Nordmann Engineering AT4 D SPA Display Bedienungsanleitung

INSTALLATION AND OPERATION MANUAL

Nordmann AT4 D SPA Display

2591890 EN 1711

Thank you for choosing Nordmann

Installation date (MM/DD/YYYY):

Commissioning date (MM/DD/YYYY):

Site:

Model:

Serial number:

Proprietary Notice

This document and the information disclosed herein are proprietary data of Nordmann Engineering AG. Neither

this document, nor the information contained herein shall be reproduced, used, or disclosed to others without the

written authorisation of Nordmann Engineering AG, except to the extent required for installation or maintenance

of recipient's equipment.

Liability Notice

Nordmann Engineering AG does not accept any liability due to incorrect installation or operation of the equipment

or due to the use of parts/components/equipment that are not authorised by Nordmann Engineering AG.

Technical modications reserved.

Contents

1 Introduction 4

1.1 To the very beginning 4

1.2 Notes on the installation and operation manual 4

2 For your safety 6

3 Product Overview 8

4 Installation 9

4.1 Unpacking and checking the scope of delivery 9

4.2 Storing the unit 9

4.3 Notes on positioning the Nordmann AT4 D SPA Display 10

4.4 Mounting the Nordmann AT4 D SPA Display 10

4.4.1 Flush mounting 10

4.4.2 Surface mounting 14

4.5 Connecting the SPA Display to the Nordmann AT4 D 17

4.6 ConguringtheNordmannAT4DforoperationwiththeexternalNordmannAT4DSPADisplay 18

5 Operation of the Nordmann AT4 D SPA display 20

5.1 Operating displays 20

6 Menu 21

6.1 Overviewmenunavigation 21

6.2 Steam bath settings 22

6.3 Display settings 23

7 Troubleshooting 24

7.1 Fault indications on the Nordmann AT4 D SPA Display 24

7.2 Malfunctions of the Nordmann AT4 D SPA Display 25

8 Taking out of service/Disposal 26

8.1 Takingoutofservice 26

8.2 Disposal/Recycling 26

9 Technical data 27

10 Spare parts 28

1.1 To the very beginning

We thank you for having purchased the Nordmann AT4 D SPA Display with touch-sensitive display.

The Nordmann AT4 D SPA Display incorporates the latest technical advances and meets all recognized

safety standards. Nevertheless, improper use of the Nordmann AT4 D SPA Display may result in danger

to the user or third parties and/or impairment of material assets.

To ensure a safe, proper, and economical operation of the Nordmann AT4 D SPA Display, please ob-

serve and comply with all information and safety instructions contained in the present installation and

operation manual.

If you have questions after reading this manual, please contact your Nordmann representative. They

will be glad to assist you.

1.2 Notes on the installation and operation manual

Limitation

The subject of this installation and operation manual is the external Nordmann AT4 D SPA Display.

This installation and operation manual is restricted to the installation, commissioning, operation, and

trouble shooting of the Nordmann AT4 D SPA Display and is meant for well trained personnel being

sufciently qualied for their respective work.

This installation and operation manual is supplemented by the operation manual for the steam generator

Nordmann AT4 D. Where necessary, appropriate cross-references are made to this publication in this

installation and operation manual.

Symbols used in this manual

CAUTION!

The catchword "CAUTION" designates notes in this installation and operation manual that, if neglected,

may cause damage and/or malfunction of the unit or other material assets.

WARNING!

The catchword "WARNING" used in conjunction with the general caution symbol designates safety

and danger notes in this installation and operation manual that, if neglected, may cause to injury to

persons.

DANGER!

The catchword "DANGER" used in conjunction with the general caution symbol designates safety and

danger notes in this installation and operation manual that, if neglected, may lead to severe injury

or even death of persons.

1 Introduction

Safekeeping

Please safeguard this installation and operation manual in a safe place, where it can be immediately

accessed. If the steam generator with which the Nordmann AT4 D SPA Display is used changes hands,

the documentation should be passed on to the new operator.

If the documentation gets mislaid, please contact your Nordmann representative.

Language versions

This installation and operation manual is available in various languages. Please contact your Nordmann

representative for information.

General

Every person working with the Nordmann AT4 D SPA Display must have read and understood the present

installation and operation manual before carrying out any work.

Knowing and understanding the contents of the Installation and operation manual is a basic requirement

for protecting the personnel against any kind of danger, to prevent faulty operation, and to operate the

unit safely and correctly.

All ideograms, signs and markings applied to the Nordmann AT4 D SPA Display must be observed and

kept in readable state.

Qualication of personnel

All actions described in the present Installation and operation manual (installation, operation, etc.) must

be carried out only by well trained and sufciently qualied personnel authorised by the owner.

For safety and warranty reasons any action beyond the scope of this manuals must be carried out only

by qualied technical personnel authorised by your Nordmann representative.

It is assumed that all persons working with the Nordmann AT4 D SPA Display are familiar and comply

with the appropriate regulations on work safety and the prevention of accidents.

This unit may not be used by persons (including children) with reduced physical, sensory or mental

abilities or persons with lacking experience and/or knowledge, unless they are supervised by a person

responsible for their safety or they received instructions on how to operate the unit.

Children must be supervised to make sure that they do not play with unit.

Intended use

The Nordmann AT4 D SPA Display is intended exclusively for the control of the steam generator

Nordmann AT4 D within the specied operating conditions (see chapter 9). Any other type of ap-

plication without the express written consent of the manufacturer is considered as not conforming with

the intended purpose and may lead to the system becoming dangerous.

Operation of the equipment in the intended manner requires that all the information in these instruc-

tions are observed (in particular the safety instructions).

2 For your safety

Behaviour in case of danger

If it is suspected that safe operation is no longer possible, then the NordmannAT4 D should immediately

be set out of operation, disconnected from the mains and secured against accidental power-up

(see Nordmann AT4 D operation manual). This can be the case under the following circumstances:

– if the Nordmann AT4 D SPA Display is damaged

– if the Nordmann AT4 D SPA Display is no longer operating correctly

– if the connecting cable is damaged

All persons working with the Nordmann AT4 D SPA Display must report any alterations to the unit that

may affect safety to the owner without delay.

Prohibited modications to the unit

No modications must be undertaken on the Nordmann AT4 D SPA Display without the express

written consent of the manufacturer.

For the replacement of defective components use exclusively original accessories and spare parts

available from your Nordmann representative.

Nordmann AT4 D SPA Display

ush-mounted

Nordmann AT4 D SPA Display

surface-mounted

Fig. 1: Frontview Fig. 2: Frontview

Fig. 3: Backview Fig. 4: Backview

3 Product Overview

1 Touch-sensitive display

2a Flush-mounted housing

2b Surface-mounted housing

3 Connecting terminal

4 Decorative cover

5Magnets for the attachment of the decorative

cover

6 Magnetic centring frame with sealing

7 Cable entries

4 Installation

4.1 Unpacking and checking the scope of delivery

Unpacking the unit

Open the packing and check the delivery for completeness. Please contact your Nordmann represent-

ative in case something is lacking, they will be glad to send you the missing part without delay. The

standard delivery includes:

– Nordmann AT4 D SPA Display ush-mounted

– Nordmann AT4 D SPA Display control PCB

– Flush-mounted housing with pre-mounted display mounting supports, fastening claws and

3 magnets

– Plastic bag containing mounting material

– Nordmann AT4 D SPA Display surface-mounted

– Nordmann AT4 D SPA Display control PCB

– Surface-mounted housing

– Plastic bag containing mounting material

– Decoration cover with pre-mounted centring frame and sealing (if ordered)

Please check the equipment for damage. Please report any damage to your Nordmann representative

and to the carriers, as required.

Packaging

The original packaging of the Nordmann AT4 D SPA Display was designed for optimum safety during

transportation. Please preserve the original packing material in case you once have to return the unit

for some reason.

In case you wish to dispose of the packaging, observe the local regulations on waste disposal. Never

dispose of the packaging to the environment.

4.2 Storing the unit

If the external steam bath control must be stored, store it in a protected area (best in the original pack-

aging) meeting the following requirements:

– room temperature: 1 ... 40 °C

– room humidity: 10 ... 80 %rh (non condensing)

4.3 Notes on positioning the Nordmann AT4 D SPA Display

Please observe the following notes for the correct positioning of the Nordmann AT4 D SPA Display:

– The Nordmann AT4 D SPA Display must not be installed in hazardous locations and in rooms where

water splashes may occur.

– Do not mount the Nordmann AT4 D SPA Display inside the steam bath cabin, sauna, bio sauna, etc.

– If possible mount the Nordmann AT4 D SPA Display at eye level.

– Do not mount the Nordmann AT4 D SPA Display in exposed places.

– Do not mount the Nordmann AT4 D SPA Display on vibrating components.

4.4 Mounting the Nordmann AT4 D SPA Display

CAUTION!

The electronic components of the Nordmann AT4 D SPA Display are very sensitive to electrostatic

discharge. For all installation work on equipment appropriate measures must be taken to protect these

components against damage caused by electrostatic discharge (ESD protection).

4.4.1 Flush mounting

1. At the desired location, mark mounting opening according to the size of the ush-mounted housing

with the help of a spirit level, then ream out the mounting opening.

Important: the mounting opening must be reamed out exactly since the decoration cover (broken

line in Fig. 5) overlaps the mounting opening on the right side only 4 mm, on the left side only 9 mm

and on the top and bottom side only 8.5 mm.

8.5 mm

141 mm

124 mm

87 mm

9 mm 4 mm

100 mm

8.5 mm

141 mm

124 mm

87 mm

9 mm 4 mm

100 mm

Cavity wall

Tmin: 15 mm

Massive wall

Tmin: 35 mm

Fig. 5: Making the mounting opening for the ush-mountedhousing

Andere Handbücher für AT4 D SPA Display

Inhaltsverzeichnis

Andere Nordmann Engineering Monitor Handbücher

Nordmann Engineering

Nordmann Engineering 2600624 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung