Nomad X Bedienungsanleitung

Nomad X, XC, XE

Getting Started Guide

Welcome

This manual has supplemental information to the Nomad™

Getting Started Guide. It covers the additional wireless WAN

feature that has been added to this Nomad. This feature will allow

you to communicate from field to office, send E-mail messages,

send text messages, using a data connection from your local GSM

cellular provider.

Contents

Welcome.........................................................................................1

Setting up the phone features..........................................................3

Installing (or changing) the SIM card .....................................3

Customizing your phone .........................................................4

GPRS Connection...........................................................................6

Setting up the GPRS connection .............................................6

Starting a GPRS connection....................................................6

Using the WWAN features.............................................................7

Browsing the Internet..............................................................7

Internet Sharing.......................................................................7

SMS messages.........................................................................7

Using contacts to send a message............................................8

Sending a contact to another Windows Mobile based device..8

Sending and receiving E-mail .................................................8

Data connection status indicators............................................9

Notification LEDs.................................................................10

WLAN visibility...........................................................................10

Features not available ...................................................................10

Regulatory Information.................................................................11

Canada...................................................................................11

Declaration of Conformity............................................................12

Exposure to Radio Frequency (RF) Signals..........................13

Carrying the unit ...................................................................13

Telecommunications & Internet Association (TIA) safety

information............................................................................14

Other Nomad resources ................................................................14

CAUTION:

•DO NOT use your Nomad while driving a moving vehicle.

•When you are on a plane, in a medical facility or at a gas

station where wireless communication devices are not

allowed, go to Wireless Manager to TURN OFF all wireless

communications. Simply turning the Power key off does not

turn off these communications.

Setting up the phone features

Installing (or changing) the SIM card

1. Hold down the Power key for about 3 seconds to display the

power menu. Tap on Replace Battery/SIM to ensure that the

alarms will not wake up the Nomad.

2. Remove the hand strap.

3. Use the screwdriver on the end of your stylus or use a small

#1 Philips head screwdriver to loosen the four screws in the

battery door.

4. Remove the battery from the unit.

5. Slide the silver SIM carriage to

the unlocked position (to the right).

6. Gently open the hinged SIM

carriage door, and place the SIM

card (purchased from your

cellular service provider) into the

slot. The golden contacts should

be facing down. Also ensure that

the notched corner aligns with

the angled corner on the SIM carriage.

7. Close the SIM carriage and then slide it to the locked position

(to the left).

8. Place the battery into the unit.

9. Place the battery door over the battery, with the flat side of

the battery door at the top of the unit. Use the screwdriver end

of the stylus or screwdriver to gently tighten the four screws.

10. Replace the hand strap.

11. Turn the unit ON to resume operation.

Customizing your phone

Tap Start / Settings / Phone. The following settings are described

below.

Phone Number

The ring for text messaging notifications can

be changed. Tap Start / Settings /

Sounds & Notifications /Notifications

and select Messaging: New text

message. Choose the sound you want.

PIN Number: a PIN can be set to block

unauthorized access to your data

connection.

NOTE: This device is data-only and dialing

controls are not available.

Call Forwarding: Voice calls to the Nomad

can be forwarded to another phone.

NOTE: Carrier charges may apply for use of

this service.

Because the Nomad is a data-only device,

most of these settings do not apply.

IMEI: Unique number that identifies the

phone module that is embedded in the

Nomad.

IMSI and ICCID: Unique numbers

embedded on the SIM card.

NOTE: If you purchase a SIM card

separately, the phone service provider may

want your Nomad IMEI number. It is located

on this screen, as well as in the battery

compartment.

NOTE:

Leave settings set to

uto Band

Select unless there is a good reason to

make these adjustments manually.

GPRS Connection

Setting up the GPRS connection

1.Tap Start / Settings / Connections

tab / Connections.

2. Tap Add a new modem

connection.

3.To make connections easier in the

future, type in a new connection

name, such as the name of your

service provider. Select Cellular

Line (GPRS) and tap Next.

4.Enter the access point name if provided by your service

provider, and tap Next.

5.Enter the credentials provided by your service provider and

tap Finish. (User Name and Password may be required by

your Service Provider.)

Starting a GPRS connection

Tap on the Wireless Manager on the Today screen to turn on the

phone. The Nomad will automatically establish a GPRS

connection when needed.

If you want to start the connection manually, tap Start / Settings /

Connections tab / Connections. Tap Manage existing

connections. Tap and hold on the newly created connection name

and tap Connect.

NOTE: EDGE is a faster form of GPRS. E or G will

automatically appear in the notification bar and will on depend

upon the network capabilities in that area. Some service providers

may only provide GPRS.

Using the WWAN features

NOTE: The Wireless WAN (wide area network) features of this

Nomad are used only for data communication and do NOT have

voice capability or the ability to send MMS messages (Multimedia

Messaging Service). Voicemails left on this number can be

retrieved only by using another phone, depending upon the plan

you purchased from your service provider. It is recommended to

request the data-only plan from your service provider and have a

“voice restriction” placed on your line.

Use the Wireless Manager to turn on the phone and wait at least

30 seconds before using the phone. The Nomad may say the

phone is on, but it needs to register with your service provider

before it works properly. To save battery power, turn off the

phone feature when not in use.

Browsing the Internet

Tap Start / Internet Explorer Mobile, and enter the address

of one of your favorite websites.

Internet Sharing

The Internet service from your Nomad can be shared with a

computer. Tap Start / Programs / Internet Sharing. You can

connect either through USB or Bluetooth.

SMS messages

You can send a SMS (short message service) in exactly the same

way as a normal mobile telephone. Each SMS text message can

contain a maximum of 160 characters or less, depending on your

service provider. Tap Start / Messaging, and select text

messaging

Using contacts to send a message

To send a data message from contacts, tap Start / Contacts. Tap

and hold on the contact and tap Send Text Message. Type in the

message and tap Send.

Sending a contact to another Windows Mobile based

device

Tap Start / Contacts. Tap and hold on the contact and tap Send

Contact / Text Messages. Select the contact information you

want to send and tap Done. Enter phone number or contact that

you want to the information sent to and tap Send.

Sending and receiving E-mail

E-mail setup

Tap Start / Messaging / New E-mail Account. Follow

instructions to set up the e-mail service. You can synchronize with

a POP Mail server, or with a Microsoft Exchange server.

Sending and receiving messages

Tap Start / Messaging and select an e-mail account. Tap New to

compose a message and tap Send. Input the contact information.

Depending on your account settings, your phone will check for

new e-mail periodically. You can force a download of new

messages, by tapping Menu / Send/Receive.

Data connection status indicators

Following are some of the status indicators that you may see on

the navigation bar on the top of the screen.

Icon Description Icon Description

SIM card missing

EDGE available; there are no

data sessions active

Faulty SIM card

EDGE connected

New voice mail

GPRS available; there are no

data sessions active

Phone is turned on and

signal strength

GPRS connected

Phone is turned off. To

turn it on, tap this icon

Tap to view more

notifications

No signal

Data call is in progress

No service. Phone

connection unavailable or

network error.

New Instant message

received

Lost signal. The unit is

searching for a signal.

Roaming mode

Notification LEDs

At the top of the Nomad are two LEDs that provide status

information. The LED states are shown in the following tables.

Right LED Function

Off On battery power

Solid yellow Charging on AC

adapter

Solid green Fully charged on AC adapter

Blinking yellow Battery problem during charging (temperature

out of range, defective or missing battery)

Left LED Function

Off No notifications

& phone off

Blinking yellow Microsoft notifications

Blinking green

–

short blink

Phone on

network available

Blinking green

–

long blink

Phone on

data transfer in progress

NOTE: If the left LED is blinking, battery power is being consumed due to the cellular

modem being turned on, even when the device is suspended.

WLAN visibility

This Nomad has another new feature that limits the networks that

are visible for WLAN (wireless local area network). Tap Start /

Programs / Wireless Access. Select limit network visibility and

only the ones listed can be used and other networks will not be

visible. This feature is a convenience to keep other wireless

networks from alerting your unit. If you want to add other

wireless networks, change this setting.

Features not available

This Nomad does NOT have voice capability or the ability to send

MMS messages (Multimedia Messaging Service). Voicemails sent

to the Nomad can be retrieved only by using another phone,

depending upon the plan you purchased from your service

provider.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere nomad Handheld Handbücher

nomad

nomad 900 Series Bedienungsanleitung

Beliebte Handheld Handbücher anderer Marken

Honeywell

Honeywell Dolphin 9900 Bedienungsanleitung

Honeywell

Honeywell CN75 Bedienungsanleitung

MiTAC

MiTAC Mio 168 Bedienungsanleitung

Wasp

Wasp WDT92 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

AXEM Technology

AXEM Technology MBS Bedienungsanleitung

Armstrong

Armstrong Brain Wave Montageanleitung

Unitech

Unitech TB128 Bedienungsanleitung

Symbol

Symbol MC9000-G Installations- und Betriebshandbuch

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Symbol

Symbol c2000 Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Docomo

Docomo F-04H Bedienungsanleitung

Toshiba

Toshiba e350 Series Bedienungsanleitung

Palm

Palm Tungsten E2 Handbuch

Alien

Alien ALR-H460 Bedienungsanleitung

ViewSonic

ViewSonic Pocket PC V36 Bedienungsanleitung

nomad X Bedienungsanleitung

Beliebte Handheld Handbücher anderer Marken