Novatel Lancer 3W Bedienungsanleitung

Lancer 3W™ Installation Guide

GI-01016628

Version 1.0

Lancer 3W Installation Guide

Safety Notices and Liabilities

Warning

This device is approved for vehicle-mount applications only.

The antenna must be installed to provide a minimum separation distance of 30 cm from all persons

(including users and bystanders) to satisfy FCC RF exposure requirements.

This product is not to be used in any environment where radio frequency equipment is prohibited or

restricted in its use. This includes aircraft/airports, hospitals, and other sensitive electronic areas.

Liability

Novatel Wireless, Inc. assumes no responsibility for the following:

•Any damage or loss resulting from the use of its products.

•Any loss or claims by third parties that may arise through the use of its products.

•Any damage or loss caused by the loss of data as a result of malfunctions or repairs. Be sure to make

backup copies of important data on other media to protect against data loss.

The information disclosed herein is the exclusive property of Novatel Wireless, Inc. and no part of this

publication may be reproduced or transmitted in any form or by any means including electronic storage,

reproduction, execution or transmission without the prior written consent of Novatel Wireless, Inc. The

information contained in this document is subject to change without notice and should not be construed

as a commitment by Novatel Wireless unless such commitment is expressly given in a covering

document.

Warranty

Warranty Period: Lancer 3W is covered for three (3) years from the date you acquire the product. Novatel

Wireless warrants that during the Warranty Period, Lancer 3W ("Product") will be free from defects in

material and workmanship under normal use. THESE WARRANTIES ARE EXPRESSLY IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

NOVATEL WIRELESS LIABILITY HEREUNDER IS EXPRESSLY LIMITED TO REFUND OF ALL

AMOUNTS PAID TO NOVATEL WIRELESS FOR ANY DEFECTIVE UNITS OF PRODUCT, WHETHER

NOVATEL WIRELESS LIABILITY ARISES FROM ANY BREACH OF ITS' EXPRESS WARRANTY,

BREACH OF ANY OBLIGATION ARISING FROM BREACH OF WARRANTY, OR OTHERWISE WITH

RESPECT TO THE MANUFACTURE AND SALE OF ANY UNITS OF THE PRODUCT, WHETHER

LIABILITY IS ASSERTED IN CONTRACT OR TORT, INCLUDING NEGLIGENCE AND STRICT

PRODUCT LIABILITY. NOVATEL WIRELESS SHALL IN NO EVENT BE LIABLE FOR SPECIAL,

INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE DUE TO ANY

CAUSE.

Purchaser's exclusive remedy for a claim under this warranty shall be limited to the repair or replacement,

at Novatel Wireless' option, of defective or non-conforming materials, parts or components. The

foregoing warranties do not extend to (I) non conformities, defects or errors in the Product due to

Lancer 3W Installation Guide

accident, fire, flood, abuse, misuse or negligent use of the Product or use in other than a normal and

customary manner, environmental conditions not conforming to Novatel Wireless' specification, or failure

to follow prescribed installation, operating and maintenance procedures, (II) defects, errors or

nonconformities in the Product due to modifications, alterations, additions or changes not made in

accordance with Novatel Wireless' specifications or authorized by Novatel Wireless, (III) normal wear and

tear, (IV) damage caused by force of nature or act of any third person, (V) service or repair of Product by

the Purchaser without prior written consent from Novatel Wireless, (VI) Products designated by Novatel

Wireless as beta site test samples, experimental, developmental, reproduction, sample, incomplete or out

of specification Products, or (VII) returned Products if the original identification marks have been removed

or altered.

Lancer 3W Installation Guide

iii

Interference Statements

Federal Communications Commission

Radio Frequency Interference Statement

This equipment has been tested according to the limits for a Class B digital device pursuant to FCC

part 15. These limits are designed to provide reasonable protection against harmful interference in

residential situations. This equipment generates, uses, and can radiate radio frequency energy. If not

installed and used in accordance with the instructions, it may cause harmful interference to radio or

television reception. To correct the interference, try one or more of the following measures:

•Reorient or move the receiving antenna of the selected television, radio or cordless telephone.

•Increase the space between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different than its current connection.

•Consult the dealer or an experienced radio/television technician.

Caution

Changes to this equipment not expressly approved by Novatel

Wireless, Inc. could void your authority to operate the equipment

with your local service provider.

ICES-003 Statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

Lancer 3W Installation Guide

Table of Contents

1INTRODUCTION................................................................................1-1

1.1 Configuration ....................................................................................................................................1-1

1.2 Contents ............................................................................................................................................1-1

1.3 Accessories.......................................................................................................................................1-2

2MODEM COMPONENTS ...................................................................2-1

2.1 Power Connector ..............................................................................................................................2-1

2.2 LED Indicators...................................................................................................................................2-2

2.3 Data Connector .................................................................................................................................2-3

2.4 Modem Antenna Connector.............................................................................................................2-3

3LANCER 3W SETUP .........................................................................3-1

3.1 Planning A Location.........................................................................................................................3-1

3.2 Antenna Location..............................................................................................................................3-2

3.2.1 Covert Layout (Internal Antenna).............................................................................................3-2

3.2.2 Normal Layout (External Antenna)...........................................................................................3-2

3.3 Modem Location ...............................................................................................................................3-3

3.4 Cable Layout .....................................................................................................................................3-3

3.4.1 Serial Cable Routing................................................................................................................3-4

3.5 Mounting and Connecting Equipment............................................................................................3-4

3.5.1 Mounting The Antenna.............................................................................................................3-5

3.5.2 Mounting The Modem..............................................................................................................3-6

3.5.3 Connecting The Cables ...........................................................................................................3-6

3.5.4 Connecting The Power Cable..................................................................................................3-7

4INSTALLING MODEM SOFTWARE ..................................................4-1

4.1 Install Wireless Modem Manager Software....................................................................................4-1

4.2 Configure The Modem......................................................................................................................4-2

4.3 Run Wireless Modem Manager........................................................................................................4-2

4.3.1 Icon Display with Windows 95/98/NT/2000………………………………………………………...4-3

4.3.2 Icon Display With Windows CE................................................................................................4-3

Lancer 3W Installation Guide

5EQUIPMENT SPECIFICATIONS........................................................5-1

5.1 Power Savers ....................................................................................................................................5-2

5.1.1 Transmitting .............................................................................................................................5-2

5.1.2 Sleep Mode..............................................................................................................................5-2

6COVERAGE INFORMATION.............................................................6-1

7TROUBLESHOOTING .......................................................................7-1

8TECHNICAL SUPPORT.....................................................................8-1

8.1 User Information...............................................................................................................................8-1

8.2 Services Offered By Technical Support.........................................................................................8-2

9INSTALLATION NOTES ....................................................................9-1

Lancer 3W Installation Guide

1-1

Example of Installed Lancer 3W

1 Introduction

This manual describes procedures to install a Lancer 3W Modem in a vehicle. Please read

this Installation Guide completely before starting the installation process. For information on

alternate installations please contact our technical support department at

1-888-888-9231 or email at support@novatelwireless.com

RECOMMENDED INSTALLATION PERSONNEL

We recommend a professional installation

using qualified personnel experienced in

installing mobile radios. This installation

requires knowledge of the following to

avoid hazards and damage to the modem

and vehicle wiring:

•Vehicle cable routing

•Radio transmission

•Antenna location

•Automotive wiring

1.1 Configuration

The Lancer 3W Modem can be purchased in

the following configurations:

•Base Model (available in bulk or individual packaging)

•GPS Modem (available in bulk or individual packaging)

1.2 Contents

The Lancer 3W package ships with the following:

•Lancer 3W Modem

•Power Cable (15’)

•Serial Cable (15’ DB-9)

•Mounting Hardware

•CD-ROM with Modem Manager software

•Installation Guide

Lancer 3W Installation Guide

1-2

1.3 Accessories

The following accessories are available:

•GPS add-on card

•Console mounting kit

•Quick release bracket

•Power Cable (15’)

•Serial Cable (15’ DB-9)

Lancer 3W Installation Guide

2-1

2 Modem Components

The modem front and rear panels are shown in the figures below.

Figure 1. Modem LEDs and Connections

2.1 Power Connector

The power connector for the Lancer 3W is a Molex

connector that mates with Molex connectors

(39-01-2040 or 39-01-2045). The pinout (looking

into the modem) is shown below.

Alert

Ignition

GND

PWR

The following table lists power-pin colors and describes their function:

Table 1. Power Connector Pin Descriptions

Pin Color Function Description

1 White Alert Can be connected to horn to provide an alert signal.

2 Green Ignition Keeps modem operational for a user defined time

period after the key is removed from the ignition switch.

3 Black Gnd Common Vehicle Ground (negative battery terminal)

4 Red Power Vehicle power lead (positive battery terminal)

Power Cable Connector

These LEDs (or signal indicators)

show the modem operating status.

See section 2.2 LED Indicators on

page 2-2 for details.

These connectors are for use in

connecting cables. See section

3.5.3 Connecting The Cables on

page 3-6 for details.

Front panel

Rear panel

Lancer 3W Installation Guide

2-2

2.2 LED Indicators

The modem has five LED indicators on its front panel as shown in Figure 1. The following

table explains functions of each LED:

Table 2. LED Indicators

LED Function Description

SVC Service • Blinking at a slow rate indicates that the modem is actively

searching for a CDPD Channel.

• Blinking at a fast rate indicates that the modem is attempting to

• Steady on indicates that the modem is registered on the CDPD

network.

• Steady off indicates either; -

• No power is being applied to unit.

• The modem is not configured to register.

RDY Ready • Steady on indicates that the modem is registered on the CDPD

network, locked on to a channel and capable of sending and

receiving data.

• Steady off indicates one of the following:

• Lack of power.

• The modem is not configured to register.

• The modem is not locked to a CDPD channel.

• The modem is out of coverage.

ACT RF Activity This LED is on when the modem attempts to send or retrieve a data

packet. To receive a data packet, the packet IP must be valid for

reception. A packet discarded by IP screening or friends mode will

not activate this indicator.

SIG Signal Quality This LED shows the quality of a signal as follows:

• Blinking at a slow rate indicates a poor signal (RSSI of less

than -100 dBm).

• Blinking at a fast rate indicates a moderate signal (RSSI of less

than -80 dBm).

• If the BLER is higher than 3% then the quality level will be

reduced to the next lower indication.

• Steady on indicates that signal is good, RSSI is above -80 dBm.

• Steady off indicates no signal present.

GPS GPS Lock This LED shows one of the following conditions:

•Steady on indicates that the GPS module has locked on to one

or more satellites.

• Steady off indicates that the GPS unit is not installed, not active

or cannot lock on to at least one satellite.

Inhaltsverzeichnis

Andere Novatel Modem Handbücher

Novatel

Novatel Ovation MC990D Bedienungsanleitung

Novatel

Novatel Ovation MC551 Bedienungsanleitung

Novatel

Novatel U620L Bedienungsanleitung

Novatel

Novatel Merlin for GPRS G301 Bedienungsanleitung

Novatel

Novatel Ovation U727 Bedienungsanleitung

Novatel

Novatel Merlin C777 Bedienungsanleitung

Novatel

Novatel Ovation MC551 Bedienungsanleitung

Novatel

Novatel Ovation MCD3000 Bedienungsanleitung

Novatel

Novatel Expedite L10-G Kurzanleitung zur Einrichtung

Novatel

Novatel USB730L Betriebsanleitung

Novatel

Novatel Ovation MC996D Bedienungsanleitung

Novatel

Novatel SA-G+ Bedienungsanleitung

Novatel

Novatel Ovation MC950D Bedienungsanleitung

Novatel

Novatel Merlin U740 Bedienungsanleitung

Novatel

Novatel Ovation U727 Bedienungsanleitung

Novatel

Novatel Ovation U727 Bedienungsanleitung

Novatel

Novatel Merlin U730 Bedienungsanleitung

Novatel

Novatel Minstrel 540 Bedienungsanleitung

Novatel

Novatel Ovation U727 Bedienungsanleitung

Novatel

Novatel Ovation MC545 Bedienungsanleitung

Novatel

Novatel U547 Turbo Stick Bedienungsanleitung

Novatel

Novatel Ovation MC545 Bedienungsanleitung

Novatel

Novatel Ovation MC998D Technisches Datenblatt

Novatel

Novatel Broadband2Go Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung