NRI G-13.6 Series Leitfaden

Description

Electronic Coin Validator

G-13.6000

11/03 JBe/vBi/ds

Edition 3.2

AB.136-GB

Technical Documentation

National Rejectors, Inc. GmbH • Zum Fruchthof 6 • 21614 Buxtehude • Telephone: 04161/729-0 • Telefax: 04161/729 115

The coin validator system G-13.6000

The advantages at a glance:

• 2devicesinone,duetothe2x12configuration

• greatfunctionalvariety

• measuringsystemwithreliablerejectionoffalsecoins

• highprotectionagainstmanipulation

• awake-upmode enables operationwitha battery oran

accumulator

Preface Thisdescriptiongivesyouasurveyofthemostimportantfeatures

oftheprovencoinvalidatorsystemG-13.6000includingitsvariants.

Theappendixcontainsthetechnicaldata,electriccircuitdiagrams

andviewsofthedevices.

Ifyouhaveanyquestionspleasedonothesitatetocontactus.Our

salesstaffwillprovideanyinformation.

NationalRejectors,Inc.GmbH

NationalRejectors,Inc.GmbH,Buxtehude

G-13.6Tableofcontents

Table of contents

1 Generalinformation........................................ 4

Interesting facts about the coin validator system

G-13.6000 ................................................................ 4

Variants.................................................................... 5

2 Characteristic features of the system ........... 6

Measuring system.................................................... 6

Adjustment of the channels...................................... 6

Singleblocking ......................................................... 7

Sorting outlets .......................................................... 7

String recognition ..................................................... 7

TeachMode ............................................................. 8

Block switch-over................................................... 10

3 Description of the variants .......................... 11

Standard coin validator........................................... 11

Casino variant ........................................................ 11

Totalizers ............................................................... 12

Timer variant .......................................................... 13

2-price totalizer ...................................................... 15

TVtotalizer ............................................................. 16

APPENDIX ................................................................ 19

Cleaning.............................................................................. 20

Technical Data.................................................................... 21

Assignment of pins, standard coin validators......... 22

Assignment of pins, totalizer.................................. 22

NationalRejectors,Inc.GmbH,Buxtehude

1 General information

Interesting facts about the coin validator system

G-13.6000

ThevalidatorG-13.6000isaworldwideestablishedproductforthe

machineindustryinstandardized3 1/2"format.Duetoitsmodular

designandthecompactconstructionthevalidatoristheoptimum

solutionfortheamusementandservicesindustry.

Dueto the CMOSprocessor and an electronic system that isdone

completelyinSMDtechniqueagreater functional variety,an

improved measuring system and a greater protection against

manipulationarepossible.Apartfromthatthesystemnowprovides

2x12 coin channels.

Startingwithnumber/1(markingwithinthemodelnumber)theG-

13.6000offersthepossibilitytochoosefromtwoconfigurations

(blocks)with12coinchannelseach.Theseblocksmaybe

programmedinadifferentwayandthuscanobtaindifferentcoin

combinations.Thisfeatureisparticularlysuitableforflexibleswitching

overfromonecurrencytotheother.

Duetotheshortswitching-ontimeoperationinaso-calledwake-up

mode is possible. A sensor located in front of the coin slot switches

thecoinvalidatingsystemon.Thefeatureisofgreatadvantagefor

devicesthatareoperatedwithabatteryoranaccumulator.

Theteachmode offersmoreflexibilitytotheoperatorwhenselecting

coinsandtoken.Withoutanyadditionalhelponlybyusingtheteach

modeyoucanprogrammequicklycoinsortokenonsite.

Likeallelectroniccoinvalidatorsystems fromNRIthedevicesofthe

seriesG-13.6000/G-13.7000 can be adjusted by means of a

programming station.Forthis youneed an IBM compatible PC and

theadjustmentprogramme KUNEMP.(Formore information referto

NRI.)

Before changing the device take care that the supply

voltage is switched off.

G-13.6Generalinformation

NationalRejectors,Inc.GmbH,Buxtehude

Variants

TheseriesG-13.6xxxcombinesallvariantswithout afrontplate,

whereastheseriesG-13.7xxxcombines allvariants with a front

plate.

Wedistinguishbetweentwoproductserieswiththreeresp.four

variants

1. Standard coin validator G-13.6000/G-13.7000

6paralleloutputlines

2. Casino variant G-13.6100

– fastcoinacceptance

– V2Aenforcement

3. Timervariant G-13.6200/G-13.7200

– adjustablelengthofthe

outputpulse

4. 2 - price totalizer G-13.6300/G-13.7300

– handlingoftheremainingcredit

– salescounter

5. TV totalizer G-13.6400/G-13.7400

– forvideogames/pinballmachines

– serialpulseoutput

– discountspossible

G-13.6Generalinformation

NationalRejectors,Inc.GmbH,Buxtehude

G-13.6Characteristicfeaturesofthesystem

2 Characteristic features of the system

Measuring system

Thefeaturesoftheinsertedcoins arerecognizedbysixmeasuring

probesthatareinstalledinsuccessiveorder.Amongothersthe

measuringparametersarethediameter,thethickness,thealloyand

forcertaincoinsalsotheembossingfeatures.

Theobtainesmeasurementvaluesarecompareswiththeacceptance

bandsstoredwithinthe12channels.Iftheycorrespondcompletely

withachannelthevalidatorvaluestheinsertedcoincorrespondingto

theprogrammeddenominationoroutputinformationrespectively,

unlessthechannelisinhibitedbytheappropriateDILswitchorthe

appropriateinputline.

Aftersuccessfulmeasurementalightbarrierintheareaofthe

acceptancegatecheckswhethertheinsertedcoinsfallunhindered

intothecashchannel.Withinvalidatorscontainingasortingthe

'acceptedcoinsensor'iscompletedbya'sortingcontrol'.Onlyafter

passing this additional sensor is the appropriate coin signal given.

Thusthewholeacceptanceareaincludingthefallingdirectionis

supervised,thuspreventingmanipulations.

Adjustment of the channels

12channelsareprovidedinthecoinvalidatorstoprogrammeall

requiredtypesofcoins.Apartfromthenormalbandwidthformany

types of coins a narrow bandwidthcan be adjusted. Fortypes of

coins that are likely to be forged a super narrow channel can be

adjustedtoprovidethegreatest possible protectionagainstmisuse.

Severalchannelscanhavethesamecoinvalue.Thecorresponding

settingsaregivenonthelabel(upperrow:channels1–6,lowerrow:

channels 7–12).

NationalRejectors,Inc.GmbH,Buxtehude

G-13.6Characteristicfeaturesofthesystem

Single blocking

Twoblockswith six DILswitches each areinstalledon the backside

ofthecoinvalidator.Theycan be usedtoblockindividualcoin

cannels.Todothisthecorrespondingswitchmustbesetto the upper

position. (If more than one channel is assigned to one type of coin,

e.g. for old and new coins or for different bandwidths all the switches

must be set to the upper position.)

Sixoutput linesare assignedto the12 coinchannels (notvalid for

totalizers).Ifaninsertedcoinisrecognizedthecorrespondingchannel

receivesasignal.Ifonetypeofcoinisblockedexternallythe

correspondingoutputlineisset to ground potential.Line6canbe

used to block the whole acceptance (all types of coins).

Sorting outlets

A JST plug is installed on the pc-board. Hoppers or sorting gates can

becontrolledby means ofthis plug. Signalscanalso be received

sincethese are bidirectional lines . If e.g.a hoppersends a "Full"

signalthecoinsaredirectedintothecash-box.

ThevalidatorscanalsobeadjustedbyNRIinthatwaythatthereturn

line sendsasortingsignalontothe10-poleconnectingcable.

String recognition

Asaprotectionagainstmanipulationwithstringsthecoinvalidators

are equipped with a directional accept sensor. That means that a

coinsignalis only givenwhena coin passesthelight barrier coming

fromthe coininsert. Topull coinsback outof thedevice isalso made

moredifficultbyadditionaldesignmeasures.

For devices without a front plate the accept sensor is located on the

left side whereas it is located on the right side for devices with a

frontplate.

Apartfromthatstandardcoinvalidatorsof the series G-13.6000 can

beequipped with a spring foradditional supportof this safety device.

NationalRejectors,Inc.GmbH,Buxtehude

Teach Mode

Byusingtheteachmodeyoucanprogrammecoinsortokenin

channel10and11.InallversionsoftheG-13.validatortheteach

modeisprogrammable. However, acombinationofthe 2-price-

totalizerwithsalescounterandtheteachmodedoesnotmakesense

asthetasksoftheswitchforsinglecoininhibitforthe12thchannel

wouldoverlapeachother.

Usingtheteachmode:

Thevalidatorremainsconnectedinthevendingmachine.

•OntherearofthevalidatortwoDual-In-Lineswitchesare

positioned.Switchno.12ON.

•Dependingontheintentiontoteachchannel10or11,please

switchONtheappropriateswitch.

•Insertcoinsortoken.

Afterinsertionofthe10thcoin(token)thevalidatorgivesan

acousticsignal(clickoftheacceptancegate).Themeasured

valuesarenowregistered.

•Turnswitchno.12OFF.

•Alsoturnappropriateswitchforchannel10or11OFF.

Onceagain the acceptance gate gives an acousticsignal (1time),

i.e.theprogramminghasbeenfinishedsuccessfully.

G-13.6Characteristicfeaturesofthesystem

12345 6 7 8 9 10 11 12 13 14

OFF

NationalRejectors,Inc.GmbH,Buxtehude

G-13.6Characteristicfeaturesofthesystem

Incasetheacceptance rate foracoin or token programmedbyteach

modeisnotsufficient,you canprogrammethecoinortokenwithwider

acceptancebandwidths.Thereforepleasedothefollowing:

•DIL-switchno.12ON.Teachmodeisnowactive.

•Turnswitchfordesiredchannel10or11ON.

•Insertnewcoinortokenatleast10times.

Theacceptancegategivesan acoustic signal(1time).Coinvalues

are registered.

•Turnchannelno.10and11ON.

Wideacceptancebandwidthsarenowcalculated.

•Turnswitchno.12OFF.

•Turnswitch10and11OFF.

Coinor tokenis nowprogrammed. The teach mode has now be

finishedandthechannel10 and11areenabled.

Incasetheacceptancegatesgivesanacousticsignaltwice,the

followingreasonscouldbepossible:

•coincouldnotbeprogrammed.Itexistanoverlappingofthe

acceptance limitswithalreadyprogrammedcoins/token.

•anerrorhashappendduringmeasurement.

•theprogramminghasbeeninterrupted.

•theacceptancelimitscouldnot be assigned toachannelasswitch

no.10or 11 wasturnedONfirst instead ofswitchno. 12.

Ifacoinortokencouldnotbeprogrammedtheexistingvaluesremain

storedinanycase.

NationalRejectors,Inc.GmbH,Buxtehude

G-13.6Characteristicfeaturesofthesystem

Block switch-over

Startingwithmodelno.G-13/1thevalidatoroffersthepossibilityto

havetwoconfigurations,independentfromeachother.Toeachof

these'blocks'12individualcoinchannelsareassignedwith

appropriatetables(signals,denominations,sortinginformation).The

programmingisdoneeitheratNRIorataservicestation.Although

bothblocksareprogrammedyoucanonlyworkwithoneofthem.

Thistypeofvalidatorcanberecognizedbythelabelwiththeextended

indications.

Thisfunctionisidealforstoringadditionallytotheactualcurrencyase-

condcoincombinationwithindividualinterfaceinformation(table).For

exampleincaseofacurrencyconversiontheactualsettingsare

deactivatedandthenewonesareactivated.Afurtherapplicationcan

beifindependentfromcurrencyanalternativevendingmachine

interfaceisselected.

Forstandarddevicestheswitch-overisdonebyonlyoneDILswitch!

OntherearoftheG-13twoswitcharrangementsarepositioned.For

switchingoverfromblock 0 to block 1pleaseuseswitch no. 8ofthe

right-handswitcharrangement.Pleaseproceedasfollows:

•Switchoffpowersupply.

•Switchonswitchno.8oftheright-handswitcharrangement

– lowerposition= block 0activeonly (leftsideon label)

– upperposition = block 1 activeonly (rightside on label)

•Switchonpowersupply.

•Checkcoin acceptance (pleaserefer to label).

OFF

blockswitch-over

1 2 3 4 5 6 7 8

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NRI Banknotenprüfer Handbücher

NRI

NRI v2 eagle Bedienungsanleitung

Beliebte Banknotenprüfer Handbücher anderer Marken

Alberici

Alberici BILLYONE UN1 Bedienungsanleitung

Kolibri

Kolibri Bishop Bedienungsanleitung

Royal Sovereign

Royal Sovereign RCD-2000 Bedienungsanleitung

Innovative Technology

Innovative Technology BV100 Bedienungsanleitung

Innovative Technology

Innovative Technology NV4 Bedienungsanleitung

Inves

Inves Secureuro Plus Bedienungsanleitung

Innovative

Innovative NV200 Bedienungsanleitung

ICT

ICT Bill Validator S7 Series Bedienungsanleitung

Kolibri

Kolibri Domino Bedienungsanleitung

CUMMINS ALLISON

CUMMINS ALLISON JetScan Bedienungsanleitung

Hamilton

Hamilton XE Kurzanleitung

CashCode

CashCode AMZ-154 Bedienungsanleitung

Innovate Technology

Innovate Technology NV10 Bedienungsanleitung

JCM

JCM iVIZION Handbuch

Innovative Technology

Innovative Technology NV10 Family Bedienungsanleitung

Amrotec

Amrotec MIB-11F Bedienungsanleitung

Crane

Crane NRI G-13.mft Standard Bedienungsanleitung

CASH TECHNOLOGY

CASH TECHNOLOGY CCE 20 Bedienungsanleitung