Numark X5 Bedienungsanleitung

SPECIFICATIONS

MIC – AUX GAIN” (Microphone –Auxiliary Gain): This knob

adjusts the volume of both the main microphone and auxiliary

inputs.

“Treble “ (Microphone –Auxiliary High EQ):This knob adjusts

the high-tone input sound of the microphone.

“Bass” (Microphone – Auxiliary Low EQ): This knob adjusts

the low-tone input sound of the microphone.

“Gain knob” (Input Level Trim): This rotary control adjusts the

pre - fader input signal levels of the inputs.

EQ:

“Treble” (Input Level High EQ): This rotary control adjusts the

high – tone sound of the inputs.

“Middle” (Input Level Midrange EQ): This rotary control adjusts

the high-tone sound of the inputs.

“Bass” (Input Level Low EQ): This rotary control adjusts the

high – tone sound of the inputs.

“Phono(AUX)/Line Switch” (Input Selector Switch): These

three – position toggles select what input source is engaged among

the connected units and a flash position to allow rapid transforming

effect.

“Input Level Slider” (VCA Fader): These slide faders adjust the level

for CH-1 or CH-2 respectively.

“Slope knob” (Input Fader Curve Style Control): The position of this

knob determines the rate of volume level increase of the fader.

“Reverse Button” (Input Fader Reverse Control): Activation of this

switch can reveres the fader direction.

“Program/PFL Level Meter and Button”: Press to alternate display

modes.

“Cue Gain Knob”(Headphone Level): This rotary control adjusts

the levels of the headphones connected to the front panel input.

“Cue Tone Knob” (Headphone Tone Control): This rotary knob

adjusts the tone of the headphone output.

“Channel Cue Slider”: Channels 1 and 2 can be previewed using this

mini – crossfader.

“Cue Button” (MIC and MASTER Cue Buttons): When pressed,

the CUE button illuminates green indicating that the source is

being cued to the headphones.

“Crossfader Slider” (Digital VCA Crossfader): This slide fader

blends audio between CH-1 and CH-2.

SERVICE MANUAL

MODEL:X5

“Contour Knob” (Crossfader Rate/Slope Control): The position of this switch

determines how quickly or intensely the crossfader will act depending upon mode

setting.

“Direction Button” (Crossfader Reverse Control): Activation of this switch

reverses the assignment of CH-1 and CH-2 on the crossfader.

“Master Knob” (Main Output Level Control): This rotary control adjusts the main

output volume.

“Booth Knob” (Master/Split Style Headphone Cueing Switch): This rotary control

adjusts the auxiliary (AKA booth) output volume.

“Digital Output” (Optical): 48kHz, 24-bit S/PDIF output.

“Digital Output” (Coax): 48kHz, 24-bit S/PDIF output.

DISASSEMBLY PROCEDURES

1. REMOVING OF THE TOP PANELS (Fig1)

(A) REMOVE 4 CAPS.

(B) REMOVE 17 SCREWS BEFORE REMOVING OF THE TOP PANELS, INCLUDED UPPER, MIDDLE AND

LOWER PANEL.

(Fig1)

2. REMOVING OF THE BOTTOM CHASSIS (Fig2).

(A) REMOVE 12 SCREWS BEFORE REMOVING OF THE BOTTOM CHASSIS.

(Fig.2)

3. REMOVING OF THE REAR PANEL AND DISASSEMBLE THE I/O PCB

ASSEMBLY. (Fig3).

(A) REMOVE 13 SCREWS.

(B) REMOVE 2 NUTS TO DISSEMBLING THE REAR PANEL AND THE I/O PCB ASSEMBLY.

(Fig.3)

3-1.DISASSEMBLE THE I/O PCB ASSEMBLY . (Fig.3-1)

(A)(B)(C)(D)(E)(F)(G)(H)REMOVE 9 CABLES.

(Fig.3-1)

4. REMOVING OF THE FRONT PANEL (Fig4).

(A) REMOVE 1 KNOB.

(B) REMOVE 2 SCREWS BEFORE MOVING OF THE FRONT PANEL..

(Fig.4)

4-1. DISASSEMBLE THE MIC AND PHONE PCB ASSEMBLY . (Fig.4-1)

(A) REMOVE 2 NUTS AND 2 WASHERS BEFORE REMOVING OF THE MIC AND PHONE PCB ASSEMBLY.

(B) REMOVE 2 CABLES ON THE MIC AND PHONE PCB ASSEMBLY.

(Fig.4-1)

5. REMOVING OF THE MAIN PCB ASSEMBLY.

5-1. REMOVING OF THE KNOBS, FIXED HOLDERS AND GROUND PLATES.

(Fig.5-1)

(A) REMOVE 17 KNOBS.

(B) REMOVE 5 FIXED HOLDERS.

(Fig.5-1)

5-2. REMOVING OF THE NUTS, WASHERS AND VELVET CARPETS ON THE

CABINET . (Fig.5-2)

(A) REMOVE 14 NUTS AND 14 WASHERS.

(B) REMOVE 2 VELVET CARPET.

(Fig.5-2)

5-3. REMOVING OF THE VR PCB ASS’Y . (Fig.5-3)

(A) REMOVE 8 SCREWS.

(B)(C)(D)(E) REMOVE 4 CABLES BEFORE REMOVING OF THE VR PCB ASSEMBLY.

(Fig.5-3)

5-4. DISASSEMBLE THE SWITCH PCB ASSEMBLY AND REMOVING OF THE

FADERS . (Fig.5-4)

(A) REMOVE 2 KNOBS.

(B) REMOVE 4 SCREWS.

(D)REMOVE 2 CABLES ON SWITCH PCB ASSEMBLY.

(E)(F)(G)REMOVE 3 CABLES CONNECTED TO THE FADERS BEFORE REMOVING OF THE FADERS.

(Fig.5-4)

5-5. REMOVING OF THE MAIN PCB ASSEMBLY . (Fig.5-5)

(A) REMOVE 11 SCREWS BEFORE MOVING OF THE MAIN PCB ASSEMBLY.

(Fig.5-5)

WIRING DIAGRAM

EXPLODE DIAGRAM

NMS9MAR01/02/03/04/05/06/07

SEQUENCE NO OF EXPLODE DIAGRAM WILL BE MARKED ON REF. COLUMN OF BOM LIST

PACKING DIAGRAM

NMS9MAR01

Andere Handbücher für X5

Inhaltsverzeichnis

Andere Numark DJ-Equipment Handbücher

Numark

Numark STEREO iO Bedienungsanleitung

Numark

Numark NV Bedienungsanleitung

Numark

Numark D2 Director Bedienungsanleitung

Numark

Numark CM200USB Bedienungsanleitung

Numark

Numark MIXDECK EXPRESS Bedienungsanleitung

Numark

Numark MIXDECX QUARD Bedienungsanleitung

Numark

Numark Mixtrack Pro Bedienungsanleitung

Numark

Numark NS4 FX Bedienungsanleitung

Numark

Numark cdmix usb Bedienungsanleitung

Numark

Numark DJ2Go2 Bedienungsanleitung

Numark

Numark CDN450 Bedienungsanleitung

Numark

Numark BCM135 Bedienungsanleitung

Numark

Numark iDJ3 Bedienungsanleitung

Numark

Numark DDS Bedienungsanleitung

Numark

Numark AXIS 9 Service-Handbuch

Numark

Numark CDMIX3 Bedienungsanleitung

Numark

Numark PHAT TRAK Bedienungsanleitung

Numark

Numark NSFX Bedienungsanleitung

Numark

Numark NS7II Bedienungsanleitung

Numark

Numark MixTrack Pro FX Bedienungsanleitung

Numark

Numark 4TRAK Bedienungsanleitung

Numark

Numark PARTY MIX Bedienungsanleitung

Numark

Numark Mixtrack Bedienungsanleitung

Numark

Numark PARTY MIX LIVE Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung