Nordmende HCT62FL Bedienungsanleitung
OPERATING AND INSTALLATION INSTRUCTIONS
BUILT-IN VITROCERAMIC HOB
HCT62FL
TM
DESCRIPTION OF THE HOB 3
SAFETY INSTRUCTIONS 4
INSTALLATON 6
Locati g Your Built-i Hob 6
Electrical Co ectio of Your Hob 8
USAGE 10
Tur O a d Tur Off The Co trol 11
Select Heater 11
Tur o dual- a d triple zo es 12
Set Cooki g Level With a d Without Heat Boost 12
Tur Off I dividual Heaters 13
Timer Fu ctio 14
Key Lock 16
Child Lock 17
Stop & Go Fu ctio 18
TOUCH CONTROL SAFETY FUNCTIONS 20
Se sor Safety Cut Off 20
Over Temperature Switch Off 21
Operati g Time Limitatio s 21
Residual Heat Fu ctio s 22
CLEANING AND CARE 23
CONTENTS:
........................................................
..............................................................
...............................................................................
...........................................................
...............................................
...........................................................................................
...............................................
.................................................................................
.....................................................
......................
..........................................................
..............................................................................
........................................................................................
......................................................................................
.......................................................................
....................................
...................................................................
.......................................................
..........................................................
...............................................................
..................................................................
2
3
DESCRIPTION OF THE HOB
Dear Customer,
It is important that you should read this manual for best performance and
to extend the life of your appliance. We recommend you to keep this manual
for future reference.
Your ne hob is guaranteed and ill give lasting service. This guarantee
is only applicable if the appliance has been installed and operated in
accordance ith the operating and installation instructions detailed in this
manual.
Note: Appearance of your hob maybe different than the model sho n above
due to its configuration.
SINGLE ZONE
HEATER
OVAL ZONE
HEATER
HOB
FRAME
VITROCERAMIC
SURFACE
TOUCH CONTROL
PANEL
4
SAFETY INSTRUCTIONS
Please comply with these i structio s. If you do ot, a y damage
resulti g from improper, i correct or eglige t use or improper
co ectio or i stallatio is ot covered by the warra ty.
· This appliance should be used only for normal domestic use.
· This appliance must only be used for the purpose of heating or cooking
food, any other use, for example heating rooms, orking surface or storage
surface, is dangerous.
· Additions or modifications to the appliance are not permitted.
· Do not place or store flammable liquids, highly inflammable materials or
fusible objects on or near the appliance.
· Small children must be kept a ay from the appliance.
· The appliance may only be installed and connected by an authorised
service personal.
· The electrical safety of this hob is guaranteed only if it is connected to
a properly earthed system, hich complies ith the electrical safety standards.
· Built-in appliances may only be used after they have been built in to
suitable built-in units and ork surfaces that meet the standards.
· Do not put pressure on the po er supply cable hile fitting the hob.
· Po er supply cable length should not exceed 2m for isolation safety.
· In the event of faults ith the appliance or damage to the glass ceramic
(cracks, scratches or splits), the appliance must be s itched off and
disconnected from the electrical supply to prevent the possibility of an
electric shock.
· Repairs to the appliance must only be carried out by authorised service
personal.
· Make sure all the packaging has been removed before you use the
appliance.
· Cables from electrical appliances must not touch the hot surface of the
appliance or hot cook are.
5
· Never leave the the appliance hob unattended hen cooking ith fat or
oil
. They can rapidly catch fire if overheated.
· Do not cut any food on the glass of the vitroceramic hob. Glass panels
should not be used as orking surfaces.
· Be careful hen using small household appliances, such as irons, near
the elements.
· Do not use the cooking zones ith empty cook are or ithout cook are.
· Make sure all the controls are in the off position hen not in use.
· For cleaning, the appliance must be s itched off and cooled do n.
· For safety reasons, the cleaning of the appliance ith steam jet or high-
pressure cleaning equipment is not permitted.
. Use only stable flat-based pans.
6
The electrical co ectio of this hob should be carried out by a
authorised service perso al or a qualified electricia , accordi g to the
i structio s i this guide a d i complia ce with the curre t regulatio s.
· Prior to installation, ensure that the local distribution conditions and the
adjustment of the appliance are compatible.
· The la s, ordinances, directives and standards in force in the country of
use are to be follo ed (safety regulations, proper recycling in accordance
ith the regulations, etc.)
Locati g your built-i hob
After removing the packaging material from the appliance and its accessories,
ensure that the hob is not damaged. If you suspect any damage, do not use
the appliance and contact an authorised service personal or a qualified
electrician immediately.
· This built-in hob is to be inserted into a cut out of a orktop. It ill be
electrically connected ith the s itch box belo , especially provided for this
purpose.
INSTALLATION
7
520mm
590mm
41mm
560mm
490mm
Min.
A
Min.
B
Min.
130mm
Min.
25mm
· Create an opening ith the dimensions sho n in the picture belo .The
distance bet een the rear edge of the hob and any adjacent all is depend on all
surface. Please dont use easily combustible material like curtain, paper at nearby
hob.
· Scre the 4 orktop mounting brackets on the side alls of product.
· Apply the one-sided self-adhesive sealing tape supplied all the ay round
the lo er edge of the cooking surface along the outer edge of the glass
ceramic panel. Do not stretch it.
orktop mounting bracket
Neighboorhood alls A [mm] B [mm]
Combustible 60 150
Non-combustible 25 40
8
Electrical co ectio of your hob
. Before proceeding ith the electrical connection, verify that the current
carrying capacity of the system and the socket is adequate for the maximum
po er rating of the hob.
· Electrical installation of the residence and the electrical current plug in
use must be earthed and conform ith safety regulations.
· If there is no dedicated hob circuit and fused s itch, they must be installed
by a qualified electrician before the hob is connected.
· Fused s itch must be easily accessible once the hob has been installed.
· Do not use adaptors, multiple sockets and/or extension leads.
· This appliance conforms ith the requirements ofthe follo ing EEC
Directives:
1. Vitroceramic hob EEC/73/23 and 93/68, EEC/89/336 relating to
radio interference,
2. EEC/89/109 relating to contact ith foods.
· A circuit breaker ith a contact opening of at least 3 mm, rated 20 A and
delayed functioning type must be installed inside the supply circuit.
IMPORTANT : The following diameters of supply cable must be used at least in case
of 1 phase connection :
Rated power on
nameplate:
5000W - 8700W
at 220V:
> 8700W at 220V:
> 9100W at 230V:
> 9500W at 240V:
3 x 2.5 mm 3 x 4.0 mm
3 x 4.0 mm
2
22
2
2
2
3 x 4.0 mm
3 x 2.5 mm
3 x 2.5 mm
5000W - 9100W
at 230V:
5000W - 9500W
at 240V:
Rated power on
nameplate:
Diameter of supply
cable:
Diameter of supply
cable:
Cooking hobs not provided with supply cord.
9
. For the touch controlled vitroceramic hob, the cable must be H05VV-F
3X2,5 mm² / 60227 IEC 53. You ill find the connection diagram sho n
on the back of your appliance.
· During installation, please insure that isolated cables are used. An incorrect
connection might damage your appliance. The guarantee ill not cover
such damages.
· All repairs must be carried out by an authorised service personnel or a
qualified electrician.
· Unplug your appliance before each maintenance. For reconnection, follo
the connection diagrams strictly.
* This appliance must be earthed.
* For this connection a power lead of wire type
H05V V -F should be used.
3x2,5 mm
3x2,5 mm
3x2,5 mm
² 220V~
² 230V~
² 240V~
5x1.5 mm
5x1.5 mm
5x1.5 mm
² 380V 3N
² 400V 3N~
² 415V 3N~
~
Mode Descriptions
USAGE
The appliance is operated by touching buttons and the functions are
confirmed by displays and acoustic signals.
10
Stand-By-Mode S-Mode The mains are applied to the hob control
and all heater displays are off or a residual
heat display is active.
Operating-Mode B-Mode At least one heater display sho s a heat
setting bet een ´0` and ´9`
Lock Mode VR-Mode The hob control is locked.
Inhaltsverzeichnis
Sprachen:
Andere Nordmende Kochfeld Handbücher
Nordmende
Nordmende HCI79FL Bedienungsanleitung
Nordmende
Nordmende HCT61FL Bedienungsanleitung
Nordmende
Nordmende HGE603IX Bedienungsanleitung
Nordmende
Nordmende HGX903BGL Bedienungsanleitung
Nordmende
Nordmende HCI90FL Bedienungsanleitung
Nordmende
Nordmende HTC30 Bedienungsanleitung
Nordmende
Nordmende HCI901FL Bedienungsanleitung
Nordmende
Nordmende HCT781FL Bedienungsanleitung
Nordmende
Nordmende HCP604FL Bedienungsanleitung
Nordmende
Nordmende HCI61FL Bedienungsanleitung
Nordmende
Nordmende HCI781FL Bedienungsanleitung
Nordmende
Nordmende HGX703IX Bedienungsanleitung
Nordmende
Nordmende HCT61FL Bedienungsanleitung
Nordmende
Nordmende HC62FL Bedienungsanleitung
Nordmende
Nordmende HCT78FL Bedienungsanleitung
Nordmende
Nordmende HE62BL Bedienungsanleitung
Nordmende
Nordmende HG62IX Bedienungsanleitung
Nordmende
Nordmende HCT78FL Bedienungsanleitung
