Nokia BH-804 - Headset - Over-the-ear Bedienungsanleitung

Nokia Bluetooth Headset BH-804

9218865

Issue 1.0

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares

that this BH-804 product is in

compliance with the essential

requirements and other relevant

provisions of Directive 1999/5/EC. A

copy of the Declaration of Conformity

can be found at http://www.nokia.com/

phones/declaration_of_conformity/.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

Introduction

With the Nokia Bluetooth Headset

BH-804, you can make and answer

calls hands-free with your

compatible mobile device.

Read this user guide carefully

before using the headset. Also,

read the user guide for the device

that you connect to the headset.

The surface of this device does not

contain nickel in the platings. The

surface of this device contains

stainless steel.

Bluetooth wireless technology

The headset is compliant with the

Bluetooth Specification 2.0 + EDR

supporting the Headset Profile 1.1

and Hands-Free Profile 1.5. Check

with the manufacturers of other

devices to determine their

compatibility with this device.

Get started

The headset contains the

following parts shown on the title

page: earpiece (1), indicator light

(2), volume keys (3), multifunction

key (4), earloop holder (5), earloop

(6), microphone (7), and charging

contacts (8).

Before using the headset, you

must charge the battery and pair

the headset with a compatible

device.

Compatible chargers

This device is intended for use

when supplied with power from the

following chargers: AC-6 and DC-6.

The exact charger model number

may vary depending on the type of

plug. The plug variant is identified

by one of the following: E, EB, X,

AR, U, A, C, or UB.

Charge the battery

1. Connect the charger to a wall

outlet.

2. To charge the headset in the

desk stand (if provided with the

headset), connect the charger

cable to the charger connector

at the side of the desk stand

(9), and place the lower end of

the headset into the slot on the

desk stand (10). The headset

switches off.

To charge the headset using the

charger adapter (if provided

with the headset), connect the

charger cable to the charger

connector on the adapter (11),

and insert the lower end of the

headset into the adapter (12).

The headset switches off. To

keep the adapter attached to

the charger cable, push the

cable into the slot on the

adapter.

The red indicator light is

displayed during charging.

Charging the battery fully may

take up to 1 hour with the AC-6

or DC-6 charger.

3. When the battery is fully

charged, the green indicator

light is displayed. Remove the

headset from the desk stand,

or remove the adapter.

4. Disconnect the charger from

the wall outlet.

The battery can also be charged

through the USB port of a

compatible computer using the

Nokia Connectivity Cable CA-101

(sold separately). Connect one end

of the cable to the desk stand or

charger adapter and the other end

to the USB port on the computer.

The fully charged battery has

power for up to 4 hours of talk

time or up to 150 hours of standby

time.

When the battery charge is low,

the headset beeps about every

minute, and the red indicator light

flashes.

Switch on or off

To switch on, press and hold the

multifunction key for about

2 seconds. The headset beeps,

and the green indicator light is

displayed. The headset first tries to

connect to the last used mobile

device and then, if the connection

fails, to one of the other paired

devices. When the headset is

connected to a device and is ready

for use, the blue indicator light

flashes slowly. If the headset has

not been paired with a device, it

automatically enters pairing

mode.

To switch off, press and hold the

multifunction key for about 4

seconds. The headset beeps, and

the red indicator light is briefly

displayed. If the headset is not

connected to a device within

about 30 minutes, it switches off

automatically.

Pair and connect the headset

Before using the headset, you

must pair and connect it to a

compatible device.

1. Ensure that your mobile device

is switched on and the headset

is off.

2. If the headset has not been

previously paired with a device,

switch on the headset. The

headset enters pairing mode,

and the blue indicator light

starts to flash quickly.

If the headset has been

previously paired with a device,

ensure that the headset is

switched off, and press and

hold the multifunction key (for

about 4 seconds) until the blue

indicator light starts to flash

quickly.

3. Activate the Bluetooth feature

on your device, and set it to

search for Bluetooth devices.

For details, see the user guide

of your mobile device.

4. Select the headset from the list

of found devices.

5. If necessary, enter the passcode

0000 to pair and connect the

headset to your device.

In some devices, you may need

to make the connection

separately after pairing.

If pairing is successful, the headset

appears in the menu of the mobile

device where you can view the

currently paired Bluetooth

devices.

When the headset is connected to

your device and is ready for use,

the blue indicator light flashes

slowly.

To disconnect the headset from

your mobile device, switch off the

headset, or disconnect it in the

Bluetooth menu of the device.

If you disconnect the headset from

your mobile device, you can

reconnect the headset to the

device without switching the

headset off and back on. Press and

hold the multifunction key for

about 2 seconds, or make the

connection in the Bluetooth menu

of your device.

You may be able to set your device

so that the headset connects to it

automatically. To activate this

feature in a Nokia device, change

the paired device settings in the

Bluetooth menu.

Basic use

Place the headset on the ear

The headset is provided with an

earloop that you can use for a

better fit on your ear.

To use the headset without the

earloop, gently push the earpiece

into your ear (13), and point the

headset toward your mouth.

To use the headset with the

earloop, insert the earloop holder

into the slot at the base of the

earpiece (14), and insert the

earloop into the opening on the

holder (15). To wear the headset

on the right ear, rotate the earloop

so that the loop is to the right of

the Nokia logo. Slide the earloop

over your ear (16), and push or pull

the earloop to set its length.

Gently push the earpiece into your

ear, and point the headset toward

your mouth (17).

To use the headset on the left ear,

rotate the earloop so that it is to

the left of the Nokia logo (18).

To detach the earloop, gently pull

it from the headset.

Carry the headset in the

strap

The headset may be provided with

a carrying strap. You can use the

strap to wear the headset around

your neck.

To attach the headset to the strap,

insert the headset into the catch

at the end of the strap (19).

To detach the headset, pull it from

the catch.

Calls

To make a call, use your mobile

device in the normal way when the

headset is connected to it.

To redial the number you last

called (if your mobile device

supports this feature with the

headset), when no call is in

progress, press the multifunction

key twice.

To activate voice dialling (if your

mobile device supports this

feature with the headset), when

no call is in progress, press and

hold the multifunction key for

about 2 seconds. Proceed as

described in the user guide of the

mobile device.

To answer or end a call, press the

multifunction key. To reject a call,

press this key twice.

To adjust the headset volume,

press either volume key.

To switch a call from the headset

to a connected device, press and

hold the multifunction key for

about 4 seconds (the headset

switches off), or use the keys of

your device. To switch the call

back to the headset, switch on

the headset, or press and hold the

multifunction key for about 2

seconds (when the headset is

switched on).

Clear settings or reset

To clear all the pairing settings

from the headset, switch off the

headset, and press and hold the

multifunction key (for over 8

seconds) until the red, green, and

blue indicator lights start to

alternate. After the settings are

cleared, the headset enters pairing

mode.

To reset the headset if it stops

functioning, even though it is

charged, connect the headset to a

charger that is plugged into a wall

outlet. The reset does not clear the

pairing settings.

Troubleshooting

If you cannot connect the headset

to your compatible device, check

that the headset is charged,

switched on, and paired with the

device.

Andere Handbücher für BH-804 - Headset - Over-the-ear

Inhaltsverzeichnis

Andere Nokia Headset Handbücher

Nokia

Nokia HS-37W Bedienungsanleitung

Nokia

Nokia BH 300 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia BH-101 Bedienungsanleitung

Nokia

Nokia BH 212 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia HS-12W Bedienungsanleitung

Nokia

Nokia HS-76W Bedienungsanleitung

Nokia

Nokia BH-208 Bedienungsanleitung

Nokia

Nokia HS-82 Bedienungsanleitung

Nokia

Nokia HS 3W Bedienungsanleitung

Nokia

Nokia HS 3W Bedienungsanleitung

Nokia

Nokia LCH-6 Bedienungsanleitung

Nokia

Nokia 02704X5 Bedienungsanleitung

Nokia

Nokia BH-501 Bedienungsanleitung

Nokia

Nokia BH-106 Black Bedienungsanleitung

Nokia

Nokia BH105 - Bluetooth Headset Ice Bedienungsanleitung

Nokia

Nokia HDW 2 Bedienungsanleitung

Nokia

Nokia BH-905 Bedienungsanleitung

Nokia

Nokia N-GAGE Bedienungsanleitung

Nokia

Nokia HS-69 - Headset - Ear-bud Kurzanleitung

Nokia

Nokia HS 11W Bedienungsanleitung

Nokia

Nokia BH-109 Bedienungsanleitung

Nokia

Nokia BH-207 Bedienungsanleitung

Nokia

Nokia hs-13w - Wireless Image Headset Bedienungsanleitung

Nokia

Nokia BH-200 Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung