OHAUS SCOUT II Bedienungsanleitung

Ohaus Scout II (RS232)

Manufacturer: Ohaus

Product Range: Scout 2

Model Tested: SR2020

Capacity - 200g

Readability - 0.01g

Note:

The Scout 2 must be a version with an in built RS232 interface (the product code for these normally start with SRxxxx) to

work with the LogIT Serial Balance Adapter. A separate LogIT adapter is available for the non RS232 Scout balances -

contact your LogIT distributor or see www.dcpmicro.com.

Setting up the balance:

• Getting into Menu Mode

Starting with the Balance turned off, press and hold the “Zero/On” button until the word “MENU” is displayed on the

balance, now release the button, the display should now read “A. OFF”

Press the “Mode” button repeatedly until “Print” is displayed.

• Turning the RS232 Interface ON.

Press the “Zero” button, “Powr” should now be displayed.

Press the “Zero” button, the display will now read either “on” or “OFF”.

Press the “Mode” button repeatedly until “On” is displayed.

Press the “Zero” button, “Powr” should now be displayed again.

• Setting the Baud rate to 1200.

Press the “Mode” button, “bAud” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “1200” is displayed.

Press the “Zero” button, “bAud” should now be displayed again.

• Setting the number of data bits to 7.

Press the “Mode” button, “dAtA” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “-7-” is displayed.

Press the “Zero” button, “dAtA” should now be displayed again.

• Setting the parity to none.

Press the “Mode” button, “PAr” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “nonE” is displayed.

Press the “Zero” button, “PAr” should now be displayed again.

Serial Balance Adapter Data Sheet OH-4

Setting up the balance (continued):

• Setting the stop bits to 2.

Press the “Mode” button, “StoP” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “-2-” is displayed.

Press the “Zero” button, “StoP should now be displayed again.

• Setting the balance to send continuous data.

Press the “Mode” button, “APrnt” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “Cont” is displayed.

Press the “Zero” button, “APrnt” should now be displayed again.

• Setting the balance to send out all readings.

Press the “Mode” button, “PrStb” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “OFF” is displayed.

Press the “Zero” button, “PrStb” should now be displayed again.

• Returning back to normal balance operation.

Press the “Mode” button, “END” should now be displayed.

Press the “Zero” button.

The balance is now set up to work with the LogIT Serial Balance Adapter - See Connecting the Balance for details of the

lead required to connect the balance to the LogIT Adapter.

Connecting the balance:

A cable must be made to connect the balance serial port to the LogIT Serial Adapter using the wiring information below.

Scout 2 RS232 port, 9 way D Socket Balance Adapter, 9 Way D Socket

pin 2 pin 2

pin 5

pin 6

pin 7 pin 5

Note: These connection instructions are designed for use with the 9 pin boxed version of the LogIT Serial Balance

Adapter. If using the original 25 pin lead type connection you need to use adapter pin 3 instead of pin 2 (data out) and

adapter pin 7 instead of pin 5 (ground).

Serial Balance Adapter Data Sheet OH-4

Connect balance pin 5 to pin 6 to bypass handshaking

Andere Handbücher für SCOUT II

Inhaltsverzeichnis

Andere OHAUS Skala Handbücher

OHAUS

OHAUS valor 5000 series Bedienungsanleitung

OHAUS

OHAUS Scout SPX Series Bedienungsanleitung

OHAUS

OHAUS 700 Series Kurzanleitung

OHAUS

OHAUS CS Series Bedienungsanleitung

OHAUS

OHAUS Valor 1000 Bedienungsanleitung

OHAUS

OHAUS Valor 3000 Bedienungsanleitung

OHAUS

OHAUS Emerald Bedienungsanleitung

OHAUS

OHAUS Harvard Trip 1450-SD Bedienungsanleitung

OHAUS

OHAUS VN Series Bedienungsanleitung

OHAUS

OHAUS Harvard Junior Bedienungsanleitung

OHAUS

OHAUS SJX323 Bedienungsanleitung

OHAUS

OHAUS Valor 1000 Bedienungsanleitung

OHAUS

OHAUS 5000 Bedienungsanleitung

OHAUS

OHAUS Catapult 1000 Bedienungsanleitung

OHAUS

OHAUS Explorer EX6202N Bedienungsanleitung

OHAUS

OHAUS 5000 Bedienungsanleitung

OHAUS

OHAUS RANGER 4000 Series Bedienungsanleitung

OHAUS

OHAUS Ranger RC Bedienungsanleitung

OHAUS

OHAUS Scout pro Bedienungsanleitung

OHAUS

OHAUS DISCOVERY BALANCE Bedienungsanleitung

OHAUS

OHAUS Defender D12RQR Bedienungsanleitung

OHAUS

OHAUS Dial-O-Gram Bedienungsanleitung

OHAUS

OHAUS JD500 Bedienungsanleitung

OHAUS

OHAUS Adventurer AX124 Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung