it tries
the next phone on its list of paired devices. If
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
not connected to a phone within 30 minutes,
the headset switches off.
Switch off — Put the headset in the clip. The
headset beeps, and a red indicator light
flashes once. All calls are ended.
Tip: Don't have the clip with you? To
switch the headset off, press and hold
for 5 seconds. To switch the
headset on, press .
Wear the headset
Slide the earloop behind your ear, then gently
push the earpiece against your ear. Point the
headset towards your mouth.
Change the earpad
1. The headset comes with different-sized
earpads. Select the earpad that fits the
best, and is the most comfortable for your
ear.
2. To change the earpad, pull the current
earpad from the earpiece, and push the
new earpad into place.
The headset is set up to be used on your right
ear.
Use the headset on your left ear — Remove
and attach the earloop so that it is to the left
of .
When you're not using your headset, keep it
in the clip, or car holder.
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Tip: Have your headset always at
hand – clip it to your pocket as you
would a pen.
Use the car holder
1. Make sure the surface of the car dashboard
is dry and clean.
2. Remove the protective film from the
bottom of the car holder.
3. Firmly press the car holder into place.
Tip: You can also charge your headset
through the car holder. Use a
compatible charger that uses the car
cigarette lighter socket, and connect
it to the holder.
Pair the device
Pair and connect the headset to your
phone
Before using the headset, you must pair and
connect it to a compatible phone.
You can pair your headset with 8 phones, but
you can only connect it to a maximum of 2
phones at the same time.
With some phones, you may need to make
the connection separately after pairing.
When the headset is connected to a phone,
the Bluetooth indicator light flashes slowly.
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Pair and connect the headset using
NFC
If the compatible phone supports NFC, switch
its NFC feature on, then switch the headset
on, and touch the NFC area of the headset
with the NFC area of your phone. The headset
connects to the phone automatically.
You can also disconnect the headset using
NFC. For details on NFC, see the user guide of
the phone.
If the phone does not support NFC, pair the
headset manually.
Pair the headset manually
1. Make sure your headset is switched off and
your compatible phone is on.
2. If you've never paired the headset with a
device, or you've cleared the pairings,
switch the headset on.
If you've previously paired your headset
with another device, press and hold for
5 seconds.
Pairing mode is switched on, and a blue
indicator light starts to flash quickly.
3. Within 3 minutes, switch Bluetooth on in
your phone, then set it to search for
Bluetooth devices. For details, see the user
guide of the phone.
4. On your phone, select the headset from the
list of found devices.
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
5. If asked, type in the passcode 0000.
In some devices, you may need to make the
connection separately after pairing.
Pair and connect the headset to two
devices
1. Make sure Bluetooth is switched on in both
phones.
2. To switch the headset off, press and hold
for 5 seconds.
3. Press and hold for 5 seconds to switch
pairing mode on, then pair the headset
with the second phone.
4. Switch the headset off and back on. The
headset connects to both phones.
Make calls
Make and receive calls
To make and receive calls using your headset,
you need to connect it to your phone.
Make a call — Make a call in the normal way.
Answer a call — Remove the headset from
the clip.
Tip: If the headset is not in the clip,
press .
End a call — Put the headset in the clip.
Tip: To end a call, you can also press
.
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Decline a call — Press twice.
Switch a call between your headset and
phone — Press and hold for 2 seconds.
When you're not in a call, you can redial the
last called number or use voice dialling, if
your phone supports these features with the
headset.
Redial the last called number — Press
twice.
Use voice dialling — Press and hold for
2 seconds, then follow the instructions in the
user guide of your phone.
Handle calls from two phones
Continue an ongoing call, and decline a
call on another phone — Press twice.
End an ongoing call, and answer a call on
another phone — Press .
Put an ongoing call on hold, and answer a
call on another phone — Press and hold
for 2 seconds.
Switch between active and held calls —
Press and hold for 2 seconds.
End an ongoing call, and go back to a held
call — Press .
If you redial or use voice dialling, the call is
made on the phone you last used for a call
with the headset.
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Andere Handbücher für BH-310
1
Inhaltsverzeichnis
Andere Nokia Headset Handbücher
Nokia
Nokia WH 600 - Headset - Binaural Bedienungsanleitung
Nokia
Nokia BH-201 Bedienungsanleitung
Nokia
Nokia BH-503 Bedienungsanleitung
Nokia
Nokia BH-222 Bedienungsanleitung
Nokia
Nokia Bluetooth Headset BH-701 Bedienungsanleitung
Nokia
Nokia Bluetooth Headset BH-701 Bedienungsanleitung
Nokia
Nokia BH 301 - Headset - Over-the-ear Bedienungsanleitung
Nokia
Nokia BH 604 - Headset - Binaural Bedienungsanleitung
Nokia
Nokia BH-500 Bedienungsanleitung
Nokia
Nokia BH-304 Bedienungsanleitung
Nokia
Nokia BH 600 - Headset - Over-the-ear Bedienungsanleitung
Nokia
Nokia BH-904 Bedienungsanleitung
Nokia
Nokia DVB-H Bedienungsanleitung
Nokia
Nokia BH-108 Bedienungsanleitung
Nokia
Nokia 9232254 Bedienungsanleitung
Nokia
Nokia Luna Bedienungsanleitung
Nokia
Nokia BH-505 Bedienungsanleitung
Nokia
Nokia BH 600 - Headset - Over-the-ear Bedienungsanleitung
Nokia
Nokia BH 202 - Headset - Over-the-ear Bedienungsanleitung
Nokia
Nokia BH-804 - Headset - Over-the-ear Bedienungsanleitung
