Oce Tensioning winder 30 Bedienungsanleitung
Tensioning
Winder 30
User’s Guide
For Océ CS9050, CS9060 &
CS9160
Eco Solvent Printers
User’s Guide Tensioning winder 30 for Océ CS9050, CS9060 & CS9160 Eco-Solvent Printer
2 AP-40104 - Revision 1.1 – 12/03/2008
This page is left blank intentionally
User’s Guide Tensioning winder 30 for Océ CS9050, CS9060 & CS9160 Eco-Solvent Printer
3 AP-40104 - Revision 1.1 – 12/03/2008
COPYRIGHT NOTICE
COPYRIGHT ©2008 Océ-Technologies B.V. All rights reserved.
This document may not be reproduced by any means, in whole or in part, without written permission of the
copyright owner.
This document is furnished for the installation of the Tensioning Winder 30 on a OCÉ CS9060 & CS9160
Eco Solvent Printer.
In consideration of the furnishing of the information contained in this document, the party to whom it is given,
assumes its custody and control and agrees to the following:
The information herein contained is given in confidence, and any part thereof shall not be copied or
reproduced without written consent of Océ-Technologies B.V.
This document or the contents herein under no circumstances, shall be used in the manufacture or
reproduction of the article shown and the delivery of this document shall not constitute any right or license to
do so.
March 2008
Published: Océ-Technologies B.V.
St. Urbanusweg 43
Venlo, The Netherlands,
P.O. Box 101, NL 5900 MA Venlo.
WEEE regulations
Environmental information
Disposal of your old product
Your product is designed and manufactured with high quality materials and components, which
can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means the product is
covered by the European Directive 2002/96/EC
Please inform yourself about the local separate collection system for electrical and electronic
products.
Please act according to your local rules and do not dispose of your old products with your normal
household waste. The correct disposal of your old product will help prevent potential negative
consequences for the environment and human health.
User’s Guide Tensioning winder 30 for Océ CS9050, CS9060 & CS9160 Eco-Solvent Printer
4 AP-40104 - Revision 1.1 – 12/03/2008
This page is left blank intentionally
User’s Guide Tensioning winder 30 for Océ CS9050, CS9060 & CS9160 Eco-Solvent Printer
5 AP-40104 - Revision 1.1 – 12/03/2008
Table of contents
1Safety instructions .....................................................................................................7
2Product overview........................................................................................................9
2.1 Part names and functions......................................................................................9
2.1.1 Front side...........................................................................................................9
2.1.2 Rear side .........................................................................................................10
2.1.2.1 CS9050() ..................................................................................................10
2.1.2.2 CS9060 and CS9160 () ............................................................................10
2.2 In-the-box contents CS9050................................................................................11
2.2.1 Winder kit CS9050...........................................................................................12
2.3 In-the-box contents CS9060 and CS9160...........................................................13
2.3.1 Winder kit CS9060 and CS9160......................................................................14
3Installation procedure..............................................................................................15
3.1 Installing the front tensioning system...................................................................15
4Calibration procedure ..............................................................................................21
4.1 Tensioning bar.....................................................................................................21
4.1.1 Calibration........................................................................................................21
4.1.2 Adjustment.......................................................................................................23
4.2 Scroller bar..........................................................................................................24
4.2.1 Calibration........................................................................................................24
4.2.2 Adjustment.......................................................................................................26
5Operating the system...............................................................................................27
5.1 Switching the power ON/OFF..............................................................................27
5.2 Connecting the power cable................................................................................27
5.3 Activate the winding system................................................................................28
5.4 Locking the system..............................................................................................28
5.5 Loading roll media...............................................................................................29
User’s Guide Tensioning winder 30 for Océ CS9050, CS9060 & CS9160 Eco-Solvent Printer
6 AP-40104 - Revision 1.1 – 12/03/2008
This page is left blank intentionally
User’s Guide Tensioning winder 30 for Océ CS9050, CS9060 & CS9160 Eco-Solvent Printer
7 AP-40104 - Revision 1.1 – 12/03/2008
1 SAFETY INSTRUCTIONS
Important
BE SURE TO READ THE TERMS IN THE NEXT CHAPTER THOROUGHLY BEFORE INSTALLING AND
OPERATING THE SYSTEM FOR YOUR OWN SAFETY.
All safety related terms are bundled and categorized in three types.
Safety terms Details
Important Must be followed carefully to avoid death or serious bodily injury
Caution Must be observed to avoid bodily injury (moderate or light) or damage to your equipment
Notes Contains important information and useful tips on the operation of your printer
•Do not stand on or place heavy objects on the unit. Doing so may result in the unit tipping or falling over
and causing injury.
•Do not attempt to plug in electrical plugs with wet hands. Doing so may result in electrical shock.
•Do not use thinner, benzene, alcohol or other active agents. Doing so may result in damage or paint
peeling from the casing.
•Be careful not to spill water inside the winder. Doing so may result in a short-circuit.
•Never open the covers fixed with screws. Doing so may result in electrical shock or a malfunctioning in
the unit.
•When setting roll media, place it on top of a desk or other flat surface. Setting roll media with the scroller
standing up may damage them.
User’s Guide Tensioning winder 30 for Océ CS9050, CS9060 & CS9160 Eco-Solvent Printer
8 AP-40104 - Revision 1.1 – 12/03/2008
This page is intentionally left blank
User’s Guide Tensioning winder 30 for Océ CS9050, CS9060 & CS9160 Eco-Solvent Printer
9 AP-40104 - Revision 1.1 – 12/03/2008
2 PRODUCT OVERVIEW
2.1 PART NAMES AND FUNCTIONS
2.1.1 Front side
No Name Function
1 Operation panel Enable or disable the winding system
2 Power switch To switch ON and OFF the T Winder 30
3 Horizontal adjustment screw Adjust the side position of the scroller
4 Scroller lock lever To lock and unlock the scroller
5 Driving mechanism Winds up the printed media
6 Scroller assembly To install an empty core on which printed media is wound up
7 Tensioning bar Optimizes the tension between print platform and scroller
8 Left bracket Scroller support
9 Scroller height adjustment screw Lower or raise the scroller
10 Scroller height fixing screw Fix the height of the scroller
User’s Guide Tensioning winder 30 for Océ CS9050, CS9060 & CS9160 Eco-Solvent Printer
10 AP-40104 - Revision 1.1 – 12/03/2008
2.1.2 Rear side
2.1.2.1 CS9050(*)
No Name Function
1 Scroller Supports the movable flanges
2 Flange There is one movable and one fixed flange to position the media
correctly
3 Scroller receiver Movable flange
2.1.2.2 CS9060 and CS9160 (*)
No Name Function
1 Scroller support Movable 2-3” compatible core holders.
2 Scroller support lever To lock or unlock the scroller supports.
(*) This system is pre mounted and not included in the kit. But works as one system with the tensioning winder.
Inhaltsverzeichnis
Andere Oce Druckerzubehör Handbücher
Oce
Oce im4511 Bedienungsanleitung
Oce
Oce FS-520 Bedienungsanleitung
Oce
Oce im2330 Bedienungsanleitung
Oce
Oce Saddle Finisher-AF2 Bedienungsanleitung
Oce
Oce XDL Bedienungsanleitung
Oce
Oce im5530 Bedienungsanleitung
Oce
Oce Booklet Trimmer-D1 Bedienungsanleitung
Oce
Oce Perfect Binder-C1 Bedienungsanleitung
Oce
Oce E1 Bedienungsanleitung
Oce
Oce im5530 Bedienungsanleitung
