NRS Healthcare Seahorse Produkthandbuch

TOILET AND

SHOWER CHAIR

OPERATING AND

ASSEMBLY

INSTRUCTIONS

SEAHORSE

sanichair

Sanichair Manual A4:Sanichair Manual 26/6/08 08:41 Page 1

75220_12pp-Leaflet.indd 1 15/05/2012 12:17

1 PACK CONTENTS Page 2

2 INTRODUCTION Page 3

3 ADJUSTING THE SEAT HEIGHT Page 3

4 ASSEMBLING AND ADJUSTING THE FOOTREST Page 4

5 FITTING THE POTTY Page 4

6 FITTING THE POMMEL page 5

7 FITTING THE LINER Page 5

8 FITTING THE SEAT HARNESS Page 5

9 ADJUSTING THE SEAT ANGLE page 6

10 ASSEMBLING THE HEADREST Page 7

11 CLEANING AND MAINTENANCE Page 8

12 SAFETY PRECAUTIONS Page 8

13 SAFETY STANDARDS Page 8

14 PARTS LIST AND SEAT ASSEMBLY Page 9-10

TOILET AND

SHOWER CHAIR

SEAHORSE

sanichair

CONTENTS

Sanichair Manual A4:Sanichair Manual 26/6/08 08:42 Page 2

75220_12pp-Leaflet.indd 2 15/05/2012 12:17

1 PACK CONTENTS

If you have purchased the optional headrest

your pack should contain the following

components:

LHeadrest assembly

MHeadrest hand wheel

NT - nut

OWasher

Your Seahorse pack should contain the following

parts:

MAIN COMPONENTS

ASeat assembly

BFrame

CPommel

DPotty

EFoot rest

F4 point harness

SMALL COMPONENTS

GLocking handwheels

HFootrest handwheel

IFoot and ankle strap

JT-nut

KWasher

X2 X1

X1 X1 X4

H I

Sanichair Manual A4:Sanichair Manual 26/6/08 08:42 Page 3

75220_12pp-Leaflet.indd 3 15/05/2012 12:17

2 INTRODUCTION

The Seahorse range consists of two separate seat and frame sizes. Within each size option it is possible to specify two

sizes of soft liner, allowing you to tailor the product to your child’s needs. As your child grows, the liner can be

changed to increase the size of the seat without the need to re-invest in a completely new toileting and showering

chair.

•

The Seahorse range is intended for children from the age of 4 to16.

•

The maximum recommended body weight is 102 kg (16 st).

•

The seahorse is suitable for use in temperatures from 0 Celcius to 600Celcius.

•

Please carefully follow these instructions to operate you Seahorse.

3 ADJUSTING THE

SEAT HEIGHT

This operation gives you the opportunity to lock the

seat at different heights. The product has not been

designed for continual height adjustment.

For normal use we recommend the seat is set on the

second hole from the top of the tube.

It is recommended that this operation is

carried out by at least two people.

•

Place the frame Bon an even level surface

and apply the brakes on the front castors.

•

Support the seat and unscrew the locking hand

wheels G

•

Decide on the appropriate adjustment height

using the scale on the leg side as a guide.

•

Support the seat in the desired position ensuring

that the locking holes align between the frame

and adjustment legs.

•

Firmly screw the locking hand wheels G into

the frame to clamp the adjustment legs in

position.

Height

Scale

SAFETY NOTE:

Ensure the seat is level.

Ensure that the locking handwheels are

located through a hole in the adjustment

leg.

Sanichair Manual A4:Sanichair Manual 26/6/08 08:42 Page 4

75220_12pp-Leaflet.indd 4 15/05/2012 12:17

4 ASSEMBLING AND ADJUSTING

THE FOOTREST

•

Place a washer K onto the footrest threaded hand wheel H and put the hand wheel screw through the open

hole on the front of the footrest.

•

Wind a T nut J onto the screw (ensure that it is in the correct orientation).

•

Guide the T-nut into the footrest tube.

•

Align the lozenge on the rear of the footrest at the desired height with a slotted feature on the footrest tube.

Tighten the hand wheel to lock the footrest in position.

•

Pass four-foot straps I through the holes provided in the footrest and retain with the buckle clamps.

•

To adjust the footrest, support the footrest, loosen the hand wheel and adjust for height.

SAFETY NOTE:

The footrest should never be used as an

aid for mounting or dismounting the

chair.

The footrest should never be positioned

so that the footrest hangs below the

footrest tube.

Always ensure the lozenge on the rear of

the footrest is located into a

slot on the footrest tube.

5 FITTING THE POTTY

•

Align the potty D in the grooves on the seat

underside and slide the potty into place. The

locking mechanism should automatically lock in

position.

•

To remove the potty, hold the potty handle, lift

the latch and slide the potty out from the seat.

Sanichair Manual A4:Sanichair Manual 26/6/08 08:42 Page 5

75220_12pp-Leaflet.indd 5 15/05/2012 12:17

6 FITTING THE POMMEL

7 FITTING THE LINER

•

Lower the liner into the seat

•

Ensure the flanges on the liner are located into

the seat aperture.

8 FITTING THE SEAT

HARNESS

•

Position the harness F in the correct orientation

in relation to the seat.

•

Post the straps through the holes in the liner and

seat. (Two height options are provided on the

shoulder straps).

SAFETY NOTE:

Firmly pull the straps back through the

holes to ensure the buckles locate

securely in the indentations on the back

of the seat.

•

The harness straps can be altered to fit the child

by using the adjustment buckles indicated on the

diagram.

•

Hook the rear flange at the back of the pommel

C onto the front of the seat aperture.

•

Hinge the pommel downwards so that the front

flange of the pommel clips over the ridged detail

on the front of the seat.

•

To remove the pommel reverse this process,

ensuring that you unclip the front flange of the

pommel before attempting to unhook the rear

flange from the seat.

Adjustment

Buckles

Sanichair Manual A4:Sanichair Manual 26/6/08 08:42 Page 6

75220_12pp-Leaflet.indd 6 15/05/2012 12:17

9 ADJUSTING THE SEAT ANGLE

The Seahorse has been designed to provide angular adjustment of the seat allowing the Carer to orientate the child

in a convenient position for showering and toileting.

UNLOCKING THE SEAT

•

A locking hand wheel is located on the right

adjustment leg of the Seahorse. This is a secondary

safety device that prevents unwanted angling of

the seat.

SAFETY NOTE:

At all times when the seat is in a fixed

position the locking hand wheel should

be firmly tightened so that it locates in

the indexing holes on the side of the seat.

Always check the child’s hands are clear

of the pivoting mechanism prior to

adjusting the seat angle.

•

Prior to adjusting the seat angle, the locking

hand wheel should be loosened.

•

Once the locking hand wheel is loosened, use

one hand to firmly support the seat.

•

Place the other hand on the indexing plunger

and pull against the spring.

•

The seat is now free to rotate to any of the

designated angles.

•

To lock the seat, release the plunger and allow it

to spring into the required locating hole.

•

Once adjustment is complete re-tighten the

locking hand wheel prior to using the device.

Locking

Handwheel

Indexing

Plunger

Sanichair Manual A4:Sanichair Manual 26/6/08 08:42 Page 7

75220_12pp-Leaflet.indd 7 15/05/2012 12:17

10ASSEMBLING THE HEADREST

If you have purchased the optional headrest this can be assembled to the seat in the following manner:

•

Place a washer O onto threaded hand wheel

•

Position a T nut N behind the adjustment plate

on the back of the seat

(ensure that it is in the correct orientation).

•

Fit the hand wheel screw through the plate and

loosely wind onto the T-nut.

•

Place the headrest height adjustment tube into

the slot on the back of the chair and guide the

tube so that the T-nut locates into the tube slot.

•

Tighten the hand wheel to lock the tube in the

desired position.

The headrest has been designed to adjust

in three orientations.

Loosening the rear hand wheel allows

height adjustment.

Loosening the top hand wheel allows the

headrest to be moved forwards,

backwards and index to the left and right.

Sanichair Manual A4:Sanichair Manual 26/6/08 08:42 Page 8

75220_12pp-Leaflet.indd 8 15/05/2012 12:17

11 CLEANING

AND MAINTENANCE

The Seahorse frame and plastic components can be

cleaned using a domestic detergent. Avoid the use

of abrasive cleaners and cloths, which will mark the

paintwork.

The seat liners and headrest should be cleaned with

a mild soap solution. Avoid the use of products

containing chlorine, acetone, or benzene, which

will degrade the components.

The 4-point harness and foot straps can be machine

washed at 900Celsius with a domestic washing powder.

The Seahorse has been designed using materials

which are corrosive resistant and where required self

lubricating.

Keeping the product clean, particularly where parts

are moving, should be sufficient to keep your a

Seahorse in good working order.

12 SAFETY PRECAUTIONS

1Ensure all instructions have been read and understood prior to assembly and use of the product and are kept in

a safe place for future reference.

2Once the Seahorse has been pivoted to the desired angle ensure that the locking hand wheel on the side of the

seat is firmly tightened before use.

3Always check that the user’s hands are clear of the pivoting mechanism prior to adjusting the seat angle.

4Ensure that the footrest is never used as an aid to mount or dismount from the chair.

5Always securely fasten the child into the chair using the harness provided.

6It is recommended that a child should never be left unattended while using the Seahorse.

7Under no circumstances exceed the safe working limit of 102 kgs.

8Always apply the brakes once the chair is in the desired position.

9Inspect your Seahorse on a regular basis (3 monthly intervals).

Pay particular attention to the harness straps and pivoting mechanism.

If you are in any doubt concerning the condition of the product, contact NRS customer services.

13 SAFETY STANDARDS

AND EU DIRECTIVES

The Seahorse complies with the following

standards and EC directives :

• Medical Devices Directive

(C93 / 42 / EEC)

• Packaging and Packaging Waste Directive

(94 / 62 / EC)

• BS 47 51 parts 7 and 8

Sanichair Manual A4:Sanichair Manual 26/6/08 08:42 Page 9

75220_12pp-Leaflet.indd 9 15/05/2012 12:17

14 PARTS LIST

FRAMEWORK

Part No Description

1 Large frame

2 Small frame

3 Height adjustment tube RHS

4 Height adjustment tube LHS

5 Headrest vertical tube

6 Headrest horizontal tube

7 Footrest height adjustment tube large seat

8 Footrest height adjustment tube small seat

MOULDED COMPONENTS

Part No Description

9 Large seat

10 Small seat

11 Potty

12 Large pommel

13 Small pommel

14 Large footrest

15 Small footrest

16 Liner large seat thick

17 Liner large seat thin

18 Liner small seat thick

19 Liner small seat thin

20 Generic headrest

The exploded drawing illustrates all the components that constitute a Sanichair Seahorse.

For ordering parts please identify the part number that you require and contact your supplier.

FOOT REST

ASSEMBLY

HEAD REST

ASSEMBLY

COMPONENTS

Part No Description

22 Large harness

23 Small harness

24 Angle adjustment plate RHS

25 Angle adjustment plate LHS

26 M16 nylon washer

27 M6 screw

28 Nylon bush

29 M16 nyloc nut

30 Nut cap

31 Small end plug

32 Large end plug

33 D shaped end plug

34 Braked castor

35 Castor

36 Locking hand wheel

37 Indexing plunger

38 Headrest horizontal hand wheel

39 Headrest vertical hand wheel

40 Footrest hand wheel

41 M8 washer

42 M6 washer

43 Headrest pressed plate

44 T nut

45 Large foot straps

46 Small foot straps

47 Potty clip

48 Grommet

49 Self-tapping screws.

50 Indexed boss

51 Compression spring

52 Tension spring

53 Self tapping screw

45 46

44 43 27

7 8

Sanichair Manual A4:Sanichair Manual 26/6/08 08:42 Page 10

Blue Braked Castor

75220_12pp-Leaflet.indd 10 15/05/2012 12:17

Inhaltsverzeichnis

Andere NRS Healthcare Badezimmerhilfe Handbücher

NRS Healthcare

NRS Healthcare M00869 Bedienungsanleitung

NRS Healthcare

NRS Healthcare NUVO S05883 Bedienungsanleitung

NRS Healthcare

NRS Healthcare Mowbray Lite M66625 Bedienungsanleitung

NRS Healthcare

NRS Healthcare M00869 Bedienungsanleitung

NRS Healthcare

NRS Healthcare L71158 Bedienungsanleitung

NRS Healthcare

NRS Healthcare M11077 Bedienungsanleitung

NRS Healthcare

NRS Healthcare NOVELLE F25145 Bedienungsanleitung

NRS Healthcare

NRS Healthcare P23499 Bedienungsanleitung

NRS Healthcare

NRS Healthcare M11260 Bedienungsanleitung

NRS Healthcare

NRS Healthcare H85350 Bedienungsanleitung

NRS Healthcare

NRS Healthcare M00778 Bedienungsanleitung

NRS Healthcare

NRS Healthcare N05370 Bedienungsanleitung

NRS Healthcare

NRS Healthcare Mowbray Lite M66613 Bedienungsanleitung

NRS Healthcare

NRS Healthcare P05229 Handbuch

NRS Healthcare

NRS Healthcare P01560 Bedienungsanleitung

NRS Healthcare

NRS Healthcare Mowbray Lite M66613 Bedienungsanleitung

NRS Healthcare

NRS Healthcare Mowbray Lite M66625 Betriebshandbuch

NRS Healthcare

NRS Healthcare MOWBRAY LITE PLUS Bedienungsanleitung

NRS Healthcare

NRS Healthcare Nuvo L71134 Bedienungsanleitung

NRS Healthcare

NRS Healthcare M48787 Bedienungsanleitung

NRS Healthcare

NRS Healthcare M99138 Bedienungsanleitung

NRS Healthcare

NRS Healthcare MOWBRAY M11089 Bedienungsanleitung

NRS Healthcare

NRS Healthcare S09347 Bedienungsanleitung

NRS Healthcare

NRS Healthcare P05218 Bedienungsanleitung

Beliebte Badezimmerhilfe Handbücher anderer Marken

Pressalit Care

Pressalit Care R2040 Bedienungsanleitung

Invacare

Invacare 9630E Styxo Montageanleitung

Leckey

Leckey firefly splashy BIG Bedienungsanleitung

WENKO

WENKO 23285100 Bedienungsanleitung

Dietz SmartCare

Dietz SmartCare TAYO Bedienungsanleitung

Invacare

Invacare Aquatec Ocean Bedienungsanleitung

Roth

Roth Mobeli 1400222H2S Bedienungsanleitung

SEVERIN

SEVERIN LB 7220 Bedienungsanleitung

ZACK

ZACK CARVO 40510 Bedienungsanleitung

Mobilex

Mobilex Kakadu Bedienungsanleitung

CareCo

CareCo BA07059 Programmierhandbuch

lopital

lopital Elexo Technisches Handbuch

lopital

lopital Tango XL Bedienungsanleitung

rainbow care

rainbow care FS697 Bedienungsanleitung

ALCO

ALCO AL-70734 Bedienungsanleitung

lifestyle mobility aids

lifestyle mobility aids B3600F Bedienungsanleitung

Moretti

Moretti MOPEDIA RS910 Bedienungsanleitung

Invacare

Invacare Aquatec 900 Bedienungsanleitung