NovaStar VX2U Bedienungsanleitung

User's Manual

LED Display Video Controller VX2U/VX4U

Rev1.0.3NS160100228

XI'AN NOVASTAR TECH CO., LTD.

Statement

Welcome to use the product from Xi’an NovaStar Tech Co., Ltd. (hereinafter

referred to as “Novastar”). It is our great pleasure to offer this manual to help

you understand and use the product. We have striven for precision and reliability

during the compilation of this manual. Contents of this manual are subject to change

without notice. If you have any problem or suggestion in use, please feel free to

our utmost to satisfy your needs. We would like to express our sincere appreciation

and make an assessment of your suggestions for adoption as soon as possible.

No part of this manual may be reproduced or transmitted in any form or by any

means without prior written consent of NovaStar.

Trademark

is the registered trademark of NovaStar.

Safety

To avoid potential hazards, please use this unit according to the regulations. In case

of damages, non-professionals are not allowed to disassemble it for maintenance.

Please contact the after-sales department of NovaStar.

High voltage danger: The operating voltage range of this product is

100-240V AC.

Grounding: This product is grounded through grounding cord of power

supply. Please keep the grounding conductor well grounded.

Electromagnetic interference: The product should be kept far away

from magnets, motors and transformers.

Moisture proof: Keep the product in a dry and clean environment. In

the event of liquid immersion, please pull the plug immediately.

Keep away from flammable and explosive dangerous goods.

Prevent liquid or metal fragments from being dropped into the product

to avoid safety accidents.

XI'AN NOVASTAR TECH CO., LTD.

Contents

1 Model Description �� 1

2 Appearance�� 1

Front Panel ............................................................................................................................ 1

Rear Panel.............................................................................................................................. 2

3 Signal Connection�� 3

4 Dimensions�� 4

5 Operating Motion Instruction�� 4

6 Main Interface�� 4

7 Operation Instruction�� 5

Step1: Input Settings ......................................................................................................... 5

Step2: Screen Settings....................................................................................................... 6

Setp3: Brightness ................................................................................................................ 7

Setp4: Output Settings...................................................................................................... 7

Image Mosaic....................................................................................................................... 9

Advanced Settings............................................................................................................10

Factory Reset......................................................................................................................16

Communication Settings................................................................................................16

Language.............................................................................................................................16

8 Specifications ��16

9 FAQs ��17

XI'AN NOVASTAR TECH CO., LTD.

VX2U/VX4U User's Manual

-1-

1 Model Description

Model Description (input interface type)

VX2U Inputs: DVI×1, VGA×2, CVBS×2, HDMI×1, DP×1, USB×1

VX4U Inputs: DVI×1, VGA×2, CVBS×2, HDMI×1, DP×1, USB×1

Tips: The number, types, functions and specifications of the interfaces of VX2U and VX4U

are basically the same. In this manual, VX4U is described as an example.

2 Appearance

Front Panel

①:

Power switch

②:

Operation screen(Please see details in the Chapter: Main Interface.)

③:

Knob: Pressing the knob means Enter or OK and rotating the knob represents

selection or adjustment.

④:

ESC: Escape current operation or selection.

⑤:

Four control shortcuts

PIP: Enable/Disable PIP. The indicator light on denotes PIP is enabled, otherwise,

PIP is disabled.

SCALE: Enable/Disable screen scaling. The indicator light on denotes scale function

is enabled, otherwise, it is unavailable.

MODE: Shortcut menu for loading or saving dmodels. The indicator light is on

when entering the model or shortcut menu. The indicator light is off after exiting.

TEST: Shortcut for enabling or disabling test patterns. In case of entering test

picture, the indicator light is on, otherwise, the light is off.

⑥:

Shortcuts for switching of 10 signal input source. Press to set as the main

screen input source, and long press to set as PIP input source. The setting result

can be viewed on the operation screen while setting.

XI'AN NOVASTAR TECH CO., LTD.

VX2U/VX4U User's Manual

-2-

⑦:

Function keys�

TAKE: Shortcut for screen switching. After pressing TAKE key, PIP will be enabled.

Switching between MAIN and PIP will be realized after it is enabled.

Fn: Custom shortcut key.

⑧:

Flat mouth (Type A USB) is USB interface for connecting USB drive;

Square mouth (Type B USB) is USB control interface to connect PC for

communication.

Rear Panel

Inputs

Audio Audio Input

DP DP Input

HDMI HDMI Input

USB USB Drive Input

DVI DVI Input

CVBS1~CVBS2 PAL/NTSC TV composite video Inputs

VGA1~VGA2 2-Channel VGA Inputs

Outputs

DVI LOOP DVI LOOP Output

Monitor -VGA OUT VGA Monitoring Interface

Monitor -DVI OUT DVI Monitoring Interface

LED Out 1, 2, 3, 4 4-Channel Ethernet Output

Control

ETHERNET Network Control (Communication with PC, or Access

Network)

Type B USB port USB Control (Communication with PC, or Cascade IN)

Type A USB port USB Cascade OUT

Power

AC 100-240V ～ 50/60HZ AC Power Interface

XI'AN NOVASTAR TECH CO., LTD.

VX2U/VX4U User's Manual

-3-

Tip:Type A USB interfaces on both the front and rear panel are not allowed to connect PC

directly.

3 Signal Connection

Connect the required hardware equipments refering to the interface description of

the previous chapters.

If it is required to control more sets of VX4U units, please connect them according to

the figure below.

XI'AN NOVASTAR TECH CO., LTD.

VX2U/VX4U User's Manual

-4-

4 Dimensions

VX4U dimensions (Unit:mm)

5 Operating Motion Instruction

Knob:

Press the knob in the main interface to enter the interface of menu operation;

Rotate the knob to select menu or press the knob under the operation interface

of menu to select current menu or enter submenu;

Rotate the knob to adjust the parameter after selecting the menu with

parameter; press the knob again for confirmation after adjustment.

ESC: Return key, exit current menu or operation.

Key lock/unlock: long press knob and ESC key simultaneously.

6 Main Interface

After starting the controller, the main interface of OLED display is as follows:

1VGA1

2HDMI

1024x768@60Hz

NovaStar 192.168.0.10

25%

XI'AN NOVASTAR TECH CO., LTD.

VX2U/VX4U User's Manual

-5-

First row: Company name; the name and IP of the product are shown alternately;

Second row: Main screen 1; signal source; input signal format;

Third row: PIP 2; signal source; input signal format;

Forth row: Status bar. the meanings of all icons are shown below.

LED Output (it is output Port 2 in primary mode currently, and

the backup status is displayed as ).

PIP is disabled.

PIP is enabled.

The current effect is point-to-point display.

It is “scale down” mode.

It is “scale up” mode.

Image Mosaic is not enabled.

Image Mosaic is enabled.

It is USB control currently.

It is Ethernet port control currently.

Current brightness is 25%.

Key lock icon. When this icon appears at the main interface,

the keys and knob are locked.

7 Operation Instruction

VX4U has powerful functions and is easy to operate. All operations can be completed

through a knob and a return key. The design of shortcut keys makes the operations

more efficient.

Generally, LED display can work normally, and the brightness is moderate after

following four steps: Input Settings → Screen Settings → Brightness → Output

Settings. Other menus such as display control and advanced settings can help users

better control the LED display.

See the following section for detailed operation.

Step1: Input Settings

Set resolution of input signal. Resolution can be directly set and changed for digital

input interfaces DVI, HDMI and DP. Resolution can only be modified with other input

methods on input devices.

Input resolution can be set through two methods:

XI'AN NOVASTAR TECH CO., LTD.

VX2U/VX4U User's Manual

-6-

Method I: Preset Resolution.

Selection is made in preset resolution of the controller. If there is no preset

resolution, you can select the second method and customize resolution.

Brightness

Output Settings

25%

Screen Settings

Input Settings

1024x768

1280x1024

1366x768

1440x900

Preset Resolution

Custom Resolution

Method II: Custom Resolution.

Set Horizontal Res, Vertical Res and Custom· refresh rate and then select "Apply" and

press the knob for application. If the application is not confirmed, custom resolution

is invalid.

Width (H)

Height(V)

Custom Refresh Rate

Apply

1920

1080

60Hz

59.94Hz

50Hz

30Hz

Preset Resolution

Custom Resolution

Step2: Screen Settings

The precondition of Screen setting in shortcut is that the screen must be regular

rectangle (not special-shaped), cabinet must be regular rectangle and the size of

each cabinet are identical.

Step 1 The screen being power-on, if the cabinet is in normal display, enter into

Step 2; if the cabinet is in abnormal display, first, load the cabinet file, and

save it to the receiving card; see detailed operation in Advanced Settings ;

Step 2 Return to the “Screen Settings” submenu. Rotate the button to switch to

submenus of other options respectively to perform configurations, as shown

in the following figures:

Brightness

25%

Input Settings

Cabinet Row Qty

Cabinet Column Qty

Port 1 Cabinet Qty

Data Flow（Front View）

Screen Settings

Output Settings

Step 3 Set Cabinet Row Qty and Cabinet Column Qty according to the actual

situation of the screen;

Step 4 Set Port1 Cabinet Qty. The device has some limitations on the cabinet

quantity of ports. For details, see precautions for screen settings;

Step 5 Set the Data Flow (Front View). Pay attention to precautions for screen

settings c), d) and e) below.

XI'AN NOVASTAR TECH CO., LTD.

VX2U/VX4U User's Manual

-7-

Precautions for screen settings:

（a）If the number of ports

with loads is n (n≤4), the first

n-1 ports must load the same

number of cabinets, which must

also be an integral multiple of

the number of cabinet rows or

columns and be greater than or

equal to the number of cabinets

for the nth ports.

Example:

For example, if port 1, port 2, port 3 have loads,

port 1 and port 2 must have the same number of

cabinets, which must also be an integral multiple

of the number of cabinet rows or columns.

Therefore, you only need to set port 1 cabinet Qty

according to the actual situation when setting the

screen. The number of receiving cards port 3 loads

must be smaller than or equal to port 1.

（b）In the case of special-shaped cabinets, different cabinet sizes and special-

shaped screen, the NovaLCT-Mars software is required to be connected to configure

the screen.

（c）During Data Flow setting, you can rotate the button to see the effects of

different data flow on the screen in real time. If you are satisfied with the effect of

current data flow, you must press the button to save the setting. You can press the ESC

to exit from the current operation.

（d）During Data Flow setting, you must ensure that the data flow of each port is

downward in the same direction.

（e）During Data Flow setting, you must ensure that Port 1 is the start position of the

whole data flow connection.

VX4U can load 2.3 million (2048x1152@60Hz) pixels in maximum. The width of lateral

load can reach to 3840 pixels in maximum (3840x600@60Hz); the longitudinal load

can reach to 1920 pixels in maximum (1920 x1200@60Hz).

Setp3: Brightness

Return to the main menu interface. Press the Knob to select the corresponding value

of Brightness. You can rotate the Knob to adjust the value at this time.

Brightness

Screen Settings

Input Settings

Output Settings

25%

Brightness

Screen Settings

Input Settings

Output Settings

25%

Setp4: Output Settings

Output settings are divided into three cases:

First one: disable Scaling, i.e., the sizes of output image and input image are the

same, and original scale output is used. If the input resolution is smaller than the LED

XI'AN NOVASTAR TECH CO., LTD.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NovaStar Controller Handbücher

NovaStar

NovaStar NovaPro HD Bedienungsanleitung

NovaStar

NovaStar Thunderview S1 Bedienungsanleitung

NovaStar

NovaStar VX400 Bedienungsanleitung

NovaStar

NovaStar MBOX600 Bedienungsanleitung

NovaStar

NovaStar NovaPro UHD Bedienungsanleitung

NovaStar

NovaStar VX600 Bedienungsanleitung

NovaStar

NovaStar LVP6082 Bedienungsanleitung

NovaStar

NovaStar MCTRL660 PRO Bedienungsanleitung

NovaStar

NovaStar MCTRL R5 Bedienungsanleitung

NovaStar

NovaStar MX20 Bedienungsanleitung

NovaStar

NovaStar VX4S-N Bedienungsanleitung

NovaStar

NovaStar MX Series Bedienungsanleitung

NovaStar

NovaStar MBOX600 Bedienungsanleitung

NovaStar

NovaStar NovaPro UHD Jr Bedienungsanleitung

NovaStar

NovaStar VX4 Bedienungsanleitung

NovaStar

NovaStar MCTRL R5 Bedienungsanleitung

NovaStar

NovaStar MCTRL 4K Bedienungsanleitung

NovaStar

NovaStar VX4 Bedienungsanleitung

NovaStar

NovaStar VX16s Bedienungsanleitung

NovaStar

NovaStar NovaPro HD Bedienungsanleitung

NovaStar

NovaStar MX Series Bedienungsanleitung

NovaStar

NovaStar KU20 Bedienungsanleitung

NovaStar

NovaStar C1 Bedienungsanleitung

NovaStar

NovaStar MCTRL4K Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung