NORTH STATES 4940 Bedienungsanleitung

Quality Products

for the way you live

IMPORTANT: PLEASE KEEP FOR FUTURE REFERENCE!

For helpful tips and instructions, please visit our website: www.northstatesind.com or

contact our Customer Care department via email: CustomerService@northstatesind.com

Phone: (763) 486-1756 or Toll Free: (800) 848-8421

INSTRUCTIONS FOR MODELS 4940/4946

Intended for use with children 6-24 months

A. Screws

B. Panel

C. Wall Fi ng C

D. Gate Panel

E. Wall Fi ng A

F. Wall Fi ng B

G. Floor Spacer D

H. Template

To ensure safe op on, add onal or replacement parts should be obtained only from North States or

its authorized distributors. Contact inform on appears on the cover of these in ons. Replacement

parts can be ordered at h //northstatesind.com/main/shop-parts/

Any damage to property during installa on or your safety gate is the sole responsibility of the end user.

Your safety gate contains

the following:

x8 x2

IMPORTANT: Retain for future reference – Read carefully

Read the en instru on before assembling and installing this product.

If you sell or give away this product, make sure you give this instru on to the new owner. Thank you.

x1 EFGH

Page 2

WARNING

• Children have died or been seriously injured when gates are not securely

installed. ALWAYS install and use gates as directed using all required parts.

• STOP using when a child can climb over yard or dislodge the gate.

• Install only with locking/latching mechanism securely engaged.

• To prevent falls, never use at top of stairs.

• NEVER use to keep child away from pool.

• This product will not necessarily prevent all accidents.

• NEVER leave child unattended.

• This product intended for use with children from 6 months up to 24

months of age.

• Periodically check all fasteners to be sure they are tight and secure, STOP

using 3-in-1Superyard if any parts are missing or become damaged.

• Hardware is included for use in sold materials only, such as wood or metal.

• Never leave anything in the 3-in-1 Superyard that could provide a foothold

or create a danger of suocation or strangulation.

Step 1: Unfold the 3-in-1 Superyard. Step 2: Pos on and adjust the se ons to a

hexagon. Turn se ons to align hexagonal

mark with arrow on opposite hinge (see

Figure 2).

Note: The Superyard should be placed on a

ﬂat surface.

Step 3: Remove the ve al

bars in both panels you wish

to connect. Turn clockwise to

loosen and pull down to

remove.

Step 4: Remove the

Socket Cap E.

Note: Keep for future

use as a barrier.

Page 3

Figure 2

Figure 3

Step 5: To connect the panels

together, ve ally li one panel

allowing the upper and lower

hinge housings to slip into place in

the ma ng panel (See Figure 4).

Figure 4

Figure 1

Step 6: Insert the

ve al bar into

recess of lower

hinge mount.

Press “A” down

and slide it into

upper hinge, as

shown in Figure

5B.

Note: When set

up as an

enclosure, you

will have one

extra ve al

bar.

Step 7: To secure gate as an enclosure, ten

each ve al bar counter-clockwise (hand- ht).

See Figure 5C.

Note: Loosen each ver l bar clockwise before

folding the Superyard for storage.

Properly set-up as an enclosure.

Page 4

Step 1: Unfold the 3-in-1 Superyard.

Step 2: Pos n the 3-in-1 Superyard to ﬁt in your opening.

Select the walls you wish to mount the hardware to.

Note: To accommodate diﬀerent sized openings, you can add

or remove an even number of panels. Add onal hardware is

available for purchase when using an odd number of panels.

Figure 5A Figure 5B

Figure 5C Figure 6

Step 3: On the end panels, remove the ve al

bars.

Turn clockwise to loosen the ve al bar, then

pull down to remove.

Note: To repos on the panel with the door,

simply follow the dire ons to set up the

Superyard as an enclosure. Select and

disconnect the two panels you desire to mount

to the wall or surface.

Page 5

Step 6: Place panels on the mounted wall

ngs, as shown in Figure 12A and 12B.

Step 7: Insert removable bars through wall

ng-C on both sides of gate, pos oning the

bars in lower hinge housing.

Step 4: Pos on the template ve al to the ﬂoor and

mark the screw holes. Mount the wall ngs A, B, C

onto the wall with screws included.

Step 5: A ach ﬂoor spacer-D to lower

hinge housing.

Figure 7

Figure 8A 8B 8C 8D 8E

Figure 9A 9B 9C 9A

Step 8: Insert the ve al bars

in the upper hinge housing and

upper hinge holder, rota ng

the hand grips un they are

hand- ht.

Page 6

Two-Panel Extensions sold

separately.

Note: An unlimited number of

panels can be added.

Figure 10A 10B

Figure 11A 11B

Procedure to open gate:

11A. Press the release bu on. 11B. Li the gate panel upward. 11C. Swing gate open.

Figure 12

Swing the gate to the open pos on to hold the gate open for easy access. See Figure 12.

Step 9: To secure gate as a

barrier, ten each ve al bar

counter-clockwise (hand- ht).

See Figure 10C.

Note: Loosen each ve al bar

clockwise before folding the

Superyard for storage.

10C

11C

GATE STAY-OPEN FEATURE

The stay-open feature is for adult use only. Once the gate is held open, the automa closing feature of

the gate will be disabled, so your child could move back and forth without res on.

Page 7

If the gate does not stay closed, verify that the mark in the le upper corner of the gate is aligned with the mark on the

upper locking housing, as shown in Figure 13C.

If the mark on the le upper corner does not align with the mark on the upper locking housing, please make the

adjustments below to ensure that the door panel can be auto closed.

If the upper locking housing is oﬀset toward the right (13A) or le (13B), please loosen the screw on upper locking housing ,

then adjust the door panel and upper locking housing un the two marks are aligned (13C). Make certain to re hten the

screw (13D).

13B

13C 13D

Note: Please use two

screwdrivers when tening

or loosening the screws (13D).

If the upper locking housing is misaligned upward (13E) or downward (13F), please loosen the screw on the door lower

hinge (13G), then press the door panel and the door lower hinge together (13H) un the two marks on the le corner are

aligned. Make sure the screw is re htened.

13E 13F

Figure 13A

13G 13H

Distributed exclusively in the United States by

North States Industries, Inc.

5455 Highway 169 N

Plymouth, MN 55442

www.northstatesind.com

Manufactured in

Guang Dong, China

Care

CLEANING:

Clean the Superyard using warm water and a mild detergent. Use a so cloth or sponge to avoid scratches. Never use

solvents or chemicals to clean the Superyard.

DISCLAIMER:

Any damage to property during installa n of your safety gate is the sole responsibility of the end user.

Productos de calidad

para su estilo de vida

INSTRUCCIONES PARA LOS MODELOS 4940/4946

IMPORTANTE: ¡CONSERVE COMO REFERENCIA FUTURA!

Para obtener consejos útiles e instrucciones, visite nuestro sitio web: www.northstatesind.com, o

Comuníquese con nuestro Departamento de Atención al Cliente por correo electrónico:

info@northstatesind.com

Teléfono: +1 (763) 486-1756 o número gratuito: (800) 848-8421

Diseñado para usarse con niños de 6 a 24 meses de edad

x8 x2

x1 EFGH

IMPORTANTE: Conserve este folleto para referencias futuras. Léalo detenidamente.

Lea todas las instrucciones antes de armar e instalar este producto.

Si vende o regala esta unidad, asegúrese de entregar al nuevo propietario estas instrucciones. Se lo agradecemos.

A. Tornillos

B. Panel

C. Accessorios para pared - C

D. Panel de puerta

E. Accessorios para pared - A

F. Accessorios para pared - B

G. Espaciador para piso D

Su puerta de seguridad

incluye lo siguiente:

Para asegurar el funcionamiento seguro, las piezas adicionales o de repuesto deben obtenerse únicamente de

North States o de sus distribuidores autorizados. La información de contacto aparece en la portada de estas

instrucciones.

Se pueden pedir piezas de repuesto en http://northstatesind.com/main/shop-parts/

Cualquier daño a la propiedad durante la instalación de su puerta de seguridad es exclusiva responsabilidad

usario fínal.

Página 9

ADVERTENCIA

• Niños han muerto o sufrido lesiones graves porque una puerta no estaba

instalada de manera segura. SIEMPRE instale y use la puerta conforme a las

instrucciones, utilizando todas las piezas requeridas.

• DEJE de usarla cuando un niño pueda trepar sobre la puerta o desprenderla.

• Instálela únicamente con el mecanismo de bloqueo y enganche

debidamente enganchado.

• Para evitar caídas, nunca utilice la puerta en la parte superior de las escaleras.

• NUNCA debe usarse para mantener a un niño alejado de una piscina.

• Este portón no necesariamente evita todos los accidentes.

• NUNCA deje a los niños sin supervisión.

• Este producto está diseñado para usarse con niños de 6 a 24 meses de edad.

• Compruebe periódicamente todos los jadores para asegurarse de que

están prietos y seguros; DEJE de utilizar 3-in-1 Superyard si faltan piezas o

están dañadas.

• Las piezas de instalción ajuntas sólo se deben usar en materiales solidos,

tales como la madera o el metal.

• No deje objetos en el 3-in-1 Superyard que podrían ser utilizados como

puntos de apoyo o constituir un peligro de asxia o estrangulación.

Step 1: Unfold the 3-in-1 Superyard. Step 2: Pos on and adjust the se ons to a

hexagon. Turn se ons to align hexagonal

mark with arrow on opposite hinge (see

Figure 2).

Note: The Superyard should be placed on a

ﬂat surface.

Step 3: Remove the ve al

bars in both panels you wish

to connect. Turn clockwise to

loosen and pull down to

remove.

Step 4: Remove the

Socket Cap E.

Note: Keep for future

use as a barrier.

Page 3

Figure 2

Figure 3

Step 5: To connect the panels

together, ve ally li one panel

allowing the upper and lower

hinge housings to slip into place in

the ma ng panel (See Figure 4).

Figure 4

Figure 1

Página 10

Figura 1

Figura 2

Figura 3

Tapa del oriﬁcio E

Soporte delabisagra inferior

Figura 4

Montaje como un cercado

Paso 1: Despliegue la Superyard 3 en 1. Paso 2: Ubique y ajuste las secciones para

formar un hexágono. Gire las secciones para

alinear la marca hexagonal con la ﬂecha en la

bisagra opuesta (vea la Figura 2).

Nota: Superyard debe colocarse sobre una

superﬁcie plana.

Paso 3: Quite las barras vercales

en ambos paneles que desee

conectar. Gírelas en sendo

horario para aﬂojarlas y re de

ellas hacia abajo para quitarlas.

Paso 4: Quite la tapa del

oriﬁcio E. Nota: Consérvela

para uso futuro como

barrera.

Paso 5: Para conectar los paneles

entre sí, levante vercalmente un

panel, permiendo que los

alojamientos de las bisagras superior

e inferior se deslicen a sus lugares en

el panel con el que se está acoplando

(vea la Figura 4).

Andere Handbücher für 4940

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NORTH STATES Sicherheitssensor Handbücher

NORTH STATES

NORTH STATES 5326 Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung