Norton clipper CT 601 B Bedienungsanleitung
CT 601 B
OPERATING INSTRUCTIONS
Translation of the original instructions
VERS.2023.02.28 CT 601 B_MAN_EN
2
VERS.2023.02.28 CT 601 B_MAN_EN
3
The undersigned manufacturer:
SAINT - GOBAIN ABRASIVES S.A.
190, BD. J. F. KENNEDY
L-4930 BASCHARAGE
Declares that this product:
Power Float: CT 601 B Code: 70184632582
is in conformity with the following Directives:
•"MACHINES" 2006/42/CE
•"ÉLECTROMAGNÉTIC COMPATIBILITY" 2014/30/CE
And the European standard
•EN 12649 –Concrete compactors and resurfacing
Valid for machines as of serial number: 230400011
Storage site for the technical documents:
Saint-Gobain Abrasives 190, Bd. J. F. Kennedy 4930 BASCHARAGE, LUXEMBOURG
This declaration of conformity loses its validity when the product is converted or modified without
agreement.
Bascharage, 28.02.2023.
François Chianese, executive officer and responsible for the technical file.
Bascharage, Luxembourg
Declaration of conformity
VERS.2023.02.28 CT 601 B_MAN_EN
4
The undersigned manufacturer:
SAINT - GOBAIN ABRASIVES S.A.
190, BD J.F. KENNEDY
L- 4930 BASCHARAGE
Declares that this product:
Masonry Saw: CT 601 B Code: 70184632582
is in conformity with the following standard:
•Supply of Machinery (Safety) Regulations 2008
•Electromagnetic Compatibility Regulations 2016
and European standard:
•EN 12649 –Concrete compactors and smoothing machines –Safety
Valid for machines with a serial number greater than: 230400011
Authorised Representative:
SAINT-GOBAIN ABRASIVES
Unicorn House • Unit 1, Amison Close
Redhill Business Park • Stafford • England • ST16 1WB
This declaration of conformity loses its validity when the product is converted or modified
without agreement.
Bascharage, Luxembourg, 28.02.2023
François Chianese, executive officer and responsible for the technical file.
Bascharage, Luxembourg
Declaration of conformity
VERS.2023.02.28 CT 601 B_MAN_EN
5
CT 601 B
OPERATING INSTRUCTIONS
1BASIC SAFETY INSTRUCTIONS 6
1.1 Symbols 6
1.2 Machine plate 7
1.3 Safety instructions for particular operating phases 7
2MACHINE DESCRIPTION 8
2.1 Short description 8
2.2 Purpose of use 8
2.3 Layout 8
2.4 Technical Data 10
2.5 Statement regarding the vibration emission 11
2.6 Statement regarding noise emission 12
3ASSEMBLY AND COMMISSIONING 13
3.1 Tool assembly 13
3.2 Quick reference guide for operation 14
3.3 Battery fixation and starting the machine 15
3.4 Charging the battery 15
4OPERATING THE MACHINE 16
4.1 Site of work 16
4.2 Preparing the site 16
4.3 Floating and finishing operation 16
5TRANSPORT AND STORING 18
5.1 Securing for transport 18
5.2 Transport procedure 18
5.3 Long period of inactivity 18
6MAINTENANCE AND SERVICING 19
7FAULTS: CAUSES AND CURES 21
7.1 Fault-finding procedures 21
7.2 Trouble-shooting guide 21
7.3 Customer service 22
7.4 Spare parts 23
VERS.2023.02.28 CT 601 B_MAN_EN
6
1 BASIC SAFETY INSTRUCTIONS
The CT 601 B is exclusively designed for the finishing of wet concrete floors mainly on construction
sites.
Uses other than the manufacturer's instructions shall be considered as contravening the regulations.
The manufacturer shall not be held responsible for any resulting damage. Any risk shall be borne
entirely by the user. Observing the operating instructions and compliance with inspection and
servicing requirements shall also be considered as included under use in accordance with the
regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following
symbols are used on the machine:
Read operator’s instructions
Ear protection and safety goggles must be
worn
Turn the knob in the indicated direction to tilt
(UP) or flatten (DOWN) the blades.
To prevent severe injuries, keep the feet and
fingers away from the rotating tool
VERS.2023.02.28 CT 601 B_MAN_EN
7
1.2 Machine plate
Important data can be found on the following plate located on the machine:
1.3 Safety instructions for particular operating phases
Before commencing work
•Read the present operator’s instructions booklet carefully.
•Before commencing work, make yourself familiar with the working environment at the place of
use. The working environment includes: obstacles in the area of work and manoeuvre, the
firmness of the floor, necessary protection at the site relating to public thoroughfares and the
availability of help in the event of accidents.
•Check for correct mounting of the tool regularly.
•Immediately remove damaged or badly worn tools, as they endanger the operator whilst rotating.
•Always use the machine with the safety guard ring, protection guards and electric box cover in
position.
•Only fit NORTON blades or plates to the machine! The use of other tools can damage the
machine!
•Attention is drawn to the use of BS2092 safety goggles in conformity with specified Processes
No.8 of the Protection of Eyes Regulation 1974, Regulation 2(2) Part 1.
Battery powered machine
•Always turn off the machine and separate it from the battery before any work on the machine is
done.
•Avoid contact of the electric connections with water projection or humidity.
•In case of emergency, you can stop the machine by releasing the dead-man handle.
•In the event of the machine breaking down or stopping for no apparent reason, switch off the
machine and separate it from the battery. Only a qualified electrician is allowed to investigate the
trouble and remedy the fault.
Ø Bore
Machine type
Serial number
Power
Safety standard
Machine Model
Machine Code
Blade speed
Weight
Year of
production
ØMaximum
blade
VERS.2023.02.28 CT 601 B_MAN_EN
8
2 MACHINE DESCRIPTION
Any modification, which could lead to a change in the original characteristics of the machine, may be
done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity with the
safety regulations.
2.1 Short description
The Mechanical Trowel CT 601 B is designed for durability and high performance for onsite finishing
operations on wet concrete floors.
As with all other NORTON products, the operator will immediately appreciate the attention given to
detail and quality of materials used in construction. The machine and its component parts are
assembled to high standards assuring long life and minimum maintenance.
2.2 Purpose of use
The Clipper Mechanical Trowel CT 601 B is designed for onsite finishing operations on wet concrete
floors. It is not designed for any other purpose.
2.3 Layout
6
2
4
3
7
5
1
VERS.2023.02.28 CT 601 B_MAN_EN
9
Handle (1)
Jig welded steel construction including 2 rubber grips. A dead-man handle (7) allows the operator to
work safely and to stop the machine at any moment. The angle of the machine arm can be adjusted
to operate the machine comfortably.
Pitch of the blades (2)
The pitch of the blades is controlled over a knob on the handle.
Belt drive and belt cover (3)
A centrifugal clutch inside the motor pulley drives the gear shaft through V-Belts. It allows to gradually
engage the tool rotation. The drive assembly is enclosed in a guard.
Safety guard ring (4)
A safety guard ring protects the operator from the rotation of the tool while offering an optimum view
of the working progress. This ring can rotate, in order to ease the finishing of floor up to walls.
Battery motor and control panel (5)
The eGX battery engine from Honda which integrates the battery directly on the engine
On the control panel you can find:
- The Power button
- The ON/OFF switch
- The 3 LEDs (green, orange and red) to indicate the state of the motor
Lifting eye (6)
To lift the machine easily and safely, a lifting eye is located over the motor. This allows a balanced
lifting of the machine.
VERS.2023.02.28 CT 601 B_MAN_EN
10
2.4 Technical Data
Technical data
Battery motor
1,8kW
Max. tool diameter
600mm
Rotation speed of the tool shaft
65-130 tr.min-1
Sound pressure level
61,6 dB (A) (ISO EN 11201)
Sound energy level
81,6 dB (A) (ISO EN 3744)
Type of tool
Blade or plate
Machine dimensions (LxWxH)
1560x650x1060mm
Weight (without battery)
68,5 kg
Weight (with battery)
75 kg
Battery technical data
Type of battery
Battery lithium ion rechargeable
Tension
DC 72V
Power capacity
720Wh
Rated capacity
10.0Ah
Temperature range
Charging
5 à 30°C
Operating
-15 à 40°C
Storage
-5 à 30°C
Charger technical data
Charger type
CC/CV quick charger
Input voltage
AC 100 à 240V
Input frequency
50/60Hz
Output voltage
DC 82.8V
Output current
8.5A
Inhaltsverzeichnis
Andere Norton Elektrowerkzeuge Handbücher
