NUTRIBULLET BALANCE Bedienungsanleitung

USER GUIDE

FOR YOUR SAFETY, CAREFULLY READ ALL INSTRUCTIONS

BEFORE OPERATING YOUR NUTRIBULLET BALANCE®.

IMPORTANT SAFEGUARDS &

CAUTIONARY INFORMATION • DO NOT USE THE NUTRIBULLET BALANCE®WITH ANY TYPE OF

ADAPTOR OR VOLTAGE CONVERTER DEVICE.

• USE OF ADAPTERS AND CONVERTERS IS CONSIDERED AN

UNAUTHORIZED MODIFICATION OF THE NUTRIBULLET

BALANCE®AND AS SUCH WILL VOID THE WARRANTY. USE

OF THE NUTRIBULLET BALANCE®IN AREAS WITH DIFFERENT

ELECTRICAL SPECIFICATIONS MAY RESULT IN DAMAGE TO IT.

• UNPLUG THE NUTRIBULLET BALANCE®WHEN IT IS NOT IN

USE. MAKE SURE THE POWER BASE IS UNPLUGGED BEFORE

ASSEMBLING, DISASSEMBLING, ADDING ADDITIONAL PARTS,

OR CLEANING.

• Do not pull, twist, or damage the power cord.

• Do not allow the power cord to hang over the side of the counter

or table.

• Do not allow the power cord to touch hot surfaces, including stove.

• Periodically inspect the power cord and plug for signs of damage.

Never operate any appliance with a damaged power cord or plug.

Electrical Safety

When using any electrical appliance, basic safety precautions

should always be observed, including the following:

• Caution! To avoid risk of electric shock, never immerse the

power cord, plug, or power base of blender in water or other

liquids.

• THE USE OF ATTACHMENTS, INCLUDING CANNING JARS,

NOT RECOMMENDED OR SOLD BY THE MANUFACTURER

MAY CAUSE FIRE, ELECTRIC SHOCK, OR INJURY AND VOID

THE WARRANTY.

If the NutriBullet Balance®malfunctions or is dropped, or damaged

in any manner, discontinue use and contact Customer Service for

further assistance.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualiﬁed persons in

order to avoid a hazard.

• Always disconnect the appliance from the supply if it is left

unattended and before assembling, disassembling or cleaning.

• Switch o the appliance and disconnect from power supply before

changing accessories or handling moving parts.

• At all times, avoid contact with moving parts.

• Keep hands and utensils away from the cutting blade while chopping

or blending food to reduce the risk of severe personal injury or

damage to the device. A scraper may be used, but only when the

blender/food chopper is not running and the NutriBullet Balance®is

unplugged.

• Appliances can be used by persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and if they

understand the hazards involved.

• NEVER LEAVE THE NUTRIBULLET BALANCE®UNATTENDED

WHILE IT IS IN USE.

• This appliance shall not be used by children. Keep the appliance

and its cord out of reach of children.

• Children shall not play with the appliance.

 TO PREVENT OVERHEATING, NEVER ALLOW THE MOTOR TO

RUN FOR MORE THAN ONE MINUTE AT A TIME, AS IT CAN

CAUSE PERMANENT DAMAGE TO THE MOTOR IF THE

MOTOR STOPS WORKING, UNPLUG THE POWER BASE AND

LET IT COOL FOR AN HOUR BEFORE ATTEMPTING TO USE

IT AGAIN YOUR NUTRIBULLET BALANCE®HAS AN INTERNAL

THERMAL BREAKER THAT SHUTS OFF THE UNIT WHEN IT

OVERHEATS THE POWER BASE WILL RESET WHEN THE UNIT

IS UNPLUGGED AND THE THERMAL BREAKER COOLS DOWN

• To reduce the risk of injury and leakage, make sure the blade

base is securely screwed onto the cup before placing it on the

Power Base and operating the NutriBullet Balance®.

• Do not use NutriBullet Balance®outdoors. Do not allow the

NutriBullet Balance®to be exposed to inclement weather

elements such as rain or other wet conditions.

 NEVER PUT YOUR HANDS OR UTENSILS NEAR THE MOVING

BLADE and never use your hands or utensils to press the activator

buttons down while the NutriBullet Balance

is plugged in.

 BLADES ARE SHARP USE CARE WHILE HANDLING THE BLADES

AND DO NOT TOUCH THE BLADE EDGES TO AVOID INJURY

 NEVER INSERT THE BLADE INTO THE POWER BASE WITHOUT

FIRST ATTACHING THE CUP

 WE RECOMMEND REPLACING YOUR EXTRACTOR

BLADE EVERY 6 MONTHS OR AS NEEDED FOR OPTIMAL

PERFORMANCE

 PERIODICALLY INSPECT ALL NUTRIBULLET BALANCE®

COMPONENTS FOR DAMAGE OR WEAR THAT MAY IMPAIR

PROPER FUNCTION DISCONTINUE USE AND REPLACE CUPS

IF YOU DETECT CRACKING, CRAZING, OR CLOUDINESS OR

DAMAGE TO THE PLASTIC OR ANY ACTUATOR

• Check gasket to make sure it is completely seated in the cross

blade before each use.

• The NutriBullet Balance®is not intended for use in microwave

ovens. Do not place the NutriBullet Balance®cups, power base

or any accessories in a microwave as this may result in damage

to its various parts.

• To reduce the risk of personal injury or damage to the device,

keep hands and utensils away from the cutting blade.

• Never blend carbonated beverages. Built-up pressure from

released gases can cause the sealed cup to burst, resulting in

possible injury.

• To prevent leakage when creating a recipe, ALWAYS make

sure that the ingredients do not extend above the MAX line.

 DO NOT PUT HOT LIQUIDS OR INGREDIENTS IN ANY

BLENDING VESSEL BEFORE BLENDING START WITH COOL OR

ROOM TEMPERATURE INGREDIENTS HEATED INGREDIENTS

CAN CREATE INTERNAL PRESSURE IN A SEALED BLENDING

VESSEL, WHICH MAY ERUPT ON OPENING AND CAUSE

THERMAL INJURY

• NEVER put hot liquids or ingredients in any blending vessel as it

can be ejected out of the appliance.

• CAUTION! Friction from the rotating blade can cause

ingredients to heat and generate internal pressure in the

sealed vessel. Do not continuously operate for more than one

minute. If the vessel is warm to touch, allow it to cool before

carefully opening it pointed away from your body.

• Extract for no longer than 1 minute. If more extraction is needed,

wait 1 minute, then repeat the extraction process in 1 minute

intervals up to three times as needed to achieve the desired

consistency. If more than three 1-minute extractions are needed,

allow the Power Base to cool for 2-3 minutes after the third

extraction before beginning the next round.

• Never permit any blended mixture to sit inside a sealed vessel

without ﬁrst releasing internal pressure.

• Do not allow blended mixtures to sit for long periods of time in

a sealed container. The sugars in the fruit and vegetables can

ferment, creating gas and causing pressure to build up and

expand in the vessel which can cause ingredients to burst and

spray out when moved or opened.

• Never use the NutriBullet Balance®to blend ingredients without

adding liquid in as doing so may damage the blade.

• The cyclonic action of your NutriBullet Balance®requires the use

of liquids to make NutriBlasts and other nutritious beverages. The

NutriBullet Balance®is not intended to be used as an ice crusher,

and not without liquids. To make a delicious cold NutriBlast, we

suggest that you use frozen fruit and chilled liquids. Alternatively,

you may add crushed ice, up to 25% of the total cup volume, with

water or other liquid ﬁlled up to the “MAX” line. Do not crush ice or

other hard items without liquid, as such prolonged use over time

may dull or damage the blades. Always inspect your blades before

each use.

• To stop the motor, twist the cup to release it from the lock mode,

and at the same time, press the cup/blade assembly down and wait

for the motor to power down completely.

• Never remove the cup and blade assembly from the power base

until the motor comes to a complete stop. Removing the cup/

blade assembly while the power base is still running may cause

damage to the blade coupling or motor gear.

• The Smart Nutrition Sensor™ includes a delicately calibrated

scale. Handle with care. If it is dropped or jarred, it may impact

the calibration causing it not to connect or detect the placement

of the cup. If this occurs, please contact customer server for

assistance.

WARNING: VENTILATION CAUTION

• Always operate the NutriBullet Balance®on a level surface,

leaving unobstructed space beneath and around the power

base to permit proper air circulation. Slots and openings on the

bottom of the NutriBullet Balance®are provided for ventilation

to ensure reliable motor operation and to prevent over-heating.

WARNING!

•To prevent ﬁre hazard, power base openings should be free of

dust or lint and never obstructed with ﬂammable materials such

as newspapers, tablecloths, napkins, dish towels, or place mats.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

WARNING!

• IF YOU ARE TAKING ANY MEDICATION, ESPECIALLY

CHOLESTEROL-LOWERING MEDICATION, BLOOD

THINNERS, BLOOD PRESSURE DRUGS, TRANQUILLIZERS, OR

ANTIDEPRESSANTS, PLEASE CHECK WITH YOUR DOCTOR

BEFORE CONSUMING ANY OF THE NUTRIBLAST RECIPES.

• THE FOLLOWING LIST OF SEEDS AND PITS CONTAIN

CHEMICALS THAT RELEASE CYANIDE INTO THE BODY WHEN

INGESTED. DO NOT USE THE FOLLOWING SEEDS AND PITS IN

THE NUTRIBULLET BALANCE®: APPLE SEEDS, APRICOT SEEDS,

CHERRY PITS, PLUM PITS, AND PEACH PITS.

Cleaning Safeguards

• RINSE BLADES (AND CUPS) IMMEDIATELY AFTER USE TO

PREVENT DEBRIS FROM DRYING AND STICKING TO VESSELS

— IF NECESSARY, USE A DISH BRUSH TO LOOSEN ANY

DEBRIS.

• HAND WASH ONLY WITH MILD DISH SOAP AND ROOM

TEMPERATURE WATER (NOT HOT).

• DRY IMMEDIATELY.

• FOR TOUGH DEBRIS, FILL THE CUP ½ FULL WITH ROOM

TEMPERATURE (NOT HOT), MILD SOAPY WATER. THEN, SIMPLY

TWIST ON THE BLADE, POP IT ON THE BASE AND GIVE IT A RUN

FOR 30-45 SECONDS. FOLLOW UP WITH A QUICK BRUSH.

• DO NOT PUT THE BLADES IN THE DISHWASHER AS ELEVATED

TEMPERATURES CAN DAMAGE GASKETS. SIMPLY HAND WASH

WITH WARM, MILD SOAPY WATER.

• THE NUTRIBULLET BALANCE®CUPS CAN BE WASHED ON THE

TOP RACK OF THE DISHWASHER USING THE NORMAL (NOT

SANITIZE) CYCLE. THE NUTRIBULLET BALANCE®CUPS AND

BLADES SHOULD NOT BE IMMERSED IN BOILING WATER FOR

ANY REASON AS THIS WILL WARP THE PLASTIC AND DAMAGE

THE GASKET.

• WHEN WASHING BLADES, DO NOT ATTEMPT TO REMOVE THE

GASKET RING. SIMPLY HAND WASH THE BLADES IN WARM,

MILD SOAPY WATER. ATTEMPTED REMOVAL OF THE GASKET

MAY PERMANENTLY DAMAGE THE BLADE CONFIGURATION

AND CAUSE LEAKAGE.

CLEANING THE NUTRIBULLET BALANCE®

Everyone hates cleaning up, which is just one more reason the

NutriBullet Balance®is such a wonderful time saver.

WARNING:

• ALWAYS UNPLUG THE NUTRIBULLET BALANCE®WHEN

CLEANING OR ASSEMBLING.

Cleaning the NutriBullet Balance®is so easy… simply place any of

the pieces (except for the Power Base, Smart Nutrition Sensor™,

and blades) on the top shelf of the dishwasher or hand wash

with warm soapy water and rinse.

WARNING:

DO NOT WASH THE BLADES IN THE DISHWASHER. THE

NUTRIBULLET BALANCE®CUPS CAN BE WASHED IN THE

DISHWASHER BUT ONLY ON THE TOP RACK USING THE

NORMAL (NOT SANITIZE) CYCLE. THE NUTRIBULLET BALANCE®

CUPS AND BLADES SHOULD NOT BE IMMERSED IN BOILING

WATER FOR ANY REASON AS THIS WILL WARP THE PLASTIC

AND DAMAGE THE GASKETS.

Stubborn Cleanup

If ingredients dry inside the NutriBullet Balance

, make your cleanup

a snap by ﬁlling the cup about 2/3 full with room temperature soapy

water and screw on the Extractor Blade. Place the cup assembly on

the NutriBullet Balance

, power base for about 20-30 seconds. This will

loosen the stuck ingredients, and with a light scrub, you’ll be all done.

14 | nutribullet.co.uk nutribullet.co.uk | 15

arrow on the Disc to the arrow in the well of the power base.

Gently press down until the disc is level.

NEVER SUBMERGE

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

For more how-to information,

visit nutribullet.co.uk

CLEANING THE NUTRIBULLET BALANCE®POWER

BASE & SCALE

For the most part the power base doesn’t really get dirty, but

if you neglect to twist the blade on to the cup tightly, liquids

can leak out and get into the base and activator buttons. If this

happens please use the following cleaning instructions.

Step 1: The most important thing is to UNPLUG the power base

before cleaning!

Step 2: Make sure the blade is not attached to the power base.

Step 3: Remove the Smart Nutrition Sensor™ from the power

base.

Step 4: Wipe the Smart Nutrition Sensor™ with a damp cloth

until clean.

Step 5: Wipe the well in the bottom of the power base with a

damp cloth until clean.

Step 6: Replace the Smart Nutrition Sensor™ by lining up the

21 Introduction

22 Let’s Get Started

24 Connecting with Bluetooth® wireless technology

25 Troubleshooting

Using with Multiple Devices, 25

Connecting and Disconnecting Manually, 26

Disconnecting the Balance Blender, 28

29 Start Making Your Recipes

38 Manual Mode

44 Cleaning the NutriBullet Balance®Smart Nutrition Sensor™ and Well

Table of

Contents

Andere Handbücher für BALANCE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NUTRIBULLET Mixer Handbücher

NUTRIBULLET

NUTRIBULLET Rx Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET SELECT 1000 Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET ultra Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET RX NB-301 Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET Blender Combo Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET NUTRIBULLET BABY Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET BALANCE Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET NUTRIBULLET BABY Technische Daten

NUTRIBULLET

NUTRIBULLET MAX Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET 1000 Series Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET 600 Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET COMBO Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET ZNBF30500ZC Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET Magic Bullet Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET NBF-50500 Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET NBI50100 Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET Rx Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET BALANCE Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET BLENDER COMBO Series Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET 1000 Series Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET Magic Bullet Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET GO Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET FRESH Bedienungsanleitung

NUTRIBULLET

NUTRIBULLET Smart Touch Blender Bedienungsanleitung

Beliebte Mixer Handbücher anderer Marken

ROTOR

ROTOR 1125.201 Bedienungsanleitung

Braun

Braun Multiquick 5 Vario series Bedienungsanleitung

ARENDO

ARENDO MIRA 305424 Bedienungsanleitung

CHEF-BUILT

CHEF-BUILT CCB-3500 Bedienungsanleitung

Viconte

Viconte VC-4406 Bedienungsanleitung

Oster

Oster BLSTAB-CB0 Bedienungsanleitung

HOFFEN

HOFFEN MC-3005 Bedienungsanleitung

Black & Decker

Black & Decker BLC18750DM Bedienungsanleitung

Sunbeam

Sunbeam 4182 Bedienungsanleitung

Bialetti

Bialetti FMX35 Bedienungsanleitung

Black & Decker

Black & Decker BL8000 Bedienungsanleitung

Duronic

Duronic BL530 Bedienungsanleitung

Exquisit

Exquisit MS 3002 wes Bedienungsanleitung

Lumme

Lumme LU-KP1891A Bedienungsanleitung

Binatone

Binatone HB-735 Bedienungsanleitung

Moulinex

Moulinex LM936E10 Bedienungsanleitung

Oster

Oster VERSA Installations- und Betriebshandbuch

Ninja

Ninja NN210Q Bedienungsanleitung