OHAUS Catapult 1000 Bedienungsanleitung

Quick Start Guide Catapult 1000

Ohaus Corporation www.ohaus.com iCatapult 1000 Scales Quick Start Guide

PREPARATION FOR USE

Check Power

If using AC power, be sure local line voltage

matches voltage printed on the scale’s power

adapter. If not, do not use AC power.

Connect adapter plug to input jack at rear.

To use battery power, remove battery cover

and insert three LR14 (“C”) batteries.

Allow at least five minutes warm-up time,

for scale to stabilize before operation.

SELECTING THE LOCATION:

Place on a firm, steady surface with sufficient space.

Avoid excessive air current, vibrations, heat sources, or rapid temperature changes.

SAFETY PRECAUTIONS

For dependable operation of this product, observe the following precautions:

•Verify that the input voltage printed on the power Adapter and the plug type

matches the local power supply (if using AC power).

•Make sure that the power cord does not pose an obstacle or tripping hazard.

•Disconnect the product from the power supply when cleaning.

•Do not operate this product in hazardous or unstable environments.

•Do not drop loads on the pan.

•Use only approved accessories and peripherals, as available.

•Operate the product only under ambient conditions specified in the Instruction

Manual.

•Service should be performed by authorized personnel only.

Power Input Jack

Catapult 1000 Quick Start Guide

Catapult 1000 Scales Quick Start Guide ii Ohaus Corporation www.ohaus.com

CONTROLS

Button Functions

UNITS

Cal

Short Press

Long Press

Changes weighing unit and weighing mode.

In Dynamic Weighing Mode, starts countdown.

Starts calibration.

ON/ZERO

Off

Short Press (when off)

Short Press:(when on)

Long Press

Turns scale on.

Sets display to zero.

Turns scale off.

OPERATION

Power On: Press

All display segments appear, then the software version.

Display resets to zero.

To Zero: Press

when scale is on, display returns to zero.

To Tare: Press

with container on scale. Add mass to see NET weight.

If both sample and container are removed, display shows a negative value.

Overload: If load exceeds scale capacity, “E” appears. Remove load, scale returns to normal.

Auto Shut-Off: When running on batteries, scale turns off after four inactive minutes.

Dynamic Weighing

With platform empty, press

repeatedly until bullet • flashes.

Place a mass on the platform. The scale shows “-A-”.

(If using a container, press ZERO to tare.)

ress

to start the averaging countdown from 5 seconds.

Averaged weight appears. Bullet • stops flashing when process is complete.

Display holds until a button is pressed.

To Exit, remove mass from platform. Press

until kg or lb appears on display.

*80253136*

P/N 80253136

Stability

symbol

Battery charge

symbol

Symbols for weighing modes:

lb – Pounds

•

– Dynamic Weighing

kg – Kilograms

Negative

symbol

Andere Handbücher für Catapult 1000

Inhaltsverzeichnis

Andere OHAUS Skala Handbücher

OHAUS

OHAUS VALOR 5000 H Series Bedienungsanleitung

OHAUS

OHAUS RC31P1502 Bedienungsanleitung

OHAUS

OHAUS PX Series Bedienungsanleitung

OHAUS

OHAUS Valor 6000G X 1G Bedienungsanleitung

OHAUS

OHAUS TA152 Bedienungsanleitung

OHAUS

OHAUS Valor 1500 Series Bedienungsanleitung

OHAUS

OHAUS DIAL-O-GRA 310 Bedienungsanleitung

OHAUS

OHAUS Defender 3000 Series Bedienungsanleitung

OHAUS

OHAUS Defender 3000 Series Bedienungsanleitung

OHAUS

OHAUS CS 2000 Bedienungsanleitung

OHAUS

OHAUS CHAMP II BASE Bedienungsanleitung

OHAUS

OHAUS BW1.5US Bedienungsanleitung

OHAUS

OHAUS 1119-D0 Bedienungsanleitung

OHAUS

OHAUS Ranger 7000 R71MHD3 Bedienungsanleitung

OHAUS

OHAUS a-AB33PH Bedienungsanleitung

OHAUS

OHAUS Defender 3000 Series Bedienungsanleitung

OHAUS

OHAUS T51P Bedienungsanleitung

OHAUS

OHAUS EXPLORER PRO Bedienungsanleitung

OHAUS

OHAUS EC Series Bedienungsanleitung

OHAUS

OHAUS PR Series Bedienungsanleitung

OHAUS

OHAUS Pioneer PJX Series Bedienungsanleitung

OHAUS

OHAUS Defender 6000 Series Bedienungsanleitung

OHAUS

OHAUS EXPLORER Bedienungsanleitung

OHAUS

OHAUS Scout Pro Balance Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung