NY Wholesale DT-IP-G24 Bedienungsanleitung

OPERATION MANUAL

Version 1.0 / 201704

4 inch Guard Station

2 WIRE IP SYSTEM

COLOR TFT TOUCH SCREEN WITH HANDSET

• Please read this manual carefully before using the product you purchase,and keep it well for future

use.

• Please note that images and sketch maps in this manual may be different from the actual product.

REC

PRECAUTIONS

• Slotsoropeningsinthebackofthemonitor,areprovidedforventilationand

toensurereliableoperationofthevideomonitororequipmentandtoprotectif

fromoverheating.Theseopeningsmustnotbeblockedorcovered.Themonitor

shouldneverbeplacednearoroveraradiatororheatregisterandshouldnotbe

placedinabuilt-ininstallationsuchasabookcase unlessproperventilationis

provided.

• Allpartsshouldbeprotectedfromviolencevibration.Andnotallowbeimpacting,

knockinganddropping.

• ForcleantheLCDscreen,usinghandsorwetclothisforbidden.

• Pleasedothecleannesswithsoftcottoncloth,pleasedonotusetheorganicor

chemicalcleanimpregnate.Ifnecessary,pleaseusepurewaterordilutesoap

watertocleanthedust.

• Imagedistortionmayoccurifthevideodoorphoneismountedtooclosetomag-

neticfielde.g.Microwaves,TV,computeretc.

• Pleasekeepawaythevideodoormonitorfromwet,hightemperature,dust,and

causticandoxidationgasinordertoavoidanyunpredictabledamage.

• DoNOTopenthedeviceinanycondition,calltheadministratorforhelpifthereis

anyproblemormulfunctionhappens.

CONTENTS

PARTS AND FUNCTIONS..................................................................................... 4

Part Names............................................................................................................. 4

Mounting................................................................................................................. 5

Screen .................................................................................................................... 6

BASIC OPERATIONS............................................................................................ 7

Answering a call ..................................................................................................... 7

Basic operation based on Namelist........................................................................ 8

Select a user or a Guard Station to be called.................................................... 8

Select a video door station to be monitored ...................................................... 9

Select a door station to be released the lock..................................................... 9

Basic operation by Input code ............................................................................... 10

Call a user or a Guard Station.......................................................................... 10

Monitor a video door station ............................................................................. 10

Release a door lock.......................................................................................... 11

Recording .............................................................................................................. 11

Viewing videos....................................................................................................... 12

Viewing calling records.......................................................................................... 13

SETUP INSTRUCTIONS....................................................................................... 14

Setting date and time............................................................................................. 14

Setting monitor time............................................................................................... 14

Setting ring tone & ring volume ............................................................................. 15

Setting IP address ................................................................................................. 15

Specication .......................................................................................................... 16

-4-

PARTS AND FUNCTIONS

Key functions

NO. Item Description

[1] Color LCD touch screen •See the menu details

•Display videos and images

[2] Handset Pick up to answer the call

[3] Monitor button Monitor the video from the selected Door Station

[4] Manual record button Press to capture videos

[5] Close button •Press to open/close the main menu page.

•End the communication,monitoring, or call.

[6] Mute button Reserve

[7] Home button Press to return to main menu page

[8] Call button Press to call the users or other Guard Stations

[9] Unlock button Press to release the door lock

[10] Transfer button Reserve

[11] Missed call button •Light up when having missed call

•Press to open the missed call records in shortcut

[12] Speaker Send out sounds of ring tones,audio and alarms

[13] Power switch Press to power off/on for the unit

[14] SD card slot Use to insert micro-SD card(SD card not included)

Part Names

REC

[1]

[13]

[14]

[2]

[3]

[4]

[5]

[6]

[12]

[8]

[7]

[10]

[11]

[9]

* Monitor/Home/Call/Manual record/Unlock button will be light up when power on for the unit.

-5-

The installation height is suggested to 145~160cm.

1. Use screws to fasten the mounting bracket to the wall with mounting box.

2. Connect the power to the unit.

3. Mount the unit to the mounting bracket, make sure the magnet on the unit is absolutely

attached to the mounting bracket.

4. Final view.

PARTS AND FUNCTIONS

Terminal description

1 2 3 4

2 wire cable

Mounting screw

x 2(included)

Mounting bracket

The unit

Mounting box

(size:86x86mm)

POWER

RS485

RELAY

CRJ45

L1,L2: Power input,no polarity.

RS485: Reserve.

RELAY: Reserve.

CRJ45: RJ45 converter terminal,

connect to Ethernet.

Mounting

-6-

PARTS AND FUNCTIONS

The Main menu is your starting point for using all the applications on your monitor.

Press [Home] button or touch anywhere of the screen on monitor in standby mode, the

Main menu will appear as follow:

On Main menu page,touch [Input Mode] icon to display the Search screen.

Main screen

SETTINGS

Touch it to enter setup page.

MONITOR

Touch it to enter

video resource page.

EVENT

Touch it to review

the calling records

and memo infos.

INPUT MODE

Touch it to show the keypad.

UNLOCK

Touch it to enter lock

resource page.

INTERCOM

Touch it to enter intercom

selections.

Current date and time.

Input box

Digital keypad

Serach screen

Return to Main menu page.

Press to switch to Search result.

Press to switch to Char keypad.

Press to delete the input.

Screen

-7-

00:10 [9002]CDS2

PARTS AND FUNCTIONS

Displays calling source.

Shows status of talking,

unlocking ect.

Displays while recording.

Displays talking time.

If the calling source is

a Video Door Station,

video will be displayed.

Communication screen

Touch it to end the talk-

ing and close the screen.

Answering a call

REC

00:10 [9002]CDS2

• Whenreceivingacall,thecalltone

sounds,videowillbe displayedonthe

screenifthesourceisaVideoDoor

Station,andonevideowillberecorded

for10secondsautomaticallyifthereis

video.

• Pickuphandsetto communicate with

thecallerfor90seconds.

• Whilecommunication,press / 

[Unlock]buttontoreleasethecorre-

spondingdoorlock.

• Whenthecommunicationends,hang

uphandsetorpress [Close]button.

1.Ifnobodyanswersthecall,thescreenwillbeturnedoffautomaticallyafter30seconds.

2.TheimagewillnotbedisplayedwhenreceivingacallfromUserorOtherGuardStation.

3.Manualrecordingisforbiddenduringautorecording.

4.Whilereceivingacall,othercallingisforbidden.

5.Communicationalsoendsautomaticallyafter90seconds.

-8-

BASIC OPERATIONS

In default, the Namelist is not included.It should be conﬁgured by speciﬁc software.The

following instructions is in the condiction of the namelist is created.

1.On Main menu, touch [Intercom]

icon to display Namelist. Touch icon

to switch between User List and Guard

Station List.

2.Select a Name by touching it,calling is

activated immediately.No image will be

displayed on screen.

Basic operation based on Namelist

1.Select a User or a Guard Station

to be called

3.If nobody answers the call within 30

seconds,it will stop calling automatically

and shut off the screen.Or touch

icon to stop calling directly.

4.If the call is answered,communication

is starting.

5.When the communication ends, hang

up handset or press [Close] button.

Scrolltonextpage.

Scrolltolastpages.

SwitchbetweenUserandGuardStationList.

ReturntoMainmenupage.

User List

Guard Station List

-9-

1.On Main menu, touch [Monitor] icon

to display Video resource list.

1.On Main menu, touch [Unlock]

icon to display Door Station list.

BASIC OPERATIONS

2.Select a Video Door Station

to be monitored

Select a door station to be

released the lock

2.Select a Video Door Station by touching

it,minitoring is activated immediately.The

monitor time is 30 seconds.

2.Select a Door Station by touching it,

then press / [Unlock] button

to release the corresponding lock.

3.If the door is open,the screen will pop-

up a box of unlocking. If unlocking is

failed,the screen will pop-up a box of

device connection error, see as follows:

3.The image of outdoor condiction will be

displayed on screen,see as follow:

4.During monitoring, these operations are

available:

-Pick up handset to talk with visitor;

-Press / [Unlock] button to release

the door lock;

-Press [Manual record] button to record

videos.

-Press [Close] button to end monitoring.

00:10 [9002]CDS2

-10-

BASIC OPERATIONS

The another way to activate the functions of calling, monitoring, unlocking is by inputting code

via the keypad on screen. There are two different types of code: Default code and Room code.

Default code: logical device address,set by DIP switch.

Room code: congured by software. In default,the room code will not listed on Guard Station.

Basic operation by Input

For example,maybe you just remember

the room code including the numbers of

32,input the code 32 on input box,then

touch the key “Search”, all Namelist in-

cluding the code of 32 will be displayed.

1.Call a User or a Guard Station

On Main menu, touch [Input Mode]

icon to display Search screen, or press

[Call] button in shortcut.

Input the Default code on input box, then

press [Call] button,calling is activated

immediately.

(a) Input the Room code on input box

if you remember the room code clearly,

then press [Call] button,calling is

activated immediately.

(b) If you don’t remember the room code

clearly, you can use the function of fuzzy

search. Searching by digital numbers or

by name is available.

The Default code is composed of 3-digits

DT-IPG IP_NODE_ID address and 3-digits

Monitor or Door Station address.

For example:

To call the 02 address Monitor inside IP

gateway address IP_NODE_ID=12, input

012002

Please note the above numbers are logical

device address, not input numbers or call

address.

1) Call by Default code:

Search by digital numbers:

2) Call by Room code:

32_

Select the target you want, then press

[Call] button to activate calling.

Inhaltsverzeichnis

Andere NY Wholesale Gegensprechanlage Handbücher

NY Wholesale

NY Wholesale DT608 Series Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung