OHAUS 30469913 Bedienungsanleitung

DEFENDER 3000 Series Drum Scale

Instruction Manual

Báscula de plataforma serie DEFENDER 3000

Manual de instrucciones

Balance à tambour Série DEFENDER 3000

Manuel d’instructions

DEFENDER 3000 Series Drum Scale

EN-1

INTRODUCTION

This manual contains installation, operation and maintenance instructions for the DEFENDER 3000 Series Drum

Scale.

SAFETY PRECAUTIONS

CAUTION: Read all safety warnings before installing, making connections, or servicing this

equipment. Failure to comply with these warnings could result in personal injury and/or property

damage. Retain all instructions for future reference.

Verify that the AC adapter’s input voltage range and plug type are compatible with the local AC mains power

supply.

Make sure that the power cord does not pose a potential obstacle or tripping hazard.

Do not position the equipment such that it is difficult to reach the power connection.

Operate the equipment only under ambient conditions specified in these instructions.

Do not operate the equipment in wet, hazardous or unstable environments.

The foundation at the installation site must be capable of safely supporting the weight of the Drum Scale plus

the weight of the maximum load.

Ensure that vibrations due to machinery near the installation site are kept to a minimum.

Disconnect the equipment from the power supply when cleaning.

Use only approved accessories and peripherals.

Service should only be performed by authorized personnel.

Intended Use

Use the equipment exclusively for weighing, as described in these operating instructions. Any other type of use

and operation beyond the limits of technical specifications, without written consent from OHAUS, is considered as

not intended. This instrument complies with current industry standards and the recognized safety regulations;

however, it can constitute a hazard in use. If the instrument is not used according to these operating instructions,

the intended protection provided by the instrument may be impaired.

DEFENDER 3000 Series Drum Scale

EN-2

INSTALLATION

THE DRUM SCALE BASE IS HEAVY -- PLEASE MOVE THE DRUM SCALE CAREFULLY!

Unpacking

1.Remove the outer packaging

materials from the Drum Scale.

2.Lift it up to vertical by handles.

3.Move it into the required

position on its wheels.

Figure 1.

Figure 2.

DEFENDER 3000 Series Drum Scale

EN-3

Positioning

Ensure the surface is flat in the area where the scale will be positioned, especially in the region of the load cell feet.

Small differences in height can be compensated by adjusting the load cell feet.

1. The Indicator is included with the Drum Scale. Ensure that it is kept with the Drum Scale during positioning

and protected along with the attached connecting cable.

2. Lower the scale base carefully onto to the floor in the final work area.

3. Check that the Drum Scale is level; check that the 4 feet are in contact with the ground; make adjustments

by rotating the nuts on the load cell feet or rotating the foot bolt head with slot with a screwdriver from the

top (see the figure below). Use an external level.

4. Ensure that the Drum Scale’s cables do not become trapped or crushed during lifting or positioning.

Connecting an Indicator

Align the tab on the inside of the loadcell connector socket on the indicator to the slot on the loadcell cable

connector end. Insert the cable connector end into the indicator as shown below and then fasten it by rotating the

locking collar.

Caution: Pay attention on PINs when connect to the indicator, otherwise connector may be broken. Ensure that

the cable is protected against possible damage when routed to the indicator.

DEFENDER 3000 Series Drum Scale

EN-4

OPERATION

For setup, calibration and proper operation, refer to the instruction manual supplied with the indicator. Refer to the

specifications section of the Drum Scale for capacity and readability information.

For continued best operating performance:

Avoid falling loads, shocks and hard lateral impacts

When weighing, all items should be centrally located on the Drum Scale and not

over hanging the sides or the ramps.

Verify the calibration of the Drum Scale system at regular intervals.

Operating Limits

Although the Drum Scales have extremely rugged construction, certain load limits must not be exceeded.

Depending on the type of loading, the maximum safe static load, i.e. the maximum permissible loading, is shown in

Table 2.

TABLE 2. MAX ADMISSIBLE LOADING

Model

Maximum Central Load 1

(80% Surface Area)

Maximum side Load 2

(30% Surface Area)

One Side corner load 3

(10% Surface Area)

DFD32M500ES

825lb / 375 kg

660lb / 300 kg

440lb / 200 kg

DFD32M1000ES

1650lb / 750 kg

990lb / 300 kg

660lb / 300 kg

DFD32M2500ES

4125lb / 1870 kg

1650lb / 750 kg

1100lb / 500 kg

DFD32M1000ER

1650lb / 750 kg

990lb / 300 kg

660lb / 300 kg

DFD32M2500ER

4125lb / 1870kg

1650lb / 750 kg

1100lb / 500 kg

DEFENDER 3000 Series Drum Scale

EN-5

MAINTENANCE

Daily Checks

Check that the rocker feet are properly seated in the holes of each load cell.

Check that the 4 feet are in contact with ground.

Check that the scale is free from debris, especially under the edges of the scale.

Check that there is no damage to the connecting cable.

Cleaning

Risk of Electrical Shock

Disconnect the power source before cleaning the scale with any liquids.

Maintenance of the Drum Scale is limited to regular cleaning.

–Wipe surfaces with a damp cloth.

–Use only common mild cleaning agents.

–Never use water spray or high pressure cleaners.

–Keep the air gap at the bottom of the Drum Scale free of debris.

DEFENDER 3000 Series Drum Scale

EN-6

TECHNICAL DATA

The technical data is valid under the following conditions:

Pollution degree 2

Installation category II

Altitude 4000m

Humidity: Maximum 80% for temperatures up to 31°C decreasing linearly to 50% at 40°C; non-condensing

Electrical supply: 9-12VDC 500mA

Indoor use only

Temperature range: -10°C to 40°C

The mains supply voltage fluctuations are not to exceed ±10 % of the nominal supply voltage

Specifications

TABLE 3. DRUM SCALE SPECIFICATIONS

Model

DFD32M500ES

DFD32M1000ES

DFD32M2500ES

DFD32M1000ER

DFD32M2500ER

Capacity ×Readability

500 lb ×0.1 lb /

250 kg ×0.05 kg

1,000 lb ×0.2 lb /

500 kg ×0.1 kg

2,500 lb ×0.5 lb /

1,250 kg ×0.2 kg

1,000 lb ×0.2 lb /

500 kg ×0.1 kg

2,500 lb ×0.5 lb /

1,250 kg ×0.2 kg

Platform Dimensions

30 x 30 in. / 762 x 762 mm

36 x 36 in. / 914 x 914 mm

Deck Material

Painted Carbon Steel, treaded surface, fixed top plate

Feet

4 ×swivel design, screw-in, carbon steel with rubber bottom cap, top adjustable

Maximum Central Load

100% of maximum capacity

Load Cell

4 ×IP67 nickel plated alloy steel load cells, shear beam

Junction Box

IP65, Die-cast Aluminum, with 6m(20') indicator cable

Operating Temperature

14 °F to 104 °F / -10 °C to 40 °C

Indicator

T32M, ABS plastic face plate, painted metal rear housing

Weighing Units

lb, kg

Modes

Weighing, Parts Counting, Dynamic Weighing, Display Hold, Check Weighing, Accumulation

Display

6-digit, 7-segment LCD, 25mm digit height, high-contrast white LED backlight

Keypad

4 function mechanical switches, raised tactile keys

Stabilization Time

Within 2 seconds

Auto-zero Tracking

Off, 0.5, 1 or 3d

Zeroing Range

2% or 100% of capacity

Span Calibration

5 lb or kg to 100% of capacity

Interface

RS232, bi-directional

Power

9-12 VDC, 0.5A, AC adapter (output)

Indicator Dimensions

(W ×D ×H)

7.8 x 1.8 x 5.2 in. / 198 x 46 x 132 mm

Scale Shipping

Dimensions (W ×D ×

41.1 ×40.2 ×7.9 in. /

1,044 ×1,022 ×200 mm

46.9 ×46.3 ×7.9 in. /

1,190 ×1,175 ×200 mm

Scale Net Weight

101 lb / 46 kg

126 lb / 57 kg

Scale Shipping Weight

110 lb / 50 kg

135 lb / 61 kg

DEFENDER 3000 Series Drum Scale

EN-7

DRAWINGS

Figure 2. Drum Scale Dimensions

TABLE 4. DRUM SCALE DIMENSIONS

MODELS

DIMENSIONS(in. /mm)

DRUM SCALE PLATFORM

FOOT CENTERS

DFD32M500ES

37.9 in. / 962 mm

40.4 in. / 1024 mm

4 in. / 100 mm

34 in. / 862 mm

36 in. / 914.4 mm

DFD32M1000ES

37.9 in. / 962 mm

40.4 in. / 1024 mm

4 in. / 100 mm

34 in. / 862 mm

36 in. / 914.4 mm

DFD32M2500ES

37.9 in. / 962 mm

40.4 in. / 1024 mm

4 in. / 100 mm

34 in. / 862 mm

36 in. / 914.4 mm

DFD32M1000ER

43.9 in. / 1114.4 mm

46.1 in. / 1170 mm

4 in. / 100 mm

41.8 in. / 1060.4 mm

40 in. / 1014.4 mm

DFD32M2500ER

43.9 in. / 1114.4 mm

46.1 in. / 1170 mm

4 in. / 100 mm

41.8 in. / 1060.4 mm

40 in. / 1014.4 mm

MODELS

DIMENSIONS(in. /mm)

DFD32M500ES

30 in. / 762 mm

2 in. / 50 mm

DFD32M1000ES

30 in. / 762 mm

2 in. / 50 mm

DFD32M2500ES

30 in. / 762 mm

2 in. / 50 mm

DFD32M1000ER

36 in. / 914.4 mm

2 in. / 50 mm

DFD32M2500ER

36 in. / 914.4 mm

2 in. / 50 mm

DEFENDER 3000 Series Drum Scale

EN-8

COMPLIANCE

ISO 9001 Registration

Ohaus Corporation, USA, was registered to the ISO 9001:2015 standard.

FCC Note

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

Please note that changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

WARRANTY

Ohaus products are warranted against defects in materials and workmanship from the date of delivery through the

duration of the warranty period. During the warranty period Ohaus will repair, or, at its option, replace any

component(s) that proves to be defective at no charge, provided that the product is returned, freight prepaid, to

Ohaus.

This warranty does not apply if the product has been damaged by accident or misuse, exposed to radioactive or

corrosive materials, has foreign material penetrating to the inside of the product, or as a result of service or

modification by other than Ohaus. In lieu of a properly returned warranty registration card, the warranty period shall

begin on the date of shipment to the authorized dealer. No other express or implied warranty is given by Ohaus

Corporation. Ohaus Corporation shall not be liable for any consequential damages.

As warranty legislation differs from state to state and country to country, please contact Ohaus or your local Ohaus

dealer for further details.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere OHAUS Skala Handbücher

OHAUS

OHAUS Valor V31X Bedienungsanleitung

OHAUS

OHAUS Defender 6000 Indicators Bedienungsanleitung

OHAUS

OHAUS Ranger RD Bedienungsanleitung

OHAUS

OHAUS Traveler Series Bedienungsanleitung

OHAUS

OHAUS 5000 Bedienungsanleitung

OHAUS

OHAUS Pioneer PX85 Bedienungsanleitung

OHAUS

OHAUS Valor V11PW3 Bedienungsanleitung

OHAUS

OHAUS DEFENDER D60ER Bedienungsanleitung

OHAUS

OHAUS Adventurer AX224N Bedienungsanleitung

OHAUS

OHAUS Valor 2000 V22PW Installationsanleitung

OHAUS

OHAUS Defender 3000 Bedienungsanleitung

OHAUS

OHAUS Valor 1000 Bedienungsanleitung

OHAUS

OHAUS ES series Bedienungsanleitung

OHAUS

OHAUS valor 5000 series Bedienungsanleitung

OHAUS

OHAUS Navigator NV212 Bedienungsanleitung

OHAUS

OHAUS Ranger Counting Scale Bedienungsanleitung

OHAUS

OHAUS Valor 3000 Bedienungsanleitung

OHAUS

OHAUS Adventurer Pro Bedienungsanleitung

OHAUS

OHAUS CS 200 Bedienungsanleitung

OHAUS

OHAUS Catapult 1000 Bedienungsanleitung

OHAUS

OHAUS Navigator NV222 Bedienungsanleitung

OHAUS

OHAUS Ranger 3000 Series Bedienungsanleitung

OHAUS

OHAUS FD3 Bedienungsanleitung

OHAUS

OHAUS Compass CX Series Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung