2
Operating Instructions and Parts Manual 24991
8/18
2018 OEMTOOLS™
5 SPEED MINI DRILL PRESS
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your product. Read this manual carefully. Learn the product’s
applications and limitations, as well as potential hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark work areas invite
accidents.
3. Keep children away. All children should be kept away from the
work area. Never let a child handle this product without strict adult
supervision.
4. DO NOT operate this product if under the influence of alcohol or
drugs. Read warning labels on prescriptions to determine if your
judgment or reflexes are impaired while taking drugs. If there is any
doubt, DO NOT attempt to operate.
5. Use safety equipment. Eye protection should be worn at all times
when operating this product. Use ANSI approved safety glasses.
Everyday eyeglasses are NOT safety glasses. Dust mask, non-skid
safety shoes, hard hat or hearing protection should be used in
appropriate conditions.
6. Wear proper apparel. Loose clothing, gloves, neck-ties, rings,
bracelets or other jewelry may present a potential hazard when
operating this product. Keep all apparel clear of the product.
7. DO NOT overreach. Keep proper footing and balance at all times when
operating this product.
8. Check for damage. Check your product regularly. If part of the product
is damaged, it should be carefully inspected to make sure that it can
perform its intended function correctly. If in doubt, the part should
be repaired. Refer all servicing to a qualified technician. Consult your
dealer for advice.
9. Keep away from flammables. DO NOT attempt to operate this product
near flammable materials or combustibles. Failure to comply may
cause serious injury or death.
10. Store idle product out of the reach of children and untrained persons.
This product may be dangerous in the hands of untrained users.
11. Maintain product with care.
12. Keep product dry and clean.
13. DO NOT use a damaged product. Tag damaged products “DO NOT
USE” until repaired.
14. Check for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the product’s operation.
15. Use only accessories that are recommended by the manufacturer for
your model. Accessories that may be suitable for one product may
become hazardous when used on another product.
16. If damaged, have the product serviced before using. Many accidents
are caused by poorly maintained products.
17. Product service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could
result in a risk of injury.
18. When servicing a product, use only identical replacement parts. Use
of unauthorized parts or failure to follow maintenance instructions
may create a risk of injury.
19. Maintain a safe working environment. Keep the work area well lit.
Make sure there is adequate surrounding workspace. Keep the work
area free of obstructions, grease, oil, trash, and other debris. DO NOT
use this product in a damp or wet location.
20. Maintain labels and nameplates on this product. These carry
important information. If unreadable or missing, contact
OEMTOOLS™ for a replacement.
21. Avoid accidental fire and/or explosion. DO NOT smoke near engine
fuel and battery components.
22. We believe the information contained herein to be reliable. However,
general technical information is given by us without charge and
the user shall employ such information at their own discretion and
risk. We assume no responsibility for results or damages incurred
from the use of such information in whole or in part. Always refer to
specific instructions and technical information supplied by the vehicle
manufacturer.
SPECIFIC SAFETY INSTRUCTIONS
AND WARNINGS
WARNING:Read and understand all instructions. Failure to
follow all instructions listed below may result in electric shock, fire
and/or serious injury.
WARNING:For your own safety, DO NOT attempt to operate
your mini drill press until it is completely assembled and installed
according to the manual.
1. DO NOT use your tool where there is a risk of causing a fire or an
explosion; e.g. in the presence of flammable liquids, gases, or dust.
Power tools create sparks, which may ignite the dust or fumes.
2. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control, so visitors should remain
at a safe distance from the work area.
3. Be aware of all power lines, electrical circuits, water pipes and other
mechanical hazards in your work area, particularly those hazards
below the work surface hidden from the operator’s view that may be
unintentionally contacted and may cause personal harm or property
damage.
4. Be alert of your surroundings. Using power tools in confined work
areas may put you dangerously close to cutting tools and rotating
parts.
WARNING:Always check to ensure the power supply
corresponds to the voltage on the rating plate.
5. DO NOT abuse the power cord. Never carry a portable tool by its
power cord, or yank tool or extension cords from the receptacle.
Keep power and extension cords away from heat, oil, sharp edges or
moving parts. Replace damaged cords immediately. Damaged cords
may cause a fire and increase the risk of electric shock.
6. Grounded tools must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never remove
the grounding prong or modify the plug in any way. DO NOT use any
adapter plugs. Check with a qualified electrician if you are in doubt as
to whether the outlet is properly grounded.
7. Double insulated tools are equipped with a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If
it still doesn’t fit, contact a qualified electrician to install a polarized
outlet. DO NOT change the plug in any way.
8. Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock
if your body is grounded.
9. When operating a power tool outside, use an outdoor extension cord
marked “W-A” or “W.” These cords are rated for outdoor use and
reduce the risk of electric shock.
10. DO NOT expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
11. DO NOT let your fingers touch the terminals of plug when inserting
into or removing from the outlet.
12. Ground fault circuit interrupters. If work area is not equipped with a
permanently installed Ground Fault Circuit Interrupter outlet (GFCI),
use a plug-in GFCI between power tool or extension cord and power
receptacle.
13. Stay alert, watch what you are doing and use common sense when
operating a power tool. DO NOT use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal
injury.
14. Dress properly. DO NOT wear loose clothing, dangling objects, or
jewelry. Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught in moving parts. Air
vents often cover moving parts and should be avoided.
15. Use safety apparel and equipment. Use safety goggles or safety
glasses with side shields which comply with current national
