Nokia SERIES 30 Bedienungsanleitung

NOKIA 30

GSM CONNECTIVITY TERMINAL

GUIDE FOR USER CONTROL MODE

Contents

DEFINITI NS AND TERMIN L GY..................................................................................... 2

REFERENCES ......................................................................................................................3

1. D CUMENT SC PE..................................................................................................... 3

2. PR DUCT C NCEPT AND USAGE ............................................................................. 3

2.1 GENERAL ............................................................................................................... 3

2.2 USER C NTR L M DE......................................................................................... 3

3. SECURITY..................................................................................................................... 4

4. GETTING STARTED ..................................................................................................... 5

4.1 SECURITY SETTING .............................................................................................. 5

4.1.1 MESSAGE IDENTIFIER....................................................................................... 5

4.1.2 AUTH RIZATI N NUMBER................................................................................ 5

4.1.3 PASSW RD ........................................................................................................ 6

4.2 INPUT M DE AND INITIAL UTPUT STATE......................................................... 6

4.3 SMS CENTER NUMBER......................................................................................... 8

4.4 C NNECTING A DEVICE R A MACHINE ............................................................ 8

5. INPUT/ UTPUT PIN DESCRIPTI NS .......................................................................... 9

6. C MMAND SYNTAX................................................................................................... 10

7. C MMAND TEMPLATES ............................................................................................ 11

7.1 C MMAND LIST ................................................................................................... 11

7.2 DETAILED C MMAND INF RMATI N AND RESP NSES ................................ 12

7.2.1 CHANGE_PW RD ............................................................................................ 12

7.2.2 READING INPUTS............................................................................................. 13

7.2.3 SUBSCRIBING INPUT EVENTS........................................................................ 13

7.2.4 READING UTPUTS......................................................................................... 16

7.2.5 WRITING UTPUTS.......................................................................................... 16

7.2.6 C NTR LLING P WER SUPPLY T THE DEVICE ........................................ 18

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form

without the prior written permission of Nokia is prohibited.

Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. ther product

and company names mentioned herein may be trademarks or tradenames of their respective owners.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and

improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special,

incidental, consequential or indirect damages howsoever caused.

The contents of this doc ment are provided "as is". Except as req ired by applicable law, no

warranties of any kind, either express or implied, incl ding, b t not limited to, the implied

warranties of merchantability and fitness for a partic lar p rpose, are made in relation to the

acc racy, reliability or contents of this doc ment. Nokia reserves the right to revise this

doc ment or withdraw it at any time witho t prior notice

The availability of particular products may vary by region. Please check with the Nokia dealer nearest

to you.

2/18

DEFINITIONS AND TERMINOLOGY

ASCII American Standard Code for Information Interchange

AT Attention

C RBA Common bject Request Broker Architecture

CSD Circuit Switched Data

GSM Group Special Mobile, Global System for Mobile communications

GPRS General Packet Radio Service

I/ Input/output

M2M Machine-to-Machine, Man-to-Machine, Machine-to-Man

SM Short Message, text message

SMS Short Message Service

SW Software

3/18

REFERENCES

1. Nokia 30 GSM Connectivity Terminal Product Guide

2. Nokia 30 GSM Connectivity Terminal Technical Specification

3. M2M System Connector Electrical Specification for Nokia 30 GSM Connectivity

Terminal

1. DOCUMENT SCOPE

This document describes how the Nokia 30 GSM Connectivity Terminal can be used in User

control mode. The ways of controlling the terminal in this operation mode is described as well

as how this can be done in a more secure way.

For more detailed information about the Nokia 30 GSM Connectivity Terminal, other Nokia

M2M products and application development for M2M, please visit Forum Nokia and M2M

links at http://www.forum.nokia.com.

2. PRODUCT CONCEPT AND USAGE

2.1 GENERAL

Nokia 30 is a GSM Connectivity Terminal for EGSM 900/GSM 1800 networks. It includes a

GSM transceiver with built-in data capabilities, a SIM card reader, an internal antenna, an

external antenna connector, and an M2M system connector.

The Nokia 30 GSM Connectivity Terminal has three different operation modes:

§ User control mode

§ AT command mode and

§ M2M system mode

In AT command mode the Nokia 30 GSM Connectivity Terminal is used as a GSM data

modem using AT commands. In M2M system mode the Nokia 30 is used as a part of Nokia

M2M Platform using C RBA messaging.

2.2 USER CONTROL MODE

In the user control mode the Nokia 30 GSM Connectivity Terminal is controlled with e.g. a

mobile handset. Text message (short message service = SM) templates that are sent from

the mobile to the Nokia 30 instruct the terminal, which in turn controls a device or machine,

attached to it through the M2M system connector.

4/18

The Nokia 30 processes the SM and sends a response back to the command originator.

Finally, a received and recognized command will be deleted by the service. Unrecognised

commands would be stored to terminal or SIM as normal messages.

The control or monitoring is through general-purpose inputs and outputs of the M2M System

Connector. Thus, there are three general-purpose inputs and five general-purpose outputs

on the M2M system connector of the Nokia 30 GSM Connectivity Terminal. The inputs can

be used in either digital (on/off) or analog (continuous signal) mode. The outputs can be used

in digital mode only (set something on/off).

3. SECURITY

There are three levels of access control for User control mode: message identifier, password

and authorization number. A message identifier has to be used i.e. the terminal has to be

named in order to be able to use the User control mode of the Nokia 30 GSM Connectivity

Terminal. The identifier initiates every text message template aimed to control the Nokia 30

GSM Connectivity Terminal and the application attached to it.

The identifier is entered with the Nokia 30 Configurator software when the terminal is used

for the first time.

A user specified password could be used to further secure the communication between the

handset and the terminal. The password is entered whenever a text message template is

sent to the Nokia 30. The password is activated and/or changed with the Nokia 30

Configurator software or a text message (SM).

Access can be secured by specifying from which phone number the requests for control are

allowed, thus determining an authorization number. The number specification is done with

Nokia 30 Configurator software. nly one number can be specified as authorization number.

5/18

4. GETTING STARTED

4.1 SECURITY SETTING

The following settings must be made first before the User Controlled I/ service can be used.

All settings can be made with Nokia 30 Configurator software by opening menu option

Remote I/ Control -> User control mode (see Figure 1).

4.1.1 Message identifier

Message identifier is a mandatory parameter that has to be set in order to use the service. If

this parameter is not set (i.e. its empty), the service is switched off and commands cannot be

executed by the service. The parameter accepts 0-8 characters (ASCII character range

0x20-0x7E) e.g. Nokia30. A command always starts with the Identifier. Note that the Identifier

parameter is case sensitive (see Figure 1).

4.1.2 A thorization n mber

Authorized Number is an optional parameter that could be used if a user wants to secure the

system e.g. in case commands will be accepted only from one phone number. The most

secure system will be achieved if both, the Authorized Number and the Password, optional

properties are activated. The parameter accepts numbers 0-9 and ‘+’ character (ASCII range

0x30-0x39 and 0x2B) e.g. +1234567890 and the maximum length of it 32 (see Figure 1).

If Authorized Number property is activated and a terminal receives a command from some

other phone number, it will send a following indication message to the Authorized Number:

Invalid Originator:

N mber: X

Command: Y

Where X refers to an invalid command originator phone number, and Y refers to a

"command". The command may or may not be a valid command. If a command length is too

long to be shown in one message, the Y refers to a text "Too Long". In this case, the

indication message looks like this (X as described above):

Invalid Originator:

N mber: X

Command: Too Long

6/18

4.1.3 Password

Password is an optional parameter that could be used if a user wants to secure system e.g.

in case that commands will be accepted from several phone numbers. The parameter

accepts 0-8 characters (ASCII character range 0x20-0x7E) e.g. password. The password is

case sensitive (see Figure 1).

Figure 1 User Control mode dialog in the Nokia 30 Configurator.

4.2 INPUT MODE AND INITIAL OUTPUT STATE

Input modes and initial output states can be configured with the Nokia 30 Configurator by

opening menu option Remote I/ control -> General.

Each of the inputs can be configured as digital or analog depending on the nature of the

device being monitored. If the information available from the device is on-off information, the

input should be configured as digital. If in turn the information is of a continuous nature, the

input should be analog. (See Figure 4 for a view of the Nokia 30 Configurator for Input

settings).

It is possible to subscribe events as alarms to a specific phone number. In the case of digital

input an alarm can be triggered when the state of the digital input changes. In the case of

analog input low and high limits and a period for checking the input state can be set. For

more information about subscribing input events, see chapter 7.2.3.

7/18

The initial state of each output pin and thus the device being controlled can also be set using

the Nokia 30 Configurator. See Figure 2 for a view of the Nokia 30 Configurator for setting

initial output states.

Figure 2 Setting initial output values with the Nokia 30 Configurator.

8/18

4.3 SMS CENTER NUMBER

SMS Centre Number must be set. If it is not set, the service is in off mode. The SMS Centre

number can be set with the Nokia 30 Configurator software by opening menu option GSM

Settings -> Advanced -> Short messages (see Figure 3):

Figure 3 Setting SMS entre number with the Nokia 30 Configurator

Note that it is recommended that the terminal should be switched off and on every time

parameters are changed.

4.4 CONNECTING A DEVICE OR A MACHINE

A device to be controlled with the Use control mode of the Nokia 30 is connected physically

to it through the M2M System Connector. The general-purpose inputs and outputs of the

M2M System Connector described in Chapter 5 are connected to the device.

For more information about how to connect a device electrically to the Nokia 30, please see

reference 3. For information about the mechanical characteristics and recommended

connector types for the M2M System Connector, please see Reference 1.

Andere Handbücher für SERIES 30

Andere Nokia Touch-Terminal Handbücher

Nokia

Nokia G-010G-A Bedienungsanleitung

Nokia

Nokia Mobile Phone Bedienungsanleitung

Nokia

Nokia 7368 Bedienungsanleitung

Nokia

Nokia 32 Bedienungsanleitung

Nokia

Nokia ONT G-010S-A Bedienungsanleitung

Nokia

Nokia 32 Technisches Datenblatt

Nokia

Nokia 7368 Bedienungsanleitung

Nokia

Nokia 30 GSM Montageanleitung

Nokia

Nokia 22 Bedienungsanleitung

Nokia

Nokia Cardphone 2.0 Bedienungsanleitung

Nokia

Nokia 30 GSM Bedienungsanleitung

Nokia

Nokia G-0425G-A Bedienungsanleitung

Nokia

Nokia DNT2Mi sp/mp Bedienungsanleitung

Nokia

Nokia G-010G-T Bedienungsanleitung

Nokia

Nokia XS-010X-Q Bedienungsanleitung

Nokia

Nokia XS-2426G-A Bedienungsanleitung

Nokia

Nokia 7368 ISAM ONT G-240W-C Bedienungsanleitung

Nokia

Nokia DNT2Mi-fp Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung