Nortel 4500 Series Bedienungsanleitung

Nortel Ethernet Routing Switch 4500 Series

Installation — SFPs and XFPs

Release: 5.2

Document Revision: 02.01

www.nortel.com

NN47205-301 324186-B

Nortel Ethernet Routing Switch 4500 Series

Release: 5.2

Publication: NN47205-301

Document release date: 20 October 2008

Printed in Canada, India, and the United States of America

LEGAL NOTICE

While the information in this document is believed to be accurate and reliable, except as otherwise expressly

agreed to in writing NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF

ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are

subject to change without notice.

Nortel, the Nortel logo, and the Globemark are trademarks of Nortel Networks.

Cletop is a trademark of NTT-ME Corporation.

IEEE is a trademark of the Institute of Electrical and Electronics Engineers, Inc.

Lucent is a trademark of Lucent Technologies, Inc.

All other trademarks are the property of their respective owners.

Contents

New in this release 5

Features 5

New SFPs 5

New XFPs 5

Introduction 7

Safety and equipment care information 9

Handling, safety, and environmental guidelines 9

Electrostatic discharge prevention 9

Care of fiber optic equipment 10

Fiber optic cable care 10

Fiber optic connector care 11

Cleaning single connectors 12

Cleaning duplex connectors 13

Cleaning receptacles 14

Product safety warnings and information 16

ESD and installation caution messages 16

Laser safety warnings 17

Small form factor pluggable transceivers 21

Selecting an SFP 21

Job aid: SFPs and common applications 22

Job aid: SFP models without DDI support 22

Job aid: SFP models with DDI support 24

Installing an SFP 24

Job aid: locking and extractor mechanisms 26

Removing an SFP 27

10 Gigabit small form factor pluggable transceivers 29

Selecting an XFP 29

Job aid: XFP models 30

Installing an XFP 30

Removing an XFP 32

Nortel Ethernet Routing Switch 4500 Series

Installation — SFPs and XFPs

NN47205-301 02.01

20 October 2008

SFP specifications 35

SFP labels 35

General SFP specifications 36

T1 SFP specifications 36

T1 SFP—default settings 39

1000BASE-T SFP specifications 39

1000BASE-SX (LC) SFP specifications 40

1000BASE-SX (MT-RJ) SFP specifications 41

1000BASE-LX SFP specifications 41

1000BASE-XD CWDM SFP specifications 42

1000BASE-ZX CWDM SFP specifications 43

1000BASE-SX DDI SFP specifications 43

1000BASE-LX DDI SFP specifications 44

1000BASE-BX DDI SFP specifications 44

XFP specifications 47

XFP labels 47

General XFP specifications 48

10GBASE-SR XFP specifications 48

10GBASE-LRM XFP specifications 50

10GBASE-LR/LW XFP specifications 52

10GBASE-ZR/ZW XFP specifications 53

Nortel Ethernet Routing Switch 4500 Series

Installation — SFPs and XFPs

NN47205-301 02.01

20 October 2008

New in this release

The following sections detail what’s new in Nortel Ethernet Routing Switch

4500 Series Installation — SFPs and XFPs (NN47205-301) for Release

5.2.

•“Features” (page 5)

Features See the following sections for information about feature changes:

New SFPs

Release 5.2 supports four new SFPs. See the following for more

information:

•“1000BASE-BX DDI SFP specifications” (page 44)

•“1000BASE-SX DDI SFP specifications” (page 43)

•“1000BASE-LX DDI SFP specifications” (page 44)

New XFPs

Release 5.2 supports two new XFPs. See the following for more

information:

•“10GBASE-LR/LW XFP specifications” (page 52)

•“10GBASE-LRM XFP specifications” (page 50)

Nortel Ethernet Routing Switch 4500 Series

Installation — SFPs and XFPs

NN47205-301 02.01

20 October 2008

6New in this release

Nortel Ethernet Routing Switch 4500 Series

Installation — SFPs and XFPs

NN47205-301 02.01

20 October 2008

Introduction

This document describes how to select, install, and remove an SFP or

XFP. It also provides specifications for each device.

Navigation •“Safety and equipment care information” (page 9)

•“Small form factor pluggable transceivers” (page 21)

•“10 Gigabit small form factor pluggable transceivers” (page 29)

•“SFP specifications” (page 35)

•“XFP specifications” (page 47)

Nortel Ethernet Routing Switch 4500 Series

Installation — SFPs and XFPs

NN47205-301 02.01

20 October 2008

8Introduction

Nortel Ethernet Routing Switch 4500 Series

Installation — SFPs and XFPs

NN47205-301 02.01

20 October 2008

Safety and equipment care information

This section contains important safety and regulatory information. Read

this section before you install Small Form Factor Pluggable (SFP)

transceivers or 10 Gigabit SFP (XFP) transceivers.

Navigation •“Handling, safety, and environmental guidelines” (page 9)

•“Care of fiber optic equipment” (page 10)

•“Product safety warnings and information” (page 16)

Handling, safety, and environmental guidelines

Before you install an SFP or XFP, read the following handling, safety, and

environmental guidelines:

•SFPs and XFPs are static sensitive. To prevent damage from

electrostatic discharge (ESD), see “Electrostatic discharge prevention”

(page 9).

•SFPs and XFPs use optical parts whose performance can be reduced

by dust contamination. When you store an SFP or XFP, or when you

disconnect it from a fiber optic cable, always keep a dust cover over

the optical bore.

•Dispose of this product according to all national laws and regulations.

Electrostatic discharge prevention

To prevent equipment damage, observe the following electrostatic

discharge (ESD) precautions when handling or installing the components.

•Ground yourself and the equipment to an earth or building ground. Use

a grounded workbench mat (or foam that dissipates static charge) and

a grounding wrist strap. The wrist strap should touch the skin and be

grounded through a one megaohm resistor.

•Do not touch anyone who is not grounded.

Nortel Ethernet Routing Switch 4500 Series

Installation — SFPs and XFPs

NN47205-301 02.01

20 October 2008

10 Safety and equipment care information

•Leave all components in their ESD-safe packaging until installation,

and use only a static-shielding bag for all storage, transport, and

handling.

•Clear the area of synthetic materials such as polyester, plastic, vinyl, or

styrofoam because these materials carry static electricity that damages

the equipment.

Care of ﬁber optic equipment

Fiber optic equipment connections must be kept clean and damage-free.

Use the information in this section to properly maintain and care for fiber

optic equipment.

Care of ﬁber optic equipment navigation

•“Fiber optic cable care” (page 10)

•“Fiber optic connector care” (page 11)

•“Cleaning single connectors” (page 12)

•“Cleaning duplex connectors” (page 13)

•“Cleaning receptacles” (page 14)

Fiber optic cable care

Although the glass fiber in fiber optic cable is protected with reinforcing

material and plastic insulation, it is subject to damage. Use the following

precautions to avoid damaging the glass fiber.

•Do not kink, knot, or vigorously flex the cable.

•Do not bend the cable to less than a 40 mm radius.

•Do not stand on fiber optic cable; keep the cable off the floor.

•Do not pull fiber optic cable any harder than you would a cable

containing copper wire of comparable size.

•Do not allow a static load of more than a few pounds on any section

of the cable.

•Place protective caps on fiber optic connectors that are not in use.

•Store unused fiber optic patch cables in a cabinet, on a cable rack, or

flat on a shelf.

Frequent overstressing of fiber optic cable causes progressive

degeneration that leads to failure.

Nortel Ethernet Routing Switch 4500 Series

Installation — SFPs and XFPs

NN47205-301 02.01

20 October 2008

Andere Handbücher für 4500 Series

Inhaltsverzeichnis

Andere Nortel Schalten Handbücher

Nortel

Nortel Centillion EtherSpeed II Leitfaden

Nortel

Nortel 700117 Handbuch

Nortel

Nortel AN/DC Bedienungsanleitung

Nortel

Nortel DMS-100 Series Bedienungsanleitung

Nortel

Nortel BayStack 5520-24T-PWR Bedienungsanleitung

Nortel

Nortel Passport 8250 Bedienungsanleitung

Nortel

Nortel 5510 Kurzanleitung

Nortel

Nortel DMS-100 Series Bedienungs- und Wartungsanleitung

Nortel

Nortel 5530 Bedienungsanleitung

Nortel

Nortel 1200N Bedienungsanleitung

Nortel

Nortel Passport 4400 Series Referenzhandbuch

Nortel

Nortel CVX 600 Handbuch

Nortel

Nortel Passport 7400 Handbuch

Nortel

Nortel NN47230-103 Bedienerhandbuch

Nortel

Nortel Application Switch Bedienungsanleitung

Nortel

Nortel 4600 Bedienungsanleitung

Nortel

Nortel Versalar 15000 Leitfaden

Nortel

Nortel 325 series Bedienungsanleitung

Nortel

Nortel 2300 Series Service-Handbuch

Nortel

Nortel BayStack 100-S Leitfaden

Nortel

Nortel BayStack 380-24F Bedienungsanleitung

Nortel

Nortel BayStack 400-2FX Bedienungsanleitung

Nortel

Nortel Contivity Extranet Switch 2500 Bedienungsanleitung

Nortel

Nortel BayStack 350 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung