Nutrilovers GREEN PRESS CERAMIC MAX Bedienungsanleitung
GREEN PRESS CERAMIC MAX
Horizontal Slow Juicer
INSTRUCTIONS MANUAL
(English)
To fully enjoy your GREEN-PRESS CERAMIC MAX, please read the
instructions manual carefully and store it carefully.
www.nutrilovers.de
www.nutrilovers.de #WissenWasDrinIst
SAFETY INSTRUCTIONS............................................................................................................ 2
IMPORTANT INFORMATION........................................................................................ ........... 5
PARTS AND ACCESSORIES........................................................................................................ 6
INSTALLATION......................................................................................................................... 7
USE........................................................................................................................................... 9
CLOGGED DEVICE..................................................................................................................... 11
CLEANING................................................................................................................................. 12
IT'S TIME FOR HEALTHY JUICES!............................................................................................... 14
TIPS FOR JUICE PRODUCTION……………..................................................................................... 15
TROUBLESHOOTING................................................................................................................. 17
WARRANTY............................................................................................................................... 18
TECHNICAL SPECIFICATION....................................................................................................... 19
INDEX
1
www.nutrilovers.de #WissenWasDrinIst
Please follow the instructions below to avoid accidents or injuries to the user or third parties, as well as damage to property.
PREVENTION OF DAMAGE TO THE MAINS CABLE
The following actions are strictly prohibited:
●Modifying, touching or placing the mains cable in the immediate vicinity of heating elements
●Bending, twisting or pulling the power cord over sharp edges
●Putting heavy objects on the cable
●Bundling the power cable and carrying the device on the power cable
Failure to comply may result in electric shock or fire due to short circuit
DAMAGED POWER CORD
Do NOT use the device if the power cord is damaged or the plug is loose.
Damaged power cables can only be fixed by the manufacturer, its customer service or an equally qualified person.
Failure to comply may result in electric shock or fire due to short circuit
DO NOT INSERT OR REMOVE THE POWER PLUG WITH WET HANDS
The device may only be plugged in and switched on with dry hands.
Failure to comply may result in electric shock
CHECK THAT THE INFORMATION ON THE SPECIFICATION PLATE MATCHES YOUR MAINS VOLTAGE
Plugging multiple devices into the same power source can cause overheating.
Make sure that the max. load on the socket is not exceeded.
Failure to comply may result in electric shock or fire due to short circuit
FIRMLY PLUG IN THE MAINS PLUG
Make sure that the mains plug is firmly plugged into the socket.
Failure to comply may result in electric shock or fire due to short circuit
2
SAFETY INFORMATION
www.nutrilovers.de #WissenWasDrinIst
Regularly CLEAN the MAINS PLUG
Contamination can lead to inadequate insulation.
Clean the mains plug regularly with a dry cloth.
Failure to comply may result in electric shock or fire due to short circuit!
ALWAYS KEEP CHILDREN AWAY FROM THE DEVICE AND MAKE SURE THAT THEY DO NOT PLAY WITH IT
Children cannot assess the hazards caused by improper use of the device This may cause injuries!
DO NOT ALLOW TODDLERS AND CHILDREN TO PLAY WITH THE PACKAGING MATERIAL
It can lead to suffocation!
THE POWER CORD IS NOT A TOY!
Children should be kept away from the power cord!
AVOID HANGING THE POWER CORD OVER TABLE EDGES OR WORK SURFACES
This can lead to damage or injury!
DO NOTIMMERSE OR SPRAY THE APPLIANCE IN WATER
Failure to comply may result in electric shock or fire due to short circuit!
DO NOT MODIFY OR REPAIR THE DEVICE. DO NOT DISASSEMBLE THE DEVICE
Repairs can only be carried out by the manufacturer.
If necessary, contact the point of sale.
Failure to comply may result in electric shock or fire due to short circuit!
CHILDREN AND PERSONS WITH PHYSICAL, SENSORY OR MENTAL DISABILITIES MUST NOT OPERATE THIS DEVICE, WITHOUT ADEQUATE
SUPERVISION OR IN ACCORDANCE WITH THE APPROPRIATE PROFESSIONAL AND SAFETY INSTRUCTIONS
IMMEDIATELY STOP OPERATING THE DEVICE AND UNPLUG IT IF ANY ABNORMAL EVENTS OR MALFUNCTIONS OCCUR
Failure to comply may result in electric shock or fire due to short circuit!
3
www.nutrilovers.de #WissenWasDrinIst
USE THE DEVICE ONLY FOR ITS INTENDED PURPOSE
Improper use excludes any liability claim.
Failure to do so could result in injury!
USE only THE SUPPLIED Tamper TO PUSH DOWN MATERIAL IN the FILLER NECK. DO NOT USE YOUR FINGERS OR OTHER UTENSILS FOR
PUSHING!
Failure to do so could result in injury!
DO NOT OPERATE THE APPLIANCE IN THE FOLLOWING ENVIRONMENT:
•In the vicinity of heat sources or in places where there is a risk of splashing water (risk of electric shock)
•On uneven surfaces, tablecloths, carpets, etc. (risk of fire and injury)
•Near water sources or containers. (Electric shock hazard)
DO NOT LEAVE THE DEVICE UNATTENDED DURING OPERATION
Switch off the appliance if you leave it unattended.
DO NOT INSERT ANY OBJECTS INTO THE DEVICE
Especially no metallic parts such as screwdrivers, needles, wires, etc.
DO NOT REMOVE THE EXTRACTOR ATTACHMENT OR THE LID OF THE DEVICE WHILE USING IT
This may cause injuries!
DO NOT HOLD THE DEVICE BY THE POWER CORD
Failure to comply may result in electric shock or fire due to short circuit!
DO NOT OPERATE THE DEVICE CONTINUOUSLY FOR MORE THAN 20 MINUTES. ALLOW THE APPLIANCE TO COOL DOWN FOR 5 MINUTES
AFTERWARDS
Failure to comply to safety instructions may result in burns.
USE ONLY ON A CLEAN, FLAT, DRY, FIRM AND HEAT-RESISTANT WORK SURFACE
Disregard may result in injury.
4
www.nutrilovers.de #WissenWasDrinIst
DISCONNECT THE UNIT FROM THE POWER SOURCE ONLY BY THE MAINS PLUG, NEVER BY THE MAINS CABLE.
Failure to comply may result in electric shock or fire due to short circuit!
ALWAYS UNPLUG THE DEVICE FROM THE SOCKET FOR CLEANING, DISASSEMBLY OR JUST AFTER USE.
Failure to comply may result in electric shock or fire due to short circuit!
TRANSPORT THE Motor base ONLY AFTER DISCONNECTING THE MAINS PLUG. NEVER TRANSPORT THE DEVICE BY THE JUICER
ACCESSORY OR BY THE LID.
Disregard may result in injury.
DO NOT ALLOW NECKLACES, SCARVES, THREADS OR OTHER HANGING PARTS TO GET CAUGHT IN THE FILLER PIPE
IMPORTANT INFORMATION
5
●There is a risk of injury due to retraction.
●In order to avoid damage, do not drop the device.
●Do not microwave the juice container and the Pulpcontainer.
●Do not use this device outdoors.
●Do not wrap the power cord around the engine house unit.
●Do not use the device at idle for more than 30 seconds after it is switched on. (This can damage the screw press.)
oIntroduce the ingredients to be pressed immediately after switching on the appliance.
●Keep the Pulpejector and juice outlet free while the appliance is in operation.
●Make sure that accessories are secure.
●Clean the appliance after each use.
www.nutrilovers.de #WissenWasDrinIst
PARTS AND ACCESSORIES
A. Juice and pulp containers
B. Pulp spout
C. Sieve
D. Ceramic auger
E. feed chute chamber
G. Tamper
H. START / STOP / REVERSE
I. Motor base
K. Cleaning brush
L. Drip protection
6
General map: Tamper
I. Motor base
E. feed chute
chamber D. Ceramic auger
B. Pulp spout
C. Sieve
L. Drip protection
A. Juice and Pulp containers K. Cleaning brush
www.nutrilovers.de #WissenWasDrinIst
NOTE: The CERAMIC AUGER MAY BREAK if not handled properly!
ASSEMBLY
7
1. Place the Motor base on a
flat, clean and firm work
surface. Turn the E. feed
chute chamber to the left in
the appropriate holder on
the Motor base until it clicks
into place.
2. Now place the D. ceramic auger in its
holder in the Motor base by inserting it
through the E. feed chute chamber.
2. Now place the C. sieve on the D.auger
Make sure that the holes of the sieve are
at the bottom of the juice outlet.
4. Now plug the B. Pulp spout onto the E. feed chute chamber
and lock it in place.
www.nutrilovers.de #WissenWasDrinIst
8
ASSEMBLY
5. Place the A. juice and Pulp container
under the juice and Pulp spout. Open
the L. drip guard so that the juice can
drain off.
IMPORTANT:
In order to protect the motor and ensure the longevity of the device, the Slow Juicer has an automatic shutdown. If the parts are not
assembled correctly or the motor overheats due to an above-average long juicing process or a clogged sieve, the appliance switches off
automatically. This process is normal and serves to avoid damage to the device.
In this case, switch off the appliance and disconnect it from the power supply. Then check whether all parts are in the correct position and
whether there is a blockage of the Pulp spout or at the press screw. Fibrous vegetables such as celery, cabbage, etc. must be cut into pieces
before use in order to avoid blockages in the juice outlet and at the extrusion screw.
Do not operate the device idle for an extended
period of time. Start the juicing process immediately after commissioning.
www.nutrilovers.de #WissenWasDrinIst
CAUTION!
•Do not use with wet hands. Danger of electric shock!
•Do not run the appliance before you start juicing.
•Do not use the appliance continuously for more than 20 minutes.
1. Insert the mains plug into the power socket.
(Note that the mains voltage corresponds to the label applied to the
device.
Only operate the mains plug with dry hands!)
2. Place one of the two containers under the juice outlet, the other under the
Pulp spout.
3. The Slow Juicer has a START / STOP /reverse switch with the following 3
options:
USE
9
4. The Slow Juicer is suitable for processing a wide variety of foods.
Useful tips for optimal preparation:
•Always wash the material well before pressing
•For an optimal pressing, please ensure that the goods are prepared in small portions (2-3 cm)
•Each piece (2-3 cm) should easily fall into the filler pipe, so to avoid pushing it back with the Tamper
•Remove seeds from the goods before pressing. These include the kernels of the stone fruits (plums, peaches, etc.), the hard grape seeds
and the peel of pineapple, pomegranate, etc. The peel of the oranges releases bitter substances.
•Press the START BUTTON. Gradually drop the prepared portions into the filler pipe so that the slow juicer has enough time to press.
START
- Turn on the device and you
can start juicing.
STOP
- Switch off the device again.
REVERSE
- PRESSING THE BUTTON
activates the reverse for a short
moment. For further loosening of the
material to be pressed, it is
recommended to press the button
more often in succession.
Inhaltsverzeichnis
