888.829.2831 • 615.529.1250 - 3 -
Z3000™
•In Mobile situations, always position the turbine behind the spray technician.
•Do not spray into switches or power sockets.
•Do not allow the unit to run unattended.
•Unplug from outlet before cleaning, troubleshooting and/or servicing.
•Do NOT allow to be used as a toy. Close attention is necessary when used by or
near children.
•This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
•The use of a respirator, mask, or nose filter whenever there is a chance that
vapors may be inhaled, especially with prolonged usage is recommended.
•Consult a physician before use if you are pregnant or think you may be pregnant,
or if you have a diabetic condition.
•Norvell sunless solutions are not a sunscreen or a substitute for proper sun protection.
•Indoor Use ONLY. Do not use outdoors or on wet surfaces.
•Do not use your spray tan equipment near bathtubs, showers, basins, or other vessels
containing water.
•Do not immerse any portion of equipment in liquids. Do not operate the spray gun
if it is wet or leaking.
•Do not allow water to accumulate on the floor around the unit.
•Never handle the plug, cord, base unit, or spray gun with wet hands.
•To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
•Do not overload wall outlets. Overloaded wall outlets, lose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result in electric shock or fire.
•Do not use the equipment if power cord is damaged. In the event of damage,
discontinue use immediately. If the supplied cord is damaged, it must be replaced
by an authorized Norvell technician.
•Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the unit.
•Keep all electrical cord away from heated surfaces.
•Turn off all controls before unplugging. Do not unplug by pulling on cable. To unplug,
grasp the plug to remove from outlet, not the cable.
•Do not use an extension cord unless the cord complies with local region electrical
safety standards.
•Periodically inspect the power cord for signs of damage.
•Do not use the equipment with a voltage inverter or any device designed to convert
the electrical supply from a different source. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the outlet.
•Do not modify the machine plugs.
•Always plug the power cord into a properly configured grounded outlet.
