Nordson 2302 Bedienungsanleitung

Series 2300 Applicator

with SP Pump

Part 106 701 D

NORDSON CORPORATION. AMHERST, OHIO. USA

SERVICES PROVIDED TO NORDSON CUSTOMERS

Customer Support Before And After The Sale

For more than 35 years Nordson has offered unparalleled service to its customers before, during

and after the sale. Nordson representatives will work with you to choose the best system for your

application. We’ll assist you during start-up and help train your employees to maintain and

operate the equipment. Plus, parts and service are only a phone call away from one of our

strategically located sales and service centers.

System Engineering

Custom designs and modification of standard equipment are available to meet your particular

needs. From a complete new system for automotive assembly to a special nozzle used in the

production of diapers, Nordson has the expertise to integrate adhesive and sealant equipment with

your manufacturing operation.

Parts And Accessories

In addition to standard replacement parts, many accessories are available to help improve

productivity and reduce downtime. For example, heated and non-heated in-line filters reduce

stoppages from clogged nozzles, and nozzles in multi-orifice, offset, right-angle and other designs

are available for special needs. Also, gloves, solvent, spare parts kits and other components are in

stock for immediate delivery. Conversion kits for tapers, labelers and box-forming equipment are

also available.

To help you eliminate downtime and costly inplant repairs, Nordson has developed a Rebuilt

Exchange (RBXSM)Program* which can save you up to 50 percent of the cost of new equipment.

You may trade in your old worn units, hoses and guns for rebuilt Nordson equipment which has

the same warranty as new equipment.

The Nordson Package of ValuesfM

From specifications assistance to post-installation troubleshooting, the Nordson Package of Values

is designed to keep our customers productive and profitable by providing:

0 Carefully engineered, durable products *

0 Strong service support

l The back-up of a well-established international company with financial and technical strength

0 A corporate commitment to deliver what was specified

*This service not available in all countries.

306-l 8-662 ONORDSON CORPORATION 1993

770−497−3400 770−497−3500

3/05

US contact numbers updated 3/05

General Information . -03.

HOW TO USE THIS MANUAL

The Page Numbering System The page number is composed of two parts: the section number

followed by the section page. Page 5-3, for example, is the third page

in Section 5.

Finding Information Quickly Before trying to find information in this manual, become familiar with its

organization and contents.

Afterwards:

1. Use the Brief Summary of Manual Contents (below) to determine

which section contains the information you are seeking.

2. Use the tabs to find the section that contains the desired information.

On the first page of each section is a Table of Contents for that

section. It gives the starting page number of all the material in the

section.

Brief Summary of Manual

Contents The following summary lists the most important information in each

section and provides a general idea of where to look for material not

included in the summary.

Section I: Safety Summary

Section2: Equipment

Familiarization

Secfion 3: lnsfallafion

l General description

Explanation of safety symbols

Safety during installation, operation and servicing

Safety in handling solvents1

Description of equipment and features

Operation

Glossary of terms

Unpacking and inspection

Installing the unit, hoses and guns

Electrical installation

Q Nor&on Corporation 1994

AU Rights Reserved PIN 106 701A

41-2300%’ - tssued 1194

o-4 General lnformation

Brief Summary of Manual

Contents

(continued)

Section4: OperatingInstructions

Section5: Preventive Maintenance

Section 6: Troubleshooting

Section 7: Disassembly and Repair

Section 8: Illustrated Parts Lists

Section 9: TechnicalData

Section 10:OptionalParts and

Equuipment

l Loading adhesive, including flushing the system

l Daily operating procedures

l General maintenance and filter flushing procedures

Troubleshooting functional problems

Troubleshooting adhesive and adhesive-application problems

Wiring diagrams and schematics

Mechanical repairs

Electrical repairs

Gun heater and RTD replacement

Illustrations of the unit and its subassemblies

Matching parts lists

Listings of recommended spare parts and service items/kits

Mechanical specifications

Electrical specifications

Material safety data information about Nordson Type R solvent

l Listings of various field-installed options, guns, hoses, filters etc.

NOTE: If at any time you are unable to find needed information in this

manual, contact your local Nordson representative or your regional

sales office.

PIN 106 701A

41-23OOSP - tssued llg4 Q Nordson Corporation 1994

SECTION I

Safety Instructions

1. Operate safely! ........................................ l-l

2. Safety symbols ...................... ..c ............... 1-l

3. Intended use ......................................... l-2

4. Installation and electrical connections ..................... .l -2

5. Operation ............................................ l-3

Action in the event of unit malfunction .................... .l-3

Danger of burns .................................... .l-3

6. Maintenance/Repair .................................. .l-4

7. Cleaning ............................................ l-4

8. Thermoplastic hot melt material ......................... .l-5

0 Nordson Corporation 1994 P/N 106 701A

AU Rights Resewed 41-2300SP - Issued 1194

This Page Intentionally

Left Blank

PM 106 701A 0 Nordson Corporation 1994

Safety Instrirctions l-l

Section 1

Safety Instructions

1.Operatesafely! Safety recommendations contained in this section and throughout the

manual apply to tasks that may be performed on or with the unit or with

materials used with the unit. IT IS VERY IMPORTANT THAT THESE

SAFETY RECOMMENDATIONS ARE ALWAYS FOLLOWED.

FAILURE TO DO SO COULD RESULT IN PERSONAL INJURY.

AND/OR DAMAGE TO THE UNIT OR OTHER EQUIPMENT.

With this in mind, here are some basic safety recommendations:

l Read and become familiar with this Safety Instructions Section prior

to installing, operating, maintaining or repairing the unit.

l Store this manual within easy reach of personnel operating or

maintaining the unit.

l Be familiar with and always observe safety symbols.

l Wear adequate personal protective equipment and clothing such as

safety goggles and gloves.

l Familiarize yourself with and follow all safety instructions prescribed

by your company, general accident prevention regulations and

government safety regulations.

2. Safety symbols The following symbols are used throughout the manual to warn against

dangers or possible sources of danger. Become familiar with them!

Failure to heed a warning symbol could lead to personal injury and/or

damage to the unit or other equipment.

WARNING: Failure to observe may result in personal injury,

death or equipment damage.

WARNING: Risk of electrical shock. Failure to observe may

result in personal injury or death.

WARNING: Disconnect equipment from line voltage. Failure

to observe may result in equipment damage, personal injury

or death.

WARNING: Hot. Risk of burns. Wear protective

clothing/safety goggles (ANSI 287.1-l 989 or

equal)/protective gloves (P/N 902 514) depending on the

symbol shown.

0 Nordson Corporation 1994

AU Rights Reserved P/N 106 701A

41.2300SP - Issued 11’94

I-2 Safety Instructions

2. Safetysymbols

(continueoy WARNING: Risk of explosion or fire. Fire, open lights and

smoking prohibited. Failure to observe may result in

personal injury or death.

0WARNING: System or material pressurized. Release

pressure. Interrupt compressed air, set motor switch to “0”

and release hot melt material pressure by actuating the

extrusion guns. Failure to observe may result in serious

burns.

3. Intended use The unit is designed and intended to be used only for the purpose

described in Section 2 “Equipment Familiarization”. Uses not in

accordance with the Section are considered unintended uses and not in

accordance with governing regulations.

The following actions of the owner or operator of the unit are some but

not all examples of unintended use which would permit Nordson to

claim it is not responsible for personal injury or property damage arising

from such unintended use:

l unapproved modifications or changes to the unit

l failure to comply with the Safety Instructions

l failure to comply with instructions concerning installation, use,

operation, maintenance, or repair, or when these tasks are carried

out by unqualified personnel

l use of inappropriate or incompatible foreign materials or auxiliary

equipment

l failure to observe workplace safety rules or regulations issued by

government authorities or safety councils

NOTE: Operators or maintenance workers are regarded as being

“qualified personnel” when they have gained, through training and

experience, an understanding of the manner in which the unit is to be

operated, serviced and repaired, and based on safe workplace

practices are familiar with relevant regulations.

4. Installationand electrical

connections ” l All electrical, pneumatic, gas, and hydraulic connections and

installations of heated hoses and hot melt applicators may only be

carried out by qualified personnel. Be sure to observe installation

instructions for components and accessories.

Equipment must be properly grounded and fused according to its

rated current consumption (see ID plate).

Cables which run outside the unit must regularly be checked for

wear and tear or damage.

The conductors of cables connecting the unit to the main electrical

supply must have adequate diameters according to the rated current

consumption.

PM 106 701A

41-2300SP - Issued 1194 0 Nordson Corporation 1994

All Rights Resented

Dieses Handbuch passt für folgende Modelle

Andere Nordson Schmelzmaschine Handbücher

Nordson

Nordson EP 30 Bedienungsanleitung

Nordson

Nordson PURBlue 7156681A Bedienungsanleitung

Nordson

Nordson ProBlue Flex Bedienungsanleitung

Nordson

Nordson ProBlue Flex Bedienungsanleitung

Nordson

Nordson 3500 Series Stücklistenhandbuch

Nordson

Nordson 3400 Bedienungsanleitung

Nordson

Nordson ProBlue 1028303 Bedienungsanleitung

Nordson

Nordson VersaBlue VBN 50 Bedienungsanleitung

Nordson

Nordson 3500V Series Stücklistenhandbuch

Nordson

Nordson 3100 Bedienungsanleitung

Nordson

Nordson 3100V Series Referenzhandbuch

Nordson

Nordson 3930 Bedienungsanleitung

Nordson

Nordson DuraDrum Bedienungsanleitung

Nordson

Nordson AltaBlueA4TP Referenzhandbuch

Nordson

Nordson Mesa Fulfill Referenzhandbuch

Nordson

Nordson ProBlue Flex Bedienungsanleitung

Nordson

Nordson ProBlue P4 Referenzhandbuch

Beliebte Schmelzmaschine Handbücher anderer Marken

Bibby Sterilin

Bibby Sterilin Stuart SMP10 Bedienungsanleitung

Meler

Meler Cantho Bedienungsanleitung

Buchi

Buchi M-565 Bedienungsanleitung

Indutherm

Indutherm MU200 Bedienungsanleitung

GOLDBRUNN THERM

GOLDBRUNN THERM Goldbrunn 1000 Bedienungsanleitung

SCS

SCS Good COOKING Chocolate Melting Pot Bedienungsanleitung

Cole Parmer

Cole Parmer MP-400 Series Bedienungsanleitung

CIMLINE

CIMLINE MATRIX 1500 Betriebsanleitung

Graco

Graco THERM-O-FLOW T7 Series Bedienungsanleitung

VALCO MELTON

VALCO MELTON D4-L Bedienungsanleitung

Meler

Meler MACRO 200 Bedienungsanleitung

Viega

Viega ProRadiant Basic Digital Snow Melt Control... Merkblatt

Rapid

Rapid EG PEN Bedienungsanleitung

CIMLINE

CIMLINE MATRIX 1500 Betriebsanleitung

UES

UES perfectMelt Bedienungsanleitung

PRECIOUS PLASTIC

PRECIOUS PLASTIC INJECTION Bedienungsanleitung

VALCO MELTON

VALCO MELTON D10 Bedienungsanleitung

VALCO MELTON

VALCO MELTON D4-E Bedienungsanleitung