Novell CLIENT FOR LINUX 2.0 Bedienungsanleitung

Novell

www.novell.com

QUICK START

novdocx (en) 26 August 2007

Novell Client 2.0 for Linux Installation Quick Start

ClientTM for Linux

2.0

September 18, 2007

Installing the Novell Client for Linux

This quick start explains how to install the Novell Client for Linux* software on a workstation.

“System Requirements” on page 1

“Installing the Novell Client Using the YaST Control Center” on page 2

“Installing the Novell Client Using the Installation Script” on page 3

“Upgrading From a Previous Version” on page 4

“Uninstalling the Novell Client for Linux” on page 5

For information on installing a preconfigured version of the Novell Client, see “Using Configuration

Files to Preconfigure the Novell Client” in the Novell Client for Linux Administration Guide.

SYSTEM REQUIREMENTS

The Novell Client 2.0 for Linux requires workstations running one of the following:

SUSE®Linux Enterprise Desktop 10 SP1 (32-bit or 64-bit)

openSUSE 10.2 (32-bit or 64-bit)

IMPORTANT: For this release, you should not install the 32-bit version of the Novell Client 2.0 for

Linux onto a 64-bit operating system. If you do so, you will lose the ability to log into the GUI

credential provider. You will see the error message, “Authentication Failed,” and will be unable to

If you want to use the precompiled Novell Client for Linux Virtual File System provided with the

distribution, make sure one of the following packages is installed on your workstation before you

install the Novell Client for Linux. Which package is installed depends on your kernel type.

novfs-kmp-default

novfs-kmp-smp

novfs-kmp-bigsmp

novdocx (en) 26 August 2007

If you want to compile the Novell Client for Linux Virtual File System from sources provided with

the Novell Client for Linux, make sure the following packages are installed on your workstation

before you install the Novell Client for Linux:

gcc

kernel-source

make

For information on using YaST to install packages, see “Installing the Required Packages” in the

Novell Client for Linux Administration Guide.

INSTALLING THE NOVELL CLIENT USING THE YAST CONTROL CENTER

Installing the Novell Client for Linux using YaST requires the following steps:

1. Installing the Novell Client for Linux Packages

2. Starting or Restarting the Novell Client for Linux

Installing the Novell Client for Linux Packages

1Launch the YaST Control Center.

GNOME: Click Computer > More Applications > System > YaST.

KDE: Click the menu button > System > YaST.

2If you are not logged in as root, type the root password, then click Continue.

3Click Software in the left column, then click Add-on Product in the right column.

4Select the appropriate Add-on Product source (such as CD, DVD, or Local Directory), then

click Next.

TIP: Select Local Directory if you downloaded the file from Novell Downloads (http://

download.novell.com).

5Follow the on-screen instructions for the installation source you specified in Step 4.

For example, you might be prompted to insert the Novell Client for Linux CD, or specify

which local directory contains a copy of the downloaded Novell Client for Linux files.

6Select Yes, I Agree to the License Agreement, then click Next.

7Select Patterns from the Filter drop-down list.

8Select Novell Client for Linux in the Additional Software category.

9The Novell Client for Linux check box should already be selected. If it is not, select it to

automatically select all packages for installation.

10 Click Accept to install all of the Novell Client for Linux packages.

novdocx (en) 26 August 2007

11 Start the Novell Client for Linux.

See “Starting or Restarting the Novell Client for Linux” on page 3.

For more information, see “Using the Novell Client Tray Application” in the Novell Client for Linux

User Guide.

Starting or Restarting the Novell Client for Linux

Use any of the following methods to start or restart the Novell Client for Linux:

Restart the Linux Workstation: This is the best way to ensure that the Novell Client for

Linux is completely restarted.

Manually Start the Novell Client: Open a terminal window and log in as root. From the

/opt directory, enter one of the following commands:

New Installations: /opt/novell/ncl/bin/ncl_control start

This command loads all the Novell Client for Linux daemon modules.

Updates: /opt/novell/ncl/bin/ncl_control restart

This command stops and then reloads all the Novell Client for Linux daemon modules.

If either of these commands displays any errors, restart the Linux machine.

In addition, /opt/novell/ncl/bin/ncl_control status shows whether the NCL drivers

are loaded properly or not, and /opt/novell/ncl/bin/ncl_control stop stops all Novell

Client for Linux daemon modules.

INSTALLING THE NOVELL CLIENT USING THE INSTALLATION SCRIPT

An installation script called ncl_install is provided in the Novell Client for Linux .tar.gz file

you downloaded from Novell Downloads (http://download.novell.com). This script can be used to

install, update, verify installation, display information, and uninstall the Novell Client directly from a

command prompt using documented RPM commands. This same script is copied to the /opt/

novell/ncl/bin directory during the installation of the Client for later use in verifying or

uninstalling the Client.

Run these commands from the directory where you unarchived the Client download file or from

/opt/novell/ncl/bin after the initial installation. You must be logged in as root to run these

commands.

novdocx (en) 26 August 2007

Table 1 ncl_install Commands

UPGRADING FROM APREVIOUS VERSION

To upgrade from the Novell Client 1.2 for Linux to the Novell Client 2.0 for Linux using YaST, follow

these steps. You can also use the ncl_install script to upgrade to 2.0 (see “Installing the Novell

Client Using the Installation Script” on page 3 for more information).

1Launch the YaST Control Center.

GNOME: Click Computer > More Applications > System > YaST.

KDE: Click the menu button > System > YaST.

2Click Software > Installation Source.

3Select the Novell Client 1.2 for Linux source, click Delete, then click Yes.

4Click Finish.

5In the YaST Control Center, click Software > Add-on Product.

6Select your Novell Client 2.0 for Linux installation source (such as CD or Local Directory),

then click Next.

7Follow the on-screen instructions for the installation source you specified in Step 6.

For example, you might be prompted to insert the Novell Client for Linux CD, or specify

which local directory contains a copy of the downloaded Novell Client for Linux files.

Command Description

./ncl_install install Installs the Novell Client for Linux.

./ncl_install install force Forces the installation of all Novell Client

for Linux packages.

./ncl_install upgrade Upgrades the Novell Client for Linux.

./ncl_install upgrade force Forces the upgrade of all Novell Client for

Linux packages.

./ncl_install uninstall Uninstalls all Novell Client for Linux

packages.

./ncl_install verify Verifies the installation of all installed

Novell Client for Linux packages.

./ncl_install information Displays summary information for all

installed Novell Client for Linux packages.

./ncl_install files Displays a list of all files contained in the

Novell Client for Linux packages.

novdocx (en) 26 August 2007

8Select Yes, I Agree to the License Agreement, then click Next.

If you see Dependency Conflict messages informing you that the Novell Client cannot be

installed because of missing NICI and NMASTM dependencies:

8a Select Install novell-nmasclient although it would change the architecture, then click

OK– Try Again.

8b Select Install nici although it would change the architecture, then click OK– Try Again.

9Select Patterns from the Filter drop-down list.

10 Make sure Novell Client for Linux is selected in the Pattern list (It should already have a

check in the checkbox).

You should see all of the Novell Client for Linux packages in the package summary list. All

packages should be selected for installation except for novell-xtier-xplat (which is

unchecked).

11 Select novell-xtier-xplat for installation.

12 Right-click the novell-client package in the package summary list, then select All in This

List > Update if newer version available.

The icons to the left of the packages in the package summary list will change from a

checkmark to the update symbol, except for novell-xtier-xplat.

13 Click Accept to install all of the selected packages.

You will see all the packages being installed on the Package Installation dialog box, followed

by the SuSEconfig dialog box.

14 Start the Novell Client for Linux.

See “Starting or Restarting the Novell Client for Linux” on page 3.

UNINSTALLING THE NOVELL CLIENT FOR LINUX

Uninstall the Novell Client for Linux using either of the following methods:

“Uninstalling Using the YaST Control Center” on page 5

“Uninstalling Using the Installation Script” on page 6

Uninstalling Using the YaST Control Center

1Launch the YaST Control Center.

GNOME: Click Computer > More Applications > System > YaST.

KDE: Click the menu button > System > YaST.

2Click Software in the left column, then click Software Management in the right column.

3Select Patterns from the Filter drop-down list.

novdocx (en) 26 August 2007

4Select Novell Client for Linux from the Additional Software category to see the list of installed

packages.

5Click the check box to the left of Novell Client for Linux until a trash can appears.

This automatically selects all of the packages that need to be deleted by changing their icons

to a trash can.

If the Novell Client 2.0 for Linux was installed as an upgrade to the Novell Client 1.2 for

Linux, the novell-xtier-xplat package icon is not automatically changed to the trash

can.

6Right-click the novell-client package, select All in This List, then click Delete.

7Click Accept to delete all of the selected packages.

YaST might display the following dependency conflict:

product:Client_for_Linux-2.0.0.i686 has missing dependencies

If YaST displays this dependency conflict, select delete Client_for_Linux, then click OK - Try

Again.

YaST displays the progress of the uninstall.

Uninstalling Using the Installation Script

To uninstall the Novell Client for Linux using the installation script, enter./ncl_install

uninstall in a terminal window. You can run this command from the directory where you

unarchived the Client download file or from the /opt/novell/ncl/bin directory. You must be

logged in as root to run this command.

Legal Notice

transmitted without the express written consent of the publisher. For a list of Novell trademarks, see the Novell Trademark and Service Mark list

(http://www.novell.com/company/legal/trademarks/tmlist.html). All third-party trademarks are the property of their respective owners. A

trademark symbol (®, TM, etc.) denotes a Novell trademark; an asterisk (*) denotes a third-party trademark.

Andere Handbücher für CLIENT FOR LINUX 2.0

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Novell Software Handbücher

Novell

Novell APPARMOR - AND Technisches Handbuch

Novell

Novell LINUX ENTERPRISE DESKTOP 11 - ADMINISTRATION GUIDE... Bedienungsanleitung

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3... Technisches Handbuch

Novell

Novell LINUX ENTERPRISE SERVER 10 SP2 - STARTUP GUIDE... Benutzerhandbuch

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ZENWORKS REPORTING SERVER 10.3... Bedienungsanleitung

Novell

Novell CLIENT FOR LINUX 1.1 Bedienungsanleitung

Novell

Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ... Bedienungsanleitung

Novell

Novell ACCESS MANAGER 3.1 SP1 - ADMINISTRATION Bedienungsanleitung

Novell

Novell LINUX ENTERPRISE 11 SP1 - LINUX AUDIT Bedienungsanleitung

Novell

Novell OPEN ENTERPRISE SERVER 2 SP2 - PLANING AND IMPLEMENTATION GUIDE... Bedienungsanleitung

Novell

Novell ACCESS MANAGER 3.1 SP2 - README 2010 Bedienungsanleitung

Novell

Novell APPARMOR 2.0.1 - ADMINISTRATION GUIDE... Bedienungsanleitung

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3... Bedienungsanleitung

Novell

Novell EDIRECTORY 8.8 - GUIDE Bedienungsanleitung

Novell

Novell PLATESPIN ORCHESTRATE 2.0.2 - HIGH AVAILABILITY CONFIGURATION GUIDE... Bedienungsanleitung

Novell

Novell PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE... Service-Handbuch

Novell

Novell GROUPWISE 8 - LINUX-MAC CLIENT Bedienungsanleitung

Novell

Novell SENTINEL 6.1.1.0 - README Bedienungsanleitung

Novell

Novell OPEN ENTERPRISE SERVER 2.0 SP2 - DOMAIN SERVICE FOR... Bedienungsanleitung

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3... Bedienungsanleitung

Novell

Novell LINUX ENTERPRISE DESKTOP 10 SP2 Bedienungsanleitung

Novell

Novell SUPPORT ADVISOR - 04-2010 Bedienungsanleitung

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3... Kurzanleitung

Novell

Novell BUSINESS CONTINUITY CLUSTERING 1.0 -... Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Lexmark

Lexmark Apps Service-Handbuch