Nvidia Quadro K6000 Bedienungsanleitung

NVIDIA Quadro K6000

Graphics Card

Installation instructions for HPE

WS460c Graphics Expansion Blade

and HPE servers

Overview

This document provides instructions for installing an NVIDIA Quadro

K6000 graphics card into the HPE ProLiant WS460c Gen8 Graphics

Expansion Blade.

For software installation information, see the Microsoft Windows on

ProLiant WS460c Gen8 Workstation Blade with WS460c Graphics

Expansion Blade Administrator Guide.

Kit contents

•

NVIDIA Quadro K6000 graphics card (225W)

•

PCI expansion bracket

•

Double-wide retention bracket

•

Screws

•

This document

Additional requirements

You can add more ProLiant servers for future support. For

requirements specific to each individual server, see the individual

hardware documentation.

Replacing NVIDIA Quadro 5000

and 6000 graphics cards

IMPORTANT: This procedure is for replacing NVIDIA

Quadro 5000 and 6000 graphics cards only on the Gen8

graphics expansion blade. Earlier generations do not

support this card.

Required tools for this procedure:

•

T-10/T-15 Torx screwdriver (provided inside the server)

•

HPE Insight Diagnostics software

To remove the graphics card from the graphics expansion blade:

1. Power down the WS460c Gen8 Expansion Blade.

2. Remove the WS460c Gen8 Expansion Blade.

3. Remove the WS460c Graphics Expansion Blade access panel.

4. Remove the WS460c Graphics Expansion Blade PCIe card

cage.

5. Disconnect any power cables from the graphics card,

disconnect the retaining screws, and then remove the graphics

card from the card cage.

6. Insert the NVIDIA Quadro K6000 graphics card into the card

cage.

7. Install two screws at the I/O connector panel to secure graphics

card to the card cage.

8. Install the card cage to the WS460c Gen8 Expansion Blade.

9. Install power cables to the graphics card power connector

located at the end with cooling fan.

The information contained herein is subject to change without

notice. The

only warranties for Hewlett Packard Enterprise products and services are set

forth in the express warranty statements accompanying such products and

services. Nothing herein should be construed as constituting an additional

warranty. Hewlett Pa

ckard Enterprise shall not be liable for technical or

editorial errors or omissions contained herein.

Part Number: 734583-002

November 2015

Edition: 2

10. Install access panel and reinstall the WS460c Gen8 Expansion

Blade to the enclosure.

The installation is complete. For more removal and replacement

information, see the ProLiant WS460c Gen8 Workstation Blade with

WS460c Graphics Expansion Blade Maintenance and Service

Guide.

Installing the graphics card on the

DL/ML/SL Server

Required tools for this procedure:

•

#2 Phillips screwdriver

•

T-10/T-15 Torx screwdriver (provided on back of the server)

Before installing the card, check the hardware and specification

documentation of the server to be installed and confirm that the

NVIDIA Quadro K6000 is supported. For high-level installation

instructions, follow these steps. For more specific installation

information, see the individual server documentation.

1. Use a Phillips screwdriver to remove the standard extender

from the graphics card.

2. Install the short extender on the graphics card. Tighten screws

until snug.

CAUTION: Do not over tighten screws.

3. Power down the server.

4. Follow your server specific hardware documentation to

remove, replace, or install the NVIDIA Quadro K6000 graphics

card.

5. Power up the server.

6. Download and install the latest drivers from the Hewlett

Packard Enterprise or NVIDIA website.

The installation is complete.

Andere Nvidia Grafikkarte Handbücher

Nvidia

Nvidia 8400 - BFG GeForce GS Gebrauchsanweisung

Nvidia

Nvidia QUADRO SYNC Bedienungsanleitung

Nvidia

Nvidia RTX A6000 Bedienungsanleitung

Nvidia

Nvidia geforce4 MX420 Bedienungsanleitung

Nvidia

Nvidia Titan RTX Bedienungsanleitung

Nvidia

Nvidia MS-8808 Vanta TNT2 M64 Bedienungsanleitung

Nvidia

Nvidia Quadro FX 370 Bedienungsanleitung

Nvidia

Nvidia Quadro GV100 NVLink Bridge Bedienungsanleitung

Nvidia

Nvidia NVX-E0204D Bedienungsanleitung

Nvidia

Nvidia GeForce GTX 980 Bedienungsanleitung

Nvidia

Nvidia VCQFX4500X2 Handbuch

Nvidia

Nvidia GeForce GTX 660 TI Bedienungsanleitung

Nvidia

Nvidia Quadro GP100 Bedienungsanleitung

Nvidia

Nvidia Quadro Workstation Bedienungsanleitung

Nvidia

Nvidia Quadro FX 4700 X2 Bedienungs- und Sicherheitshinweise

Nvidia

Nvidia V6800GS-512P Bedienungsanleitung

Nvidia

Nvidia 5700 - ASUS V9570 Series GeForce FX AGP 256MB S-VId DVI VGA Video... Bedienungsanleitung

Nvidia

Nvidia GeForce GT220 Bedienungsanleitung

Nvidia

Nvidia GRID K1 Bedienungsanleitung

Nvidia

Nvidia Quadro Bedienungsanleitung

Nvidia

Nvidia Quadro 4000 Bedienungsanleitung

Nvidia

Nvidia Quadro FX 1700 Bedienungsanleitung

Nvidia

Nvidia GEFORCE GT 630 Bedienungsanleitung

Nvidia

Nvidia GeForce FX Series Bedienungsanleitung

Beliebte Grafikkarte Handbücher anderer Marken

Gainward

Gainward GeForce GTX 690 4GB Bedienungsanleitung

ATI Technologies

ATI Technologies RADEON 137-40225-20 Bedienungsanleitung

MSI

MSI N220GT series Bedienungsanleitung

ATI Technologies

ATI Technologies RADEON 7000 MAC EDITION Bedienungsanleitung

SIIG

SIIG aurora Bedienungsanleitung

ClearSpeed

ClearSpeed ClearSpeed Advance e720 Bedienungsanleitung

MSI

MSI R7850 series Bedienungsanleitung

DVS

DVS Atomix HDMI Bedienungsanleitung

Aztech

Aztech VGS3D-AGP Bedienungsanleitung

Advoli

Advoli TB4 Standard Bedienungsanleitung

ELSA

ELSA ERAZOR III LT Bedienungsanleitung

Gigabyte

Gigabyte GV-R7500L Bedienungsanleitung

Themis

Themis TGA-7000 PMC Bedienungsanleitung

EMS

EMS XtremeRGB-Ex1 Bedienungsanleitung

Pioneer

Pioneer PDA-5003 Bedienungsanleitung

QDI

QDI N2 Bedienungsanleitung

NEC

NEC N8116-48 Bedienungsanleitung

MSI

MSI R7770 PoweR Edition Bedienungsanleitung