Nonda ZUS Pro Edition Bedienungsanleitung

ZUS®Smart Vehicle Health Monitor

Pro Edition

User Manual

Please read this manual carefully before attempting installation and online

activation. Pictures are for indication and illustration purposes only

Table of Contents

Quick Start .................................................................................................................................................................................... 3

Introduction .................................................................................................................................................................................. 4

At a glance .................................................................................................................................................................................... 4

Getting Started............................................................................................................................................................................. 5

Step 1: Account Preparation on Website....................................................................................................................5

Step 2: APP Download ......................................................................................................................................................5

Step 3: Locating OBD-II port .......................................................................................................................................... 6

Compatibility................................................................................................................................................................................ 6

Specifications ............................................................................................................................................................................... 6

LED Status..................................................................................................................................................................................... 7

Important Safety Instructions.................................................................................................................................................. 7

Troubleshooting Procedures.................................................................................................................................................... 7

Regulatory Compliance ............................................................................................................................................................. 8

ELD Manual............................................................................................................................................................9

ELD Mandate Overview............................................................................................................................................................. 9

Setting up....................................................................................................................................................................................10

Installing the ZUS App on your Phone..................................................................................................................... 10

Scanner set up .................................................................................................................................................................. 10

Using the ELD ............................................................................................................................................................................10

Registration. Connect to Fleet .................................................................................................................................... 10

How to become an ELD driver .................................................................................................................................... 11

Connect app with scanner............................................................................................................................................ 11

ELD Menu Options........................................................................................................................................................... 12

First truck creating .......................................................................................................................................................... 12

Changing status................................................................................................................................................................ 12

Driving status .................................................................................................................................................................... 13

Edit status........................................................................................................................................................................... 13

Insert past duty status ................................................................................................................................................... 14

Create DVIR........................................................................................................................................................................ 14

Sign logs ............................................................................................................................................................................. 15

Inspection report.............................................................................................................................................................. 15

Related Functionality...............................................................................................................................................................16

To send Logbook complete the following steps:................................................................................................. 16

Send DVIR:.......................................................................................................................................................................... 16

Send documents:.............................................................................................................................................................. 16

Send inspection report: ................................................................................................................................................. 17

Unidentified Driving.................................................................................................................................................................17

Select “Unidentified Driving”....................................................................................................................................... 17

Register Malfunction................................................................................................................................................................17

Quick Start

GPS LED GSM LED OBD LED USB interface OBD connector

1. Standard OBD Connector

Connect to the 16 Pin on-board Diagnostic Link Connector (DLC).

2. Mini USB interface

Connect to PC through USB configuration cable.

3. SIM Card slot and LED indicator light

Introduction

ZUS smart vehicle health monitor network pro edition integrates GSM/GPRS module, high-

performance G-sensor & 3G module. Enhanced based on the original version, the device can

detect vehicle status and real-time driving behavior information. All the data collected will be

transmitted to the cloud data platform through the wireless communication network for

intelligent analysis and assessment. You can download the ZUS app on your smartphone, check

the status of your car anytime, analyze and improve driving behavior.

At a glance

• Extension Cable*

• User Manual

• Smart Vehicle Connector

*If the OBD port cover cannot be closed back after device plugged in, please use OBD

extension cable and mount the device in proper place.

OBD-II Port

Plug this end into your vehicle's OBD-II port. Check below on how to locate the OBD-II port.

Getting Started

Step 1: Account Preparation on Website

1. Appoint an admin account holder for your organization.

2. Create an account on the web portal, https:// zus.ai.

3. Invite sales staff to join in the online group.

Step 2: APP Download

Search “ZUS.ai” on the App Store or Google Play and download the app on your mobile phone.

Step 3: Locating OBD-II port

Refer to the diagram below to locate the OBD-II port. The most common location is left of the

steering wheel and underneath the dashboard. Note that the vehicle's OBD-II port may be

located behind a latch or contain a cover. If you can't find your OBD-II port, please search

"OBD-II port + car make & model" on the Internet.

Compatibility

Please note that your vehicle must be OBD-II compatible in order for the ZUS.ai app to work.

As a rule of thumb, petrol/gasoline vehicles built since 1996 and diesel vehicles built since

2004 are OBD-II compliant.

Specifications

Features

Specifications

Size

52.4 * 27.5 * 68.0 mm / 2.06 * 1.08 * 2.68 inch

Weight

63.5g / 2.24oz

Interface

OBD-II

Input Voltage

9 – 36 V

Input Current

0.01 – 0.2 A

Built-in Battery

3.7V/160mAH

Wireless Band

GSM/GPRS:850/900/1800/1900MHz

UMTS/HSPA:900/2100MHz

GPS Band

L1, 1575.42MHz

Operating Temperature

-20°C ~+80°C; -4°F ~ 176°F

Operating Humidity

5-95%

Extension Cable: Weight/ Length

63g/2.22oz / 60cm/23.62in

LED Status

RED - OBD Status

Indicator

Blinking — attempting to access OBD

Constant — OBD communication successful

OFF — OBD unavailable

BLUE - Network Status

Indicator

Blinking — attempting to access network

Constant — network communication successful

OFF — network service unavailable

GREEN - GPS Signal

Indicator

Blinking — searching for GPS signal

Constant — GPS positioning successful

OFF — unavailable

Important Safety Instructions

Do not submerge or expose to water for an extended time period.

Do not place near any open flame sources.

Do not disassemble.

Avoid dropping.

Troubleshooting Procedures

1. What do I do if there are no battery readings nor vehicle parking location records

showing in the app?

Please unplug and plug the device back into the OBD-II port, making sure it’s properly

powered up.

a. If the indicator LEDs are lit up or blinking, it means it’s properly powered up.

b. If no LED is lit up or blinking, please contact [email protected].

2. 2. What do I do if there are no vehicle parking location records while the battery

readings are on? Does the Green LED light up when you turn on the engine?

a. If the Green LED is lit up or blinking, please contact [email protected].

b. If the Green LED keeps flashing for more than 10 mins, please unplug the device,

wait 5 minutes, and then plug it back again and see if you are able to get a parking

location in the app. If you still are not able to do so, please contact [email protected].

Regulatory Compliance

FCC Compliance Statement FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment. This device complies with Part 15 of

the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

ELD Manual

ELD Mandate Overview

It is important to know that ELDs do not fully automate driver logs but are a tool to simplify

the process of data collection for a driver’s logs. For example, you still have to manually set

your duty statuses to “Off Duty”, “Sleeper Berth”, and so on. You also have to manually certify

your records.

The BIT ELD adapter allows your vehicle to communicate with the BIT ELD app over a wireless

connection. To support compliance with the FMCSA’s ELD mandate, it automates the collection

of the following data items:

Vehicle Identification Number (VIN)

Odometer mileage

Engine hours

Engine on/off status

Vehicle in-motion status

These are the only data items from the vehicle’s data bus that are used to support compliance

with the ELD mandate.

The VIN is used to automatically associate your records with a specific vehicle. If you move

your ELD adapter to a different vehicle, it will automatically read the new VIN and use the new

VIN in your logs. The odometer and engine hour readings are used to automatically fill in fields

in your driver logs.

The engine on/off status and vehicle in-motion status are used as triggers to automatically

record events. A record will be automatically added to the ELD’s logs when the engine is turned

on or turned off. When the vehicle’s wheel speed exceeds 5 mph, a duty status of “Driving” will

be automatically recorded. If the vehicle is no longer in motion, the ELD will automatically

record a duty status change to “On Duty Not Driving” after 6 minutes if the driver does not

manually change their duty status. When the ELD adapter detects that the vehicle is in motion,

the time must be recorded as either driving, personal use of the commercial vehicle, or a yard

move. The time when the vehicle is in motion cannot be shortened or changed to a non-moving

status such as Off Duty, Sleeper Berth, or On Duty Not Driving. This is all part of the ELD

mandate.

Your records are collected and stored in a database on your smartphone or tablet with the ZUS

app. However, the ELD adapter has internal memory to store events when not connected to the

ZUS app. These records will be associated with the “Unidentified Driver” account and will be

visible to all drivers of that vehicle on the Home screen of the ZUS app.

Setting up

Installing the ZUS App on your Phone

The ZUS OBD app is available from the Apple App Store and the Google Play Store. Using your

Apple or Android device, go the app store and search for “ZUS”.

Scanner set up

Before beginning to work with the application, make sure that the vehicle supports OBD-II-

standards.

1 Connect Bluetooth adapter to the 16-pin data link connector.

2 Make certain that lamp on the adapter goes on after connecting the parts (in case the

DLC is not in the open view, it is recommended checking the lamp with the help of a

pocket mirror or a front-facing camera of the smartphone).

3 Start the vehicle’s engine.

4 Select the Bluetooth option in the smartphone: “Settings” > “Bluetooth”. Turn on the

search for Bluetooth devices and find OBD-II adapter. It will appear in the list of the

available devices under the name 'scan tool','obdkey','plx','cbt' or something similar.

Tap on the name of the correct adapter. The smartphone will offer to connect the

devices.

5 Connect the devices. The scanner will require the secret code. As a rule, it is “1234” or

“0000”.

6 Scanner setup is complete.

Using the ELD

Registration. Connect to Fleet

Before beginning to work with the application, make sure that the vehicle supports OBD-II-

standards.

1 Open the “ZUS” app.

2 Tap on “Sign up now” button.

3 It will open the “Sign up” screen.

4 In the field “user type” select the option “driver”.

5 Fill in all given fields with correct information.

Inhaltsverzeichnis

Andere Nonda Automobilelektronik Handbücher

Nonda

Nonda ZUS Bedienungsanleitung

Nonda

Nonda ZUS Leitfaden

Beliebte Automobilelektronik Handbücher anderer Marken

GoldCruise

GoldCruise GC90Ci Bedienungsanleitung

DRG

DRG LC 120 Bedienungsanleitung

Blue Ox

Blue Ox BX8848 Bedienungsanleitung

Dometic

Dometic MAGICWATCH MWE890K Bedienungsanleitung

Perfect Power

Perfect Power SMT8-T5 Bedienungsanleitung

Honeywell

Honeywell Thor VM3A Bedienungsanleitung

Waeco

Waeco MagicWatch MWE250 Bedienungsanleitung

Rydeen

Rydeen BKM091 Bedienungsanleitung

Skoda

Skoda 5E0 054 630 Bedienungsanleitung

VDO

VDO SENDER UNIT 2159-0 Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

Audiovox

Audiovox PRO-PDA15 Bedienungsanleitung

Movon

Movon MDAS-3LFFHD Bedienungsanleitung

Pioneer

Pioneer Comfort adapter CA-D-PI.150 Bedienungsanleitung

Dietz

Dietz 1110 Bedienungsanleitung

Crux

Crux RVCFD-79 Bedienungsanleitung

iDataLink

iDataLink Maestro Bedienungsanleitung

COBHAM

COBHAM Explorer 325 Bedienungsanleitung