NTEK doortalk Bedienungsanleitung
Lite
I. TABLE OF CONTENTS
I. TABLE OF CONTENTS...........................................................
II. YOUR DOORTALK ...............................................................
III. INSTALLING DOORTALK...................................................
IV. CONFIGURING YOUR DEVICES........................................
V. REGISTERING RECEIVER/CLIENT ......................................
VI. USING DOORTALK .............................................................
VII. TROUBLESHOOTING........................................................
VIII. DOORTALK FACTORY RESET ......................................
1
Safety Precautions .......................................................................................
Specications ...............................................................................................
DoorTalk’s design .........................................................................................
2
3
4
7
12
17
17
18
18
18
Device Installation .......................................................................................
Integrating Other Devices ..........................................................................
STEP 1: Know your SIP Proxy Server .........................................................
STEP 2: Download the DoorTalk App ........................................................
STEP 3: Connect DoorTalk to a power source .........................................
STEP 4: Connect mobile device to DoorTalk Access Point (AP) .............
STEP 5: Start the Application .....................................................................
STEP 6: Find your DoorTalk Device ...........................................................
STEP 7: Network Setup ...............................................................................
STEP 8: Event Server Conguration ..........................................................
STEP 9: Call Functions Setup ......................................................................
13
13
13
13
13
14
15
16
16
STEP 1: Download The DoorTalk Application ..........................................
STEP 2: Input Registration Data ................................................................
Customizing Email Notications ...............................................................
Answering a Call ..........................................................................................
Calling your DoorTalk Device/s .................................................................
This manual contains only basic information about DoorTalk, including its
installation and conguration procedures. For more information about
other features, visit www.DoorTalk.net.
1
2
7
13
17
18
19
21
II. YOUR DOORTALK
2
Safety Precautions
Please read and follow all the instructions cited in this manual. More
information on how to use other features of DoorTalk are available
online at www.DoorTalk.net. Basic safety precautions should always
be followed for the benet of the user and to prolong usability of the
product.
DO NOT dismantle the device or tamper with the product’s
software. Only qualied technicians from authorized distributors
or the manufacturer are allowed to open it and make technical
modications if necessary. Tampering may cause malfunction
and may void warranty.
During installation, DO NOT plug the device to a power source
until the procedure has been completed. If you prefer to connect
to a power line, TURN OFF THE POWER SOURCE FIRST.
If device is to be relocated, always UNPLUG or TURN OFF the
power source rst before detaching the device from its place.
Do not submerge or soak the device into any liquid.
Avoid direct exposure to weather elements to reduce potential
risks and prolong usage.
Handle the unit with care. Do not shake, drop or strike the unit to
prevent internal damage.
Unplug the device or turn o the power source before removing
the micro SD card or USB cable.
Do not use detergent, wax, solvent, spray, benzene-based
chemicals, thinner, alcohol or excessive water to clean the
surface of the device.
DoorTalk is designed to provide security. Do not use the device
in any way that violates the right to privacy or for any other
activities that constitute a violation of human rights.
Repairs should only be referred to and done by authorized
distributors or the manufacturer.
Keep the device software and application updated. You will be
sent notications when updates are available.
1.
2.
3.
4.
5
6.
7.
8.
9.
10.
11.
3
Specications
Dimension
Material
Connectivity
Operating System
Power Input
Audio
Camera
Video
Memory
Sensors
Sensor Input
Relay Output
Operating Temperature
I/O Interface
CPU
9 x 14.7 x 2.62 cm
ABS Plastic / Weatherproof
Wi-Fi (802.11 b/g/n) or LAN (Ethernet)
Android OS
5.0V - 14V DC/2.0A
Built-in 87dB unidirectional Microphone
Built-in 2W Speaker
2MP Color (1600 x 1200 CMOS - UXGA)
60° view angle with Face Recognition
and 6 IR LED’s for night visibility
1600 x 1200 at 15FPS
Micro-SD card expandable up to 32GB
Ambient Light sensor, Motion Sensor
Active Sensors up to 5V/50mA
Contact Rating: 30VDC / 1A 125VAC / 0.5A
-20 °C to 48 °C
Micro USB
1GHz ARM Cortex A8
DoorTalk’s Design
4
1. Ambient Light Sensor
2. Infrared Illuminator
3. Mic
4. Camera
5. Call Button
6. Motion Detector
7. LED / Status Indicator
8. Speaker
1
2
5
3
6
4
7
8
5
9. USB 2 (Host)
10. Reset
11. USB 1 (Host) for Ethernet dongle
12. Sensor Input
13. Relay Output
14. Power Input (5V - 14V DC)
11 12 13
9
14
10
6
15. Micro HDMI
16. Micro SD Slot (External Storage)
15
16
7
Device Installation
STEP 1:
Plan your installation and wiring. Select a location by your door,
where visitors can easily notice and use DoorTalk. If you have a
wired mechanical door bell, you may choose to replace your door
bell button with DoorTalk. See “Integrating Other Devices, p.12” for
instructions.
Before starting the installation process, plan rst how your device will
be powered, the network connection type (wireless or LAN) and what
security systems you plan to integrate with DoorTalk. Decide whether
the wiring should go through the wall or pass underneath the device.
IMPORTANT!
READ THE INSTRUCTIONS CAREFULLY AND MAKE THE NECESSARY
PREPARATIONS FIRST BEFORE STARTING INSTALLATION OF YOUR
DOORTALK DEVICE. KEEP THE DEVICE UNPLUGGED UNTIL
INSTALLATION HAS BEEN COMPLETED.
Through Wall wire out Bottom wire out
III. INSTALLING DOORTALK
DEVICE INSTALLATION
POWER: DoorTalk comes with an AC adapter, to be plugged to a
power outlet near the door.
ETHERNET / LAN CONNECTION: DoorTalk can be connected through
Ethernet/LAN if preferred. The provided USB-Ethernet dongle serves
as an adapter to connect with a LAN (RJ45) cable. ( refer to Step 6 )
SECURITY SENSORS:
Decide which of the following security systems you plan to connect
with DoorTalk and line up their cables.
Doorbell
Electronic Door Lock System
Smoke Detector / Fire Alarm
Contact Closure Detector
NOTE: Connecting DoorTalk to any of these systems enables you to receive notications
on your mobile device if they are triggered by an event. Know more about the
corresponding mobile applications for these security systems at www.DoorTalk.net.
8
STEP 2:
Place the back cover against
the wall and mark through the
screw holes and wire outlet
(through-wall wiring) using a
pencil or marker.
Andere Handbücher für doortalk
1
Inhaltsverzeichnis
Andere NTEK Gegensprechanlage Handbücher
