Nordic RF650 Bedienungsanleitung

Nordic ID RF650 User’s Manual

Version 1.0

June 1st, 2004

Nordic ID assumes no responsibility for any errors, which may appear in this

manual. Furthermore, Nordic ID reserves the right to alter the hardware,

software, and/or specifications detailed herein at any time without notice, and do

not make any commitment to update the information contained herein.

Updates to this manual may be checked from the Nordic ID Internet pages

(http://www.nordicid.com).

Nordic ID products are not authorized for use as critical components in life

support devices or systems.

The WRAP is a registered trademark of Bluegiga Technologies.

The Bluetooth trademark is owned by the BluetoothSIG Inc., USA, and is

licensed to Nordic ID.

All other trademarks listed herein belong to their respective owners.

Table of Contents

1EC Declaration of Conformity.......................................................................................5

2General information.......................................................................................................6

2.1 The purpose of the use of the Nordic ID RF650................................................6

2.2 Copyright and Disclaimer ..................................................................................6

2.3 Version information...........................................................................................6

2.4 User safety information......................................................................................6

2.5 FCC related information....................................................................................8

2.5.1 FCC Compliance Statement............................................................................8

2.5.2 FCC Class B Part 15 and WRAP...................................................................9

2.6 IC related information........................................................................................9

2.7 Warranty.............................................................................................................9

2.8 Restrictions on use ...........................................................................................10

3About this manual........................................................................................................11

3.1 Checking for latest version of this manual ......................................................11

4Introduction..................................................................................................................12

4.1 System components.........................................................................................12

4.1.1 Versions of RF650 ........................................................................................12

4.1.2 Product identification label and serial number .............................................12

4.2 Basic system operation.....................................................................................13

4.3 General operation of the Hand Terminal.........................................................13

4.4 Communication between the WRAP and the Host Computer.........................14

4.4.1 Transaction Start...........................................................................................14

4.4.2 The WRAP receives a message from the Hand Terminal ............................14

4.4.3 The HOST application receives the frame from the WRAP.........................14

4.4.4 The HOST application handles the frame.....................................................15

4.4.5 HOST sends an answer to the Hand Terminal via WRAP ...........................15

4.4.6 The WRAP sends the frame to the Hand Terminal ......................................15

4.4.7 The Hand Terminal receives a frame from the WRAP.................................15

4.4.8 Transaction End ............................................................................................15

5Getting Started.............................................................................................................16

5.1 Unpacking the unit...........................................................................................16

5.2 Charging the batteries ......................................................................................16

5.3 Activating the Hand Terminal..........................................................................16

5.4 Resetting the Hand Terminal...........................................................................17

5.5 Symbols of the display.....................................................................................17

5.6 Sound ...............................................................................................................17

5.7 Keyboard..........................................................................................................18

5.8 F-Keys ..............................................................................................................19

5.9 Character map..................................................................................................19

5.10 Initial display....................................................................................................19

5.11 Setting the PIN-code ........................................................................................21

5.12 Searching for the Base Stations .......................................................................21

5.13 Input fields .......................................................................................................22

5.14 Locked fields....................................................................................................23

5.15 Filling fields using the laser scanner................................................................23

5.16 Writing text in a field .......................................................................................23

5.17 Writing letters ..................................................................................................23

5.18 Removing letters ..............................................................................................23

5.19 Moving between fields.....................................................................................24

5.20 Menu................................................................................................................24

5.21 Main user settings ............................................................................................24

5.22 Adjustments .....................................................................................................24

5.23 Info...................................................................................................................24

5.24 Versions of the RF650 .....................................................................................24

6Desk Top Charger ........................................................................................................26

6.1 General information.........................................................................................26

6.2 Safety information............................................................................................26

6.3 Desk Top Charger system components............................................................26

6.4 Connectors .......................................................................................................27

6.5 Charging indicator............................................................................................27

6.6 Battery types ....................................................................................................27

6.7 Charging the batteries ......................................................................................28

6.7.1 Audio signals and the Charging Indicator LED............................................29

7Installation and use.......................................................................................................30

7.1 Basic installation of the RF650 Hand Terminal ..............................................30

7.2 Installation of the WRAP.................................................................................30

8Appendix......................................................................................................................31

8.1 Technical specifications of the RF650 Hand Terminal ...................................32

8.2 Technical specifications of the Desk Top Charger..........................................33

8.3 Minimum system requirements for software installation................................34

8.4 Useful links ......................................................................................................34

8.5 Trademarks.......................................................................................................35

8.6 Programming the RF650 laser scanner module ...............................................35

8.7 Default factory settings of the Laser engine ....................................................37

8.8 Status messages of RF650 Hand Terminal......................................................39

8.9 “Out of Range!” ...............................................................................................39

8.10 “Searching” ......................................................................................................39

8.11 “Connecting…”................................................................................................39

8.12 “Connected! .....................................................................................................40

8.13 “Processing data!..............................................................................................40

8.14 “No answer from Host”....................................................................................40

8.15 “Battery low” ...................................................................................................40

8.16 Frequently asked questions ..............................................................................41

8.17 Service and Support contacts ...........................................................................41

8.18 Sending the unit to service (Service Report Form)..........................................42

8.19 Contact information.........................................................................................45

1EC Declaration of Conformity

Nordic ID hereby declares, that Nordic ID RF650

wireless data collection systems

have been tested according to the standards EN 300 328-2 and EN 301 489-17.

The equipment conforms to the essential requirements of the

Directive

1999/5/EC.

Salo 1.6.2004,

Jorma Lalla, Managing Director

Nordic ID Oy

2General information

2.1 The purpose of the use of the Nordic ID RF650

The Nordic ID RF650 Hand Terminal (RF650) and Wireless Remote Access

Platform (WRAP, Access Server) are designed to be used as a part of a

Nordic ID Wireless Data Collection and Communication System in accordance

with this User’s Manual. Any inappropriate use of the equipment for any other

purpose is strictly prohibited.

Please note that national and/or local regulations and/or laws may limit or

regulate the use of all or any part of the RF650 Hand Terminal, WRAP or the

system.

2.2 Copyright and Disclaimer

All rights to this manual are owned solely by Nordic ID Oy (referred to in this

without the written permission from Nordic ID by any means is strictly prohibited

excluding cases where the copying is related to end-customer or system

integrator use.

In order to enhance the functionality of its products, Nordic ID reserves the right

to change the technical specifications or functions of its products within the scope

of any existing applicable standards or regulations.

Nordic ID assumes no responsibility if any of its products is used in unlawful

ways.

2.3 Version information

The reader of this manual is advised to check for possible newer editions of this

User’s Manual. For more information on latest version, please visit our Internet-

pages at http://www.nordicid.com.

2.4 User safety information

Nordic ID products have not been designed, intended nor inspected to be used in

any life support related device or system related function nor as a part of any

other critical system and are granted no functional warranty if used in any of the

applications mentioned above.

Specific versions of RF650 Hand Terminal contain a Laser Scanner Module, an

RFID reader/writer or both. The laser of the Laser Scanner Module is a Class II

Laser, which are deemed safe for the use they are applied for in this product.

User’s should never look directly into the laser and must refrain from directing the

laser at the eyes of other persons or animals. It should also be noted, that some

electronic sensors may be effected by laser light. Please note that shiny surfaces

may reflect the laser beam into unexpected directions.

The RFID reader/writer used in specific versions of the RF650 emit RF-energy

and may thus cause disturbances to electronic equipment when used

inappropriately.

The radio parts of the RF650 Hand Terminal and the WRAP emit radio frequency

energy. Although the radio frequency energy levels normally emitted from these

products comply with applicable regulations, users with pacemakers are warned

of possible interference to pacemaker functions. Customers of systems using the

RF650 Hand Terminal and/or WRAP are advised to educate the end-users of

possible danger to pacemakers in order to avoid personal injury.

The RF650 Hand Terminal is supplied with a Laser light warning label located in

the back of the unit. See below.

ENGLISH SUOMI

LASER LIGHT VAARA LASERSATEILYÄ

DO NOT STARE INTO BEAM ÄLÄ TUIJOTA SÄTEESEEN

CLASS 2 LASER LUOKKA 2 LASER

DEUTCH SVENSKA

LASERSTRAHLEN VARNING LASERSTÅLNING

NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN STIRRA EJ IN I STRÅLEN

LASERPRODUKT DER KLASSE 2 KLASS 2 LASER

DANSK ITALIANO

LASERLYF LUCE LASER

SE IKKE IND I STRÅLEN NON FISSARE IL RAGGIOPRODOTTO

KLASSE 2 LASER AL LASER DI CLASSE 2

FRANÇAIS ESPAÑOL

LUMIERE LASER LUZ LASER

NE PAS REGARDER LE RAYON FIXEMENT NO MIRE FIJAMENTE EL HAZ

PRODUIT LASER DE CLASSE 2 PRODUCTO LASER DE LA CLASE 2

NEDERLANDS NORSK

LASERLICHT NIET IN STRAAL STAREN LASERLYS IKKE STIRR INN I LYSSTRÅLEN

KLASSE-2 LASER LASER, KLASSE 2

PORTUGUÊS

LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO

PRODUTO LASER DA CLASSE 2

Please check the WRAP User’s Manual for specific instructions relating to the

installation and placement of the WRAP unit.

2.5 FCC related information

The RF650 has been tested according to FCC regulations.

2.5.1 FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15of FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the

receiver in connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC NOTICE

1. Use only the power cord and connector cables supplied by Nordic ID

to connect the equipment.

2. Use only shielded cables to connect I/O devices to thisequipment.

3. Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate

the equipment.

2.5.2 FCC Class B Part 15 and WRAP

The radiated output power of the WRAP is far below the FCC radio frequency

exposure limits. Nevertheless, the WRAP should be used in such a manner that

the potential for human contact during normal operation is minimized.

2.6 IC related information

This device complies with Part 15 of the FCC Rules and with RSS-210 of

Industry Canada.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

2.7 Warranty

Nordic ID grants warranty to its products according to the Nordic ID General

Sales Conditions.

Warranty will be void, should the Nordic ID products be used in ways in

contradiction with the instructions laid out in this User’s Manual, or should the

products’ housing be opened or tampered with.

The products mentioned in this User's Manual are to be used only according to

the instructions described in this manual. Faultless and safe operation of the

products can be guaranteed only if the transport, storage, operation and handling

of the devices are appropriate. This also applies to the maintenance of the

products.

To prevent damage to products please follow normal ESD related procedures

when handling the products. Switch off power from devices (remove

rechargeable batteries from Hand Terminal or remove the Hand Terminal from

the Desk Top Charger and disconnect the power input from the WRAP) when

connecting or disconnecting serial cable connections.

2.8 Restrictions on use

Nordic ID products have been designed to operate on frequency ranges

allocated to the use in questions by local and international laws, regulations and

standards. The users of the products are responsible for taking care that all local

and international regulations regarding EMI and electrical safety are followed

regarding the installation and operation of the products by themselves and/or as

part of a system.

Any modifications to the internal parts or the antenna, hardware or software

related, other than described by the original manufacturer of the product in

question, are strictly prohibited. Nordic ID will not bear any responsibility for use

of its products, which have been tampered with.

Inhaltsverzeichnis

Andere Nordic Touch-Terminal Handbücher

Nordic

Nordic PL3000 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung

Prestel

Prestel VCS-G2PRO Bedienungsanleitung