NORACORE EMBSX Montageanleitung

Manual Version 1.1

User’s Guide & Safety

Instructions

Please visit www.noracore.com/support for video instructions.

WARNING

Please read this manual carefully before

assembly and use. Failure to follow the

instructions in this manual could result in

personal injury and/or property damage.

Save this manual for future reference.

Actual model may vary from images shown

CONTENTS

SAFETY INFORMATION..............................................................................3

PACKAGE CONTENTS.................................................................................4

FEATURES..................................................................................................5

ITEMS REQUIRED.......................................................................................6

ASSEMBLY & SETUP...................................................................................7

PHONE HOLDER BRACKET & SIDE HANDLE...........................................7

GRINDING BIT INSTALLATION ...............................................................8

TOOLS STORAGE....................................................................................9

CHARGE CAMERA..................................................................................9

HOW TO USE...........................................................................................10

SET UP COMPRESSOR..........................................................................10

PREPARE MOWER ...............................................................................10

CHECK BLADE FACTORY ANGLE...........................................................10

UNFOLD EMBSX ..................................................................................11

SET GRINDER ANGLE...........................................................................12

ADD AIR TOOL OIL & CONNECT AIR HOSE ..........................................13

CONNECT CAMERA (OPTIONAL) .........................................................14

SHARPEN THE BLADES.........................................................................15

MAINTENANCE & STORAGE....................................................................17

TROUBLESHOOTING................................................................................18

WARRANTY & RETURNS..........................................................................19

30 DAY RETURN POLICY ......................................................................19

DAMAGE POLICY .................................................................................19

WARRANTY POLICY .............................................................................19

CONTACT INFO........................................................................................20

Actual model may vary from images shown

SAFETY INFORMATION

SAVE THESE INSTRUCTIONS

Fully assemble before operating.

Always wear ANSI Z87.1 approved safety glasses and ANSI S3.19

approved hearing protection when using this product.

Air supply pressure must not exceed 120 PSI.

Do not touch spinning bit.

Be sure to turn off mower engine before using this product.

Always disconnect air supply when finished using the product or

when servicing.

Make sure the wrenches have been removed from the grinder collet

before connecting air supply.

Maintain the tool and keep it clean.

Add 2 drops of pneumatic tool oil into the quick connect coupling

before each use.

Call Noracore Inc. if repair is needed. There are no user serviceable

parts inside the grinder. See contact info on the back of this manual.

Do not use the charger provided to charge any device other than the

built-in camera. It could result in damage to either the charger or the

device.

Avoid contact with metal chips created by the carbide bit. These

chips can be very sharp, penetrate your skin and irritate it. The use

of protective gloves is recommended.

Actual model may vary from images shown

PACKAGE CONTENTS

REMOVE ALL PARTS FROM PACKAGE AND IDENTIFY EACH ITEM

SHOWN BELOW. MAKE SURE ALL PARTS ARE LOCATED BEFORE

DISPOSING OF PACKAGING MATERIALS. IF ANYTHING IS MISSING

OR BROKEN PLEASE CONTACT US.

A. EMBSX

I. Abrasive Bit

B. Phone Holder Bracket

J. Grinder Wrench - 7/16 in.

C. Bolt - 3/8 in.

K. Grinder Wrench - 11/16 in.

D. Washer - 3/8 in.

L. Allen Key (Silver) - M4

E. Side Handle

M. Wrench Holder Thumb Screw

F. Allen Key (Black) - 7/32 in.

N. Camera Wall Charger

G. Air Tool Oil Container

O. USB cable

H. Tungsten Carbide Bit

Note:

Remove the protective plastic covering from the mirror before first use.

Actual model may vary from images shown

FEATURES

1. Quick Release Pin

9. Grinder Trigger

2. Phone Holder Bracket

10. Air Hose Inlet connector

3. Side Handle

11. Camera Controller

4. Clamping Handle

12. Grinder Angle Adjustment

Screw

5. Inspection Camera

13. Mirror

6. Mounting Pins for Wrenches

14. Grinder

7. Thumb Screw Nut

15. Blade Guiding Block

8. Mounting Hole for Allen Key.

Actual model may vary from images shown

ITEMS REQUIRED

•Compressor rated for at least 3CFM @ 120 PSI to operate EMBSX

•Air Hose with ¼” industrial female coupling

•Safety Glasses (ANSI Z87.1 approved)

•Hearing Protection (ANSI S3.19 approved)

•Protective Gloves are recommended for handling sharp blades and

grinding bits.

Actual model may vary from images shown

ASSEMBLY & SETUP

PHONE HOLDER BRACKET & SIDE HANDLE

Install the Phone Holder Bracket (B) and Side Handle (E) as shown below

using the 3/8in bolt (C) & washer (Part D). Use the provided 7/32” Allen

Key (F) to tighten the 3/8in bolt (C).

The Side Handle (E) can be mounted either on the left side (Fig.4) or right

side (Fig. 5).

Actual model may vary from images shown

ASSEMBLY & SETUP (CONT.)

GRINDING BIT INSTALLATION

Insert the desired grinding bit into the grinder

collet and tighten using the two wrenches

provided (J & K) in the direction show below.

Please make sure it’s tight as the grinding bit

may come loose from vibration during use

otherwise.

Blade Material

Use this Grinding Bit

Hardened Steel

Tungsten Carbide Bit (H)

Soft Steel

Abrasive Bit (I) or Tungsten Carbide Bit (H)

PRO TIP

Use the abrasive bit the first time you sharpen a blade. It is easier to

control as it does not grind as fast as the carbide bit. After you learn

how to handle the device you can switch to the carbide bit if

necessary.

ATTENTION

Protective gloves are

recommended when

handling the Carbide

Bit.

Actual model may vary from images shown

ASSEMBLY & SETUP

TOOLS STORAGE

The Grinder Wrenches (J & K) and the M4 Allen Key (L) can be

conveniently mounted and stored right on the device using the steps

shown in Figure 7 and secured with the Thumb Screw (M).

CHARGE CAMERA

Prior to first use charge the camera controller using the provided wall

charger (N) or the USB cable (O) and a portable battery.

Charging Time

aprox. 30 minutes

Runtime

aprox. 60 minutes.

Actual model may vary from images shown

HOW TO USE

SET UP COMPRESSOR

1. Set the air pressure from your compressor to 120 PSI. If a nozzle

attachment is available allow the air to spray out of the hose for 5 –10

seconds to remove dirt and water.

PREPARE MOWER

1. Move mower onto a smooth, level surface such as in a garage or

shop.

2. Turn off the engine, remove the keys and raise the deck to its top

position.

3. Disengage the mower blade drive and reach under the deck to turn

the blade until it’s pointing outward. Reengage the drive belt to lock

the blade in position. If the mower has an electric clutch, then attach

a C clamp to the deck next to the blade to prevent it from moving.

4. Make sure that the grinding bit is all the way in the grinder chuck and

that it’s securely held.

CHECK BLADE FACTORY ANGLE

1. Using the blade angle gauges on the end of the grinder wrenches (Fig.

9) check the ground factory angle of the mower blades as shown in

Fig 10.

Inhaltsverzeichnis

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch