Nvidia TESLA C2075 Bedienungsanleitung

TESLA™C

COMPUTING PROCESSOR

INSTALLATION GUIDE

NVIDIA Tesla C2075

TESLA C2075 INSTALLATION GUIDE



TABLE OF CONTENTS

Introduction 1

About This Guide 1

Minimum System Requirements 2

Unpacking 3

Equipment 3

Hardware Installation 5

Tesla C2075 Installation 5

Driver Installation 8

Windows Installation 8

Verifying Windows Installation 14

Linux Installation 15

Verifying Linux Installation 18

References and Resources 19

Getting Driver Updates 19

Registration, Support and Warranty 20

Registering Your Tesla C2075 Computing Board 20

Warranty and Support 20

Compliance and Certiﬁcations 21





INTRODUCTION

With many mainstream applications now taking

advantage of the GPU computing found in the

NVIDIA®Tesla™C2075, leading-edge customers

are producing breakthroughs in their industries

by achieving better results in a shorter period

of time. Adding the NVIDIA Tesla C2075 to an

industry-standard workstation and conﬁguring

it with an NVIDIA Quadro Professional Graphics

Solution enables performance scaling across a

wide range of professional applications.

About This Guide

This installation guide discusses the installation and conﬁguration of

the Tesla C2075 Computing Processor.



INTRODUCTION

 Minimum System Requirements

Prior to unpacking your new Tesla C2075, conﬁrm that your system

meets all the system requirements for a smooth installation.

>Operating System

zzMicrosoft Windows XP, Vista, Windows 7 (32-bit or 64-bit)

zzLinux 32-bit and 64-bit on:

zzRedhat Enterprise Linux 3.x, 4.x, 5.x

zzSUSE Linux Enterprise Desktop 11 and 10

zzOpenSUSE 11.1, 11.0, 10.3, 10.2, 10.1

zzFedora 10, 9, 8, 7

zzUbuntu 9.04, 8.10, 8.04, 7.10, 7.04

>Processor

zzIntel Pentium 4 or Xeon processor or higher

zzAMD Athlon processor or higher

>RAM

zz6 GB recommended per Tesla C2075

>PCI Express Slot

zzPCI Express x16 slot, Gen2 recommended but not required

>Power Consumption

zz215 W maximum power consumption

zzPower supply must have either a single 8-pin connector or

two 6-pin power connectors. (It is ok to connect both an 8-pin

and a 6-pin connector to the board, but not required)





UNPACKING

Be sure to inspect each piece of equipment.

If anything is missing or damaged, contact

your supplier.

Equipment

The following equipment is included in the Tesla C2075 box.

Installation CD

Contains this ﬁle (installation guide), Linux drivers,

and links to additional information on the Tesla C-series

product. To keep your drivers current, visit

www.nvidia.com/drivers to download the latest drivers.

Quick Start Guide

Contains basic hardware and software installation

instructions. Read carefully, and refer to the

Installation Guide on the CD for full installation

instructions and troubleshooting.

WELCOME

Registration Card

phone support. Take time to follow the instructions on

this card to register your product to take advantage of

customer support and warranty.



UNPACKING

Tesla C2075 GPU Computing Processor

Installs into the PCI Express x16 slot in your computer.

DVI

connector

SLI

and Framelock

connectors

disabled

Power connectors

Tesla C2075 Computing Processor







HARDWARE INSTALLATIONS

Installing the Tesla C2075 hardware involves

opening up your computer.

Note: All hardware must be installed prior to installation of

the drivers.

Tesla C2075 Installation

A computer system with an available PCI Express ×16 slot is required

for the Tesla C2075. For the best system bandwidth between the host

processor and the Tesla C2075, it is recommended (but not required)

that the Tesla C2075 be installed in a PCI Express ×16 Gen2 slot.

Because there are so many different computer systems on the

market, the installation procedure for the Tesla C2075 can vary

from system to system. Use the following instructions as a guideline

and consult the system documentation for clariﬁcation of computer

speciﬁc procedures.

Note: It is important that all power to the computer be

removed (unplugged) before you install the computing board.

You must also discharge your body’s static electricity before

handling sensitive components. Simply touch a grounded

surface before beginning.

Note: To simplify reconnections, label cables as they are

disconnected.



HARDWARE INSTALLATIONS



1 Turn off your computer and monitor and disconnect the power cord at

the outlet or at the back of your system (depending on the system).

2 Open your computer chassis (refer to your system documentation

for details).

3 Remove the slot bracket for the two adjacent slots, if they are still

covered. The Tesla C2075 computing board is a dual-slot board and

will take up two (2) slots. Save any hardware (such as screws) to use

to anchor the Tesla C2075 computing board after it is seated properly.

4 Connect the 8-pin connector or the two 6-pin connectors from the

power supply to the 8-pin and 6-pin connectors on the board. (it is ok

to connect both an 8-pin and a 6-pin connector to the board, but not

required)

The Tesla C2075 will occupy

two slots.



HARDWARE INSTALLATIONS

5 Reinstall the computer cover and any cables that were

removed earlier.

Note: If you are using one 8-pin power connector, you must

ensure that the power supply can drive enough power

through the 8-pins to the power connector. (up to 150W

through a single 8-pin connector)

6-pin power connectors

Connect one (1) 6-pin PCI Express

power connector on the edge of the

board

8-pin power connector

Connect one (1) 8-pin OR

one (1) 6-pin PCI Express

power connector on the

edge of the board



Andere Handbücher für TESLA C2075

Inhaltsverzeichnis

Andere Nvidia Computerhardware Handbücher

Nvidia

Nvidia BlueField-2 BF2500 Bedienungsanleitung

Nvidia

Nvidia JETSON AGX XAVIER Bedienungsanleitung

Nvidia

Nvidia DGX A100 Bedienungsanleitung

Nvidia

Nvidia Tegra 250 Referenzhandbuch

Nvidia

Nvidia Computer Bedienungsanleitung

Nvidia

Nvidia DGX H100 Bedienungsanleitung

Nvidia

Nvidia PCI Express Series Bedienungsanleitung

Nvidia

Nvidia ConnectX-7 Bedienungsanleitung

Nvidia

Nvidia JETSON XAVIER NX Leitfaden

Nvidia

Nvidia Jetson TX2 NX Bedienungsanleitung

Nvidia

Nvidia AVerMedia D133 Series Bedienungsanleitung

Nvidia

Nvidia Geforce PCI-Express Series Bedienungsanleitung

Nvidia

Nvidia TESLA K40 Bedienungsanleitung

Nvidia

Nvidia Mellanox ConnectX-5 Bedienungsanleitung

Nvidia

Nvidia A800 40GB Active Bedienungsanleitung

Nvidia

Nvidia ConnectX-6 Dx MCX623432AE-ADAB Bedienungsanleitung

Nvidia

Nvidia SN2700 Bedienungsanleitung

Nvidia

Nvidia BlueField-3 Bedienungsanleitung

Nvidia

Nvidia FX4500 - Apple MAC Pro QUADRO FX 4500 Video Card... Kurzanleitung

Nvidia

Nvidia ConnectX-7 Bedienungsanleitung

Nvidia

Nvidia GEFORCE RTX 4090 Bedienungsanleitung

Nvidia

Nvidia TESLA K20 Bedienungsanleitung

Nvidia

Nvidia TESLA M2050 Bedienungsanleitung

Nvidia

Nvidia GeForce FX Series Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung