Nokia BH-905 Bedienungsanleitung

Nokia Bluetooth Stereo Headset

BH-905 with active noise

cancellation

User Guide

9216273

Issue 1 EN-US

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that this BH-905 product is in

compliance with the essential requirements and other relevant provisions

of Directive 1999/5/EC.

A copy of the Declaration of Conformity can be found at

http://www.nokia.com/phones/declaration_of_conformity/.

Nokia, Nokia Connecting People and the Nokia Original Accessories logo are registered

trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation.

Other product and company names mentioned herein may be trademarks or tradenames

of their respective owners.

Reproduction, transfer, distribution, or storage of part or all of the contents in this document

in any form without the prior written permission of Nokia is prohibited.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Nokia operates under a policy of ongoing development. Nokia reserves the right to make

changes and improvements to any of the products described in this document without

prior notice.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES

SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR

INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES

HOWSOEVER CAUSED.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY

APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR

CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT

OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

The availability of particular products may vary by region. Please check with your

Nokia dealer for details.

Export controls

This device may contain commodities, technology or software subject to export laws and

regulations from the US and other countries. Diversion contrary to law is prohibited.

Issue 1 EN-US

Contents

1. Introduction ......................... 4

Bluetooth wireless technology.......... 4

About active noise cancellation........ 5

2. Get started............................ 6

Keys and parts........................................ 6

Connection method .............................. 6

Connect using Bluetooth

connectivity......................................... 6

Connect using the audio cable ...... 7

Charge the battery................................ 7

Operating time when using

Bluetooth connectivity..................... 8

Operating time when using

the audio cable................................... 8

Activate or deactivate Bluetooth

connectivity............................................. 8

Activate................................................. 9

Deactivate ............................................ 9

Pair and connect the headset

to a Bluetooth device........................... 9

Disconnect the headset.................. 10

Reconnect the headset................... 11

Troubleshooting ................................... 11

3. Basic use ............................. 12

Place the headset on the head........ 12

Active noise cancellation .................. 12

Adjust the volume............................... 12

Calls......................................................... 13

Listen to music..................................... 13

Clear settings or reset........................ 14

4. Battery and charger

information............................. 15

Care and maintenance ........... 16

FCC/Industry Canada notice .. 18

Introduction

1. Introduction

The Nokia Bluetooth Stereo Headset BH-905 with active noise

cancellation allows you to handle calls hands-free with a compatible

mobile device and listen to music from a compatible music player.

Active noise cancellation helps you to use the headset also in noisy

environments.

You can connect the headset to a compatible device using Bluetooth

wireless technology or the CA-143U audio cable.

Read this user guide carefully before using the headset. Also, read the

user guide for the device that you connect to the headset. For more

information, see www.nokia.com/support or your local Nokia website.

This product may contain small parts. Keep them out of the reach of

small children. The surface of this device does not contain nickel in

the platings. The surface of this device contains stainless steel.

■Bluetooth wireless technology

Bluetooth wireless technology

allows you to connect compatible

devices without cables. The headset

and the other device do not need to

be in line of sight, but they should be

within 10 meters (33 feet) of each

other. The closer the headset and the

other device are to each other, the

better the performance. The optimal

operating range is shown in dark

grey in the picture. The connection

is subject to interference from

distance and obstructions (shown in light grey) or other electronic

devices.

<10m

Introduction

The headset is compliant with the Bluetooth Specification 2.1 + EDR

supporting the following profiles: Headset Profile 1.1, Hands-Free

Profile (HFP) 1.5, Advanced Audio Distribution Profile (A2DP) 1.2, and

Audio Video Remote Control Profile 1.0. Check with the manufacturers

of other devices to determine their compatibility with this device.

■About active noise cancellation

Wolfson AudioPlusTM Ambient Noise Cancellation technology uses

patented signal processing technology and advanced acoustic design

expertise to deliver class-leading active noise cancellation for stereo

headsets and headphones.

This novel feed-forward technology cancels more decibels of noise

across a wider frequency range than traditional feedback technologies,

providing a peaceful and tranquil environment for users wherever they

happen to be. As Wolfson's advanced technology does not process the

playback audio stream, your music comes through in untouched hi-fi

quality stereo.

Get started

2. Get started

■Keys and parts

The headset contains the following parts:

1. Power key for active

noise cancellation

2. Indicator light for

charging and active

noise cancellation

3. Charger connector

4. Volume keys

5. Rewind key

6. Connector for Nokia CA-143U audio cable

7. Bluetooth indicator light

8. Play/Pause key

9. Forward key

10. Multifunction key

Parts of the device are magnetic. Metallic materials may be attracted to the

device. Do not place credit cards or other magnetic storage media near the

device, because information stored on them may be erased.

■Connection method

You can connect the headset to a compatible device using Bluetooth

wireless technology or the CA-143U audio cable.

Before you can connect the headset to a Bluetooth device or use active

noise cancellation, you must charge the battery. See “Charge the

battery,” p. 7.

Connect using Bluetooth connectivity

To use the headset with a compatible Bluetooth device, activate

Bluetooth connectivity (see “Activate,” p. 9) and pair and connect the

Get started

headset to the device (see “Pair and connect the headset to a Bluetooth

device,” p. 9).

If you plug the CA-143U audio cable into the headset when the headset

is connected to a Bluetooth device, the device is disconnected and

Bluetooth connectivity is deactivated.

Connect using the audio cable

The headset is supplied with the Nokia CA-143U audio cable. The

headset may also be supplied with adapters to connect the cable to

different devices. To extend the length of the audio cable, use the

CA-144U extension cable.

To connect the headset to a device that has the Nokia 3.5 mm AV

connector, plug the audio cable into the headset and the AV connector.

To connect the headset to a device that has a standard 3.5 mm audio

connector, plug the audio cable into the headset and the AD-63

adapter, and insert the adapter into the audio connector.

To connect the headset to a device that has a standard 2.5 mm audio

connector, plug the audio cable into the headset and the AD-52

adapter, and insert the adapter into the audio connector.

To connect the headset to a home stereo system that has a standard

6.3 mm headphone connector, plug the audio cable into the headset

and the AD-70 adapter, and insert the adapter into the headphone

connector.

To connect the headset to an airplane audio system that has a 3.5 mm

headphone connector, plug the audio cable into the headset and the

AD-71 adapter, and insert the adapter into the headphone connector.

■Charge the battery

Before you can connect the headset to a Bluetooth device or use active

noise cancellation, you must charge the battery.

Before charging the battery, carefully read “Battery and charger

information,” p. 15.

Get started

Warning: Use only chargers approved by Nokia for use with this

particular model. The use of any other types may invalidate any

approval or warranty, and may be dangerous.

When you disconnect the power cord of any accessory, grasp and pull the plug,

not the cord.

1. Connect the charger to a wall outlet.

2. Connect the charger cable to the charger connector. The indicator

light for charging and active noise cancellation is red during

charging.

Charging the battery fully may take up to 2 hours.

3. When the battery is fully charged, the indicator light turns green.

Disconnect the charger from the headset, then from the wall outlet.

When the battery charge is low and Bluetooth connectivity is activated,

the headset beeps every 5 minutes and the indicator light for charging

and active noise cancellation flashes red.

Operating time when using Bluetooth connectivity

When active noise cancellation is activated, the fully charged battery

has power for up to 15 hours of talk time, up to 40 hours of standby

time, or up to 16 hours of music playing time.

When active noise cancellation is deactivated, the fully charged battery

has power for up to 24 hours of talk time, up to 600 hours of standby

time, or up to 25 hours of music playing time.

Operating time when using the audio cable

The fully charged battery has power for up to 40 hours of active noise

cancellation.

■Activate or deactivate Bluetooth connectivity

When Bluetooth connectivity is activated, you can connect the headset

to one or two compatible Bluetooth devices.

Get started

Even if Bluetooth connectivity is deactivated, you can use the headset

for handling calls and listening to music through the CA-143U

audio cable.

Activate

To activate Bluetooth connectivity, press and hold the multifunction key

for about 2 seconds. The headset beeps, and the Bluetooth indicator

light briefly flashes green.

The headset tries to connect to the last used mobile device that supports

the HFP Bluetooth profile and the last used music player that supports

the A2DP profile, if the same device does not support both profiles.

When the headset is connected to the device and is ready for use,

the Bluetooth indicator light flashes blue slowly.

If the headset has not been previously paired with any device,

it automatically enters pairing mode. See also “Pair and connect the

headset to a Bluetooth device,” p. 9.

Deactivate

To deactivate Bluetooth connectivity, press and hold the multifunction

key for about 5 seconds. The headset beeps, and the Bluetooth indicator

light briefly flashes red.

If the headset is not connected to a Bluetooth device within about

30 minutes, the headset deactivates Bluetooth connectivity

automatically. Bluetooth connectivity is also deactivated if

you connect the CA-143U audio cable to the headset.

■Pair and connect the headset to a Bluetooth

device

If your mobile device supports the A2DP Bluetooth profile and has

a music player feature, you can use the device to also play music

through the headset.

If your mobile device does not support the A2DP profile, you can

separately pair the headset with the mobile device and a music player

that supports this profile. If you have paired and connected the headset

Get started

with your mobile device, disconnect the headset from it before pairing

the headset with the music player.

1. Ensure that your mobile device or music player is switched on.

2. To pair the headset if it has not been previously paired with a device,

activate Bluetooth connectivity on the headset. The headset enters

pairing mode, and the Bluetooth indicator light starts to flash

blue quickly.

To pair the headset if it has been previously paired with a device,

ensure that Bluetooth connectivity is deactivated on the headset,

and press and hold the multifunction key (for about 5 seconds)

until the blue indicator light starts to flash quickly.

3. Within about 3 minutes, activate Bluetooth connectivity on your

mobile device or music player, and set it to search for Bluetooth

devices. For instructions, see the user guide of your device .

4. Select the headset from the list of found devices on your mobile

device or music player.

5. If necessary, enter the passcode 0000 to pair and connect the

headset to your device. If your device does not have a keypad,

it may use this passcode by default.

In some devices, you may need to make the connection separately

after pairing. You only need to pair the headset with your device

once.

If pairing is successful, the headset appears in the menu of your device

where you can view the currently paired Bluetooth devices.

When the headset is connected to your device and is ready for use,

the Bluetooth indicator light flashes blue slowly.

You can pair the headset with up to eight devices but connect it to only

one device supporting the HFP Bluetooth profile and another device

supporting the A2DP Bluetooth profile at a time.

Disconnect the headset

To disconnect the headset from your Bluetooth device, deactivate

Bluetooth connectivity on the headset, or disconnect the headset in

Andere Handbücher für BH-905

Inhaltsverzeichnis

Sprachen:

Andere Nokia Headset Handbücher

Nokia

Nokia BH105 - Bluetooth Headset Ice Bedienungsanleitung

Nokia

Nokia HS-12W Bedienungsanleitung

Nokia

Nokia BH-218 Bedienungsanleitung

Nokia

Nokia Bluetooth Headset BH-701 Bedienungsanleitung

Nokia

Nokia HS-12W Bedienungsanleitung

Nokia

Nokia BH 604 - Headset - Binaural Bedienungsanleitung

Nokia

Nokia BH 300 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia BH-905 Bedienungsanleitung

Nokia

Nokia WH-800 Bedienungsanleitung

Nokia

Nokia BH-208 Bedienungsanleitung

Nokia

Nokia BH 104 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia BH 604 - Headset - Binaural Bedienungsanleitung

Nokia

Nokia BH 604 - Headset - Binaural Bedienungsanleitung

Nokia

Nokia BH-801 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia 9232254 Bedienungsanleitung

Nokia

Nokia hs-13w - Wireless Image Headset Bedienungsanleitung

Nokia

Nokia BH-200 Bedienungsanleitung

Nokia

Nokia BH-214 Service-Handbuch

Nokia

Nokia BH-806 Bedienungsanleitung

Nokia

Nokia WH-500 Bedienungsanleitung

Nokia

Nokia BH-303 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia BH-902 Bedienungsanleitung

Nokia

Nokia BH-501 Bedienungsanleitung

Nokia

Nokia BH 211 - Headset - Over-the-ear Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung