Octopus T-MOOV Bedienungsanleitung
1
USER MANUAL
MANUEL D’UTILISATION
2
USER MANUAL
Before using this device, please read the instructions carefully.
OCTOPUS
9, rue du Danemark – 56400 Auray
Tél :+33 (0)2 90 38 01 83
Société anonyme (SA) – capital de 2 027 467,50 € - SIRET:34172701400043
NAF-APE:4662Z – RCS Auray: B 341 727 014 - TVA:FR82341727014
Dissemination and reproduction prohibited without the agreement of the company OCTOPUS.
Ed 2021-11
Rev-0.1
3
USER MANUAL
Safety instructions
Before using this product, please read the safety instructions and follow all indicated precautions.
Keep the user manual in a safe place for later use.
DANGER/WARNING SYMBOLS USED
OTHER SYMBOLS USED
Do not clean the robot with a high-pressure cleaner
Do not climb onto the robot
Do not use a live electric fence on the floor where the robot operates.
This may cause major damage.
Cleaning and disinfecting necessary or mandatory
Indicates danger of death or serious injury
Indicates risk of injury or material damage
4
USER MANUAL
WHENEVER USING ELECTRICAL EQUIPMENT, BASIC PRECAUTIONS MUST BE TAKEN.
READ ALL INSTRUCTIONS BEFORE USING YOUR ROBOT.
Unplug the device from the outlet when not in use or before carrying out maintenance.
DANGER: To limit the risk of fire, electrocution, or injury:
GENERAL
•This device is intended for professionals. It must not be used by children or inexperienced persons, unless they have received
the necessary instructions from a responsible person for the sake of their own safety.
•The robot may only be maintained, disassembled, or repaired by a technician approved by OCTOPUS BIOSAFETY.
•Use this device only as indicated in this manual.
•Do not operate the robot or its charger if it has been damaged in any way whatsoever.
•If the robot is running abnormally, or has been struck, damaged, left outside, or immersed in water, return it to the customer
service center.
•Never handle the charger or charging robot with wet hands.
•Do not climb onto the robot.
•Do not sit on the robot.
•Do not put the robot on a surface that it could fall from (chair, table, etc.).
•Turn off the power switch when transporting the robot or when it is not in use for an extended period of time.
•This product is designed to be used indoors.
•The robot must be used at a temperature between 5° and 40°.
•The robot may be used at an altitude of up to 2000m.
ROBOT
•Use only original equipment and accessories. It is prohibited to modify the robot’s original design. If any modifications are made
outside of the normal use of the robot, OCTOPUS BIOSAFETY shall be released from all liability, and the warranty may be
canceled in full.
•Do not cover up the robot.
•Do not carry loads on the robot.
•Do not block the shock absorbers with objects.
•Never grab or carry the robot when its motors are running.
•Keep all protective parts, shields, safety units, and sensors in place.
•In any parts or damage, they must be replaced at the customer service center.
•Before lifting the robot, make sure that it is turned off, and grab it by the handle located on the rear.
BATTERY
•Do not open up or damage the power unit.
•The battery unit contains electrolytes. If electrolytes leak, do as follows:
oContact with skin: Immediately clean those areas of the skin with water and soap.
oContact with eyes: Immediately clean the eyes with water for at least 15 minutes without rubbing.
oGet medical care.
•Make sure that the batteries are charged using the manufacturer’s recommended charger. Incorrect use may cause
electrocution, overheating, or leakage of corrosive liquid from the battery.
5
USER MANUAL
BATTERY CHARGER
•Use only the charger provided with the robot.
•Unplug the charger from the outlet when not in use or before carrying out maintenance.
•Use only the charger provided by the manufacturer to recharge the device.
•Never use a damaged cord or outlet.
•Do not bend or pull on the power cord. Do not use it as a handle. Do not close a door on it. Keep it away from heated surfaces.
•Do not use an extension cord or wall outlets with an inappropriate current rating.
•Do not unplug the device by pulling on the cord. To unplug, hold the plug, not the cord.
•Do not open up the charger. Repairs must be made only by a qualified technician.
•Never exposed the charger to high temperatures, and avoid all contact with moisture.
•The charger must be removed from the power outlet before cleaning or maintaining the device or removing the battery.
6
USER MANUAL
Contents
Safety instructions ____________________________________________________________3
Contents ____________________________________________________________________6
About the robot _______________________________________________________________7
Components of the robot _______________________________________________________8
Procedure for adjusting the ground clearance of the T-MOOV robot __________________10
Recharging the robot _________________________________________________________15
Using the Control Panel _______________________________________________________17
Maintenance ________________________________________________________________20
Troubleshooting _____________________________________________________________21
Technical specifications_______________________________________________________23
Declaration of conformity______________________________________________________24
7
USER MANUAL
About the robot
Poultry robotics expert, OCTOPUS BIOSAFETY aims to automate certain painful and repetitive tasks in order to improve
the working conditions of the poultry farmer while increasing the profitability of his breeding and animal welfare.
The T-Moov robot is a poultry-farming robot for professionals.
HOW IT MOVES:
The robot moves autonomously and randomly on the floor of a coop. It is equipped with sensors to detect and move
around obstacles. A control interface is available to set its speed (6 speeds).
The robot has different ways to encourage the birds to move (visual, sound, and mechanical) in order to limit how
accustomed they get to the robot’s presence, without any harmful effects on their behavior.
Its four drive wheels allow the robot to move onto uneven bedding. Its compact shape enables it to pass under most
feeding systems found in the coop.
READY TO USE:
The robot is entirely “ready-to-use” and can begin service as soon as it is delivered. No software or hardware installation
is required in the chicken house. The robot is completely "ready to use", after selecting the speed of movement, directly
accessible from the robot's control panel.
LONG BATTERY LIFE:
The battery built into the robot allows it to operate for 10 hours without needing to be recharged.
USER-FRIENDLY:
The robot’s streamlined Interface makes it easy to use: Turn it on, press “Start”, and the robot begins working.
Smartphone app:
The robot is controlled and/or configured via its dedicated smartphone App.
Downloadable on the Play Store
8
USER MANUAL
Components of the robot
Robot and accessories
One or more flag kits, in different shapes and colors, can be added to the T-Moov.
With magnetic fasteners, these flags are extremely simple to use and easily interchangeable, while being
hard to tear off.
The T-Moov has 6 different attachment points.
No adjustment is necessary
T-Moov robot (with its charger and power cord)
Flag kit (standard or accessory):
9
USER MANUAL
Main view of robot
Eyes (light stimuli)
Shell
Drive wheels (x4)
Status light
Battery light
ON/OFF
(Power switch)
Handle
Charger outlet
Drive wheels (x4)
Flag kit mount
(x2)
Access door to control panel
10
USER MANUAL
Procedure for adjusting the ground clearance of the T-MOOV robot
The T-Moov has two ground clearance heights: A high and a low position. With the high position, the robot is better able
to travel over uneven litter, or other bumpy surfaces. The low position is preferable for passing under fixed obstacles
such as feed chains on legs.
The adjustment is done with only three tools:
-a 19mm socket wrench for the wheels
-a 30 mm torx wrench for the shell
-a 20 mm torx wrench for the hubs
1) Removing the shell and wheels
a. First, remove the four screws that hold the shell in place (a)
b. Then remove the four nuts that hold the wheels (b)
2) Adjust the height of the four hubs to the desired working height.
a. Highest ground clearance height (H)
30 mm torx tip - 4 screws
19 mm socket wrench - 4 nuts
Zoom
Inhaltsverzeichnis
Beliebte Robotik Handbücher anderer Marken
STEMCenter USA
STEMCenter USA Pi-Bot v2.00 Bedienungsanleitung
SunFounder
SunFounder PiDog Bedienungsanleitung
Universal Robots
Universal Robots UR5 Bedienungsanleitung
Universal Robots
Universal Robots E Series Bedienungsanleitung
YASKAWA
YASKAWA MOTOMAN-MPL80 II Bedienungsanleitung
EFORT
EFORT ECR5 Gebrauchsanweisung
