NOUS E6 Bedienungsanleitung
2
Button
Enter configuration mode: Press and hold the button for 5 seconds until the screen blinks, the
device will enter configuration mode
Shift C/F: Double-click to cycle switching between °С and °F temperature unit
Trigger to report: Single-click to report its current status to cloud server
Screen
3
On the back
Quick Installation Guide
Note: the smart gateway must be added first before adding the sub-device.
1.Power on the sensor
1).Open the battery cover
4
2).Insert the battery into the battery compartment
(please note battery positive and negative)
3).Close the battery cover
2.You will need Nous ZigBee GateWay/Hub. Open “Nous Smart Home” app, Enter the
gateway homepage and click “Add subdevice”
5
3.Press the reset button for 5 seconds, till the screen blink, then click the confirm button
which shows and "LED already blink" follow the in-app instructions to connect the sensor
to your gateway.
4.Waiting for a few seconds, This device is added successfully and you may rename it.
Click “Done” to finish the setting.
6
5.Put it where you need it.
6.Nous Smart Home app settings:
1).The temperature unit setting
2).The temperature update sensitivity setting
7
3).Limits setting of Low temperature alarm and High temperature alarm.
8
4).Enable/disable alarm setting
9
Inhaltsverzeichnis
Andere NOUS Temperaturregler Handbücher
Beliebte Temperaturregler Handbücher anderer Marken
Swegon
Swegon LUNAd MB Bedienungsanleitung
Lucky Reptile
Lucky Reptile Thermo Control II Bedienungsanleitung
SENSORMETRIX
SENSORMETRIX Argon 100 Bedienungsanleitung
Fuji Electric
Fuji Electric PXE4 Bedienungsanleitung
Yuyao gongyi
Yuyao gongyi XMT-808 series Bedienungsanleitung
Selec
Selec TC544C Bedienungsanleitung
