EN-6
Basic Operations
Turn on/off the power
1. Press and release [ ] button to turn the
unit on.
2. Press and hold the [ ] button to turn the
unit off.
Note:
The unit will power on in the same state it
was in when powered off.
Mute
Press the [ ] button to mute the sound.
Note:
• Pressingthe[ ] buttonagainoradjusting
volumewillunmute.
Adjust the Volume
Press the [ ] or [ ] button to increase or
decrease the volume level.
The adjustable range of volume is 0 to 40.
Playing Source Selection
1. Press the [ ] button on the panel to
show main source menu.
2. Touch desired icon on the the screen to
enter corresponding working mode, such
as Disc, Navi, Radio, etc.
Drag left/right to scroll.
Note:
• When some devices are not ready, they
cannot be selected.
• You should stop switching when the playing
source you desired has been selected and
wait for some seconds, the unit will auto enter
the playing source mode you have selected.
When Vehicle is Put in
Reverse
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the previous source after the vehicle has
been taken out of reverse.
When Parking Brake Applied
1. If 'PRK SW' cable is connected to hand
brake switch, the video display of the TFT
monitor will be controlled by driving status,
system setup and input video sources.
2. When the car is moving forward, and a
video source is being played, the screen will
display a warning disclaimer and a blank
screen. The warning screen will prevent the
driver from watching images.
Customized
Press the [ ] of the main menu.
1. Choose theme:
[Theme 1], [Theme 2].
2. Choose wallpaper:
[Live wallpapers]: to show the wallpapers
with animation stored in the unit. Drag up/
down to scroll.
[Photo]: to visit the photo of mobile storage.
[Wallpapers]: to show the wallpapers stored
in the unit. Drag left/right to scroll.
Select desired picture to view, touch [Set
wallpaper] to conrm selection.
3. Choose LOGO
