OHAUS Explorer E1F110 Bedienungsanleitung

Inhaltsverzeichnis

Andere OHAUS Skala Handbücher

OHAUS

OHAUS Adventurer AX124/E Bedienungsanleitung

OHAUS

OHAUS Valor 6000G X 1G Bedienungsanleitung

OHAUS

OHAUS Scout STX Series Bedienungsanleitung

OHAUS

OHAUS CHAMP II BASE Bedienungsanleitung

OHAUS

OHAUS Valor 7000 series Bedienungsanleitung

OHAUS

OHAUS Navigator Bedienungsanleitung

OHAUS

OHAUS Defender 3000 Series Bedienungsanleitung

OHAUS

OHAUS Defender 3000 Series Bedienungsanleitung

OHAUS

OHAUS Defender 3000 Series Bedienungsanleitung

OHAUS

OHAUS SKIPPER 6000 Kurzanleitung

OHAUS

OHAUS EX224 Bedienungsanleitung

OHAUS

OHAUS ES series Bedienungsanleitung

OHAUS

OHAUS Adventurer AX224N Bedienungsanleitung

OHAUS

OHAUS Defender 3000-i-D33 Bedienungsanleitung

OHAUS

OHAUS JR 300T Bedienungsanleitung

OHAUS

OHAUS CW-11 Bedienungsanleitung

OHAUS

OHAUS CS 2000 Bedienungsanleitung

OHAUS

OHAUS Ranger R21PE1502 Bedienungsanleitung

OHAUS

OHAUS PJX Series Bedienungsanleitung

OHAUS

OHAUS Defender D12RQR Bedienungsanleitung

OHAUS

OHAUS VALOR 4000 Bedienungsanleitung

OHAUS

OHAUS AV53 Bedienungsanleitung

OHAUS

OHAUS CS 2000 Bedienungsanleitung

OHAUS

OHAUS EX124 Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung

Ohaus Explorer

Manufacturer: Ohaus

Product Range: Explorer

Model Tested: E1F110

Capacity - 6100g

Readability - 0.1g

Note:

The Explorer normally comes with an RS232 serial interface fitted as standard, please check with your balance supplier

that this is the case.

Setting up the balance:

• Getting into RS232 Mode

Turn the unit on.

Press the “Setup” button.

Press the “right” button until “RS232” is displayed then press the “Enter” button.

• Setting the Baud rate to 1200.

“BAUD” should now be displayed, press the “Enter” button.

Press the up or down buttons until “1200” is displayed then press the “Enter” button.

• Setting the Parity to none.

“PARITY” should now be displayed, press the “Enter” button.

Press the up or down buttons until “nonE” is displayed then press the “Enter” button.

• Setting the Data to 7 bits.

“DATA” should now be displayed, press the “Enter” button.

Press the up or down buttons until “7” is displayed then press the “Enter” button.

• Setting the Stop bits to 2.

“STOP” should now be displayed, press the “Enter” button.

Press the up or down buttons until “2” is displayed then press the “Enter” button.

• Setting Lock to Off.

“LOCK” should now be displayed, press the “Enter” button.

Press the up or down buttons until “OFF” is displayed then press the “Enter” button.

• Returning to normal operation.

“EXIT” should now be displayed, press the “Enter” button.

Serial Balance Adapter Data Sheet OH-2

© DCP Microdevelopments Ltd www.dcpmicro.com [email protected] 12/12/00

Setting up the balance (continued):

• Getting into Print setup mode.

Press the “Setup” button.

Press the “right” button until “PRINT” is displayed then press the “Enter” button.

• Setting the balance to autoprint.

“AUTOPRT” should now be displayed, press the “Enter” button.

Press the up or down buttons until “CONT” is displayed then press the “Enter” button.

• Returning to normal operation.

Press the left or right buttons until “Exit” is displayed, press the “Enter” button.

The balance is now set up to work with the LogIT Serial Balance Adapter - See Connecting the Balance for details of the

lead required to connect the balance to the LogIT Adapter.

Connecting the balance:

A cable must be made to connect the balance serial port to the LogIT Serial Adapter using the wiring information below.

Explorer RS232 port, 9 way D Socket Balance Adapter, 9 Way D Socket

pin 2 pin 2

pin 5

pin 6

pin 7 pin 5

Note: These connection instructions are designed for use with the 9 pin boxed version of the LogIT Serial Balance

Adapter. If using the original 25 pin lead type connection you need to use adapter pin 3 instead of pin 2 (data out) and

adapter pin 7 instead of pin 5 (ground).

Serial Balance Adapter Data Sheet OH-2

© DCP Microdevelopments Ltd www.dcpmicro.com [email protected] 12/12/00

Connect balance pin 5 to pin 6 to bypass handshaking