OHAUS Scout pro Installationsanleitung

Scout Pro FAQ

AppNotes.v20170811_ AG

For any further questions, please e-mail us at techsupport@ohaus.com, or call us at 973-377-9000 #2 or ext. 7852 from 8AM to 5PM EST

Topic:

This list compiles frequently asked questions about the Scout Pro:

a) How do I turn on the units of measure

b) How do I switch between units of measure

c) How do I calibrate my unit

How to Turn On Units of Measure

Enabling or disabling the units of measure can be accomplished in the UNITS menu.

You can also click here for the user manual -- refer to Section 3: Operations, pages EN-11 (navigating the

main menu) and EN-13 (entering the UNIT menu).

Note1: during MENU navigation, use the following

buttons to initiate selections YES or NO.

Note2: depending on the region,the [ON/ZERO

Off] button may be designated as [ON/ 0/T Off].

1. With the scale (and lock switch) OFF: press

and hold [ON/ZERO Off] (approx. 5 seconds)

until the scale flashes MENU.

2. Release the button once MENU is displayed

After releasing the button, the scale will

display CAL.

3. Press [PRINT Unit] repeatedly until UNIT is

displayed.

4. Once UNIT is displayed, press [ON/ZERO Off]

to select this menu.

YES

. . .

Scout Pro FAQ

AppNotes.v20170811_ AG

For any further questions, please e-mail us at techsupport@ohaus.com, or call us at 973-377-9000 #2 or ext. 7852 from 8AM to 5PM EST

5. Press [PRINT Unit] repeatedly to cycle

through available units of measure.

6. In this example, you want to turn on grams:

Once "g" is displayed, press [ON/ZERO Off]

to select this unit of measure.

7. The current setting is displayed flashing (in

this case: OFF).

Press [PRINT Unit] until "ON" is displayed.

8. Once "ON" is displayed, press [ON/ZERO

Off] to select this setting.

Grams is now turned on and available when

you switch through units of measure during

operations.

9. To exit from the menu and return to

operations:

Press [ON/ZERO Off] again to revert to the

UNIT menu.

10. When UNIT is displayed, press [PRINT Unit]

until END is displayed.

11. Once END is displayed, press [ON/ZERO

Off] to exit from the menu and return to

operations.

Scout Pro FAQ

AppNotes.v20170811_ AG

For any further questions, please e-mail us at techsupport@ohaus.com, or call us at 973-377-9000 #2 or ext. 7852 from 8AM to 5PM EST

How to Switch Between Units of Measure

Long-press [PRINT Unit] to scroll through the enabled units of measure.

If the desired unit of measure is not displayed, make sure it is enabled in the UNITS Menu (see previous

section: How to turn on units of measure).

Press and hold [PRINT Unit] to scroll through the

enabled units of measure.

In this example, the scale is scrolling through

grams and ounces.

Release the button once the desired unit of

measure is displayed.

In this example, grams ("g").

Hint:

For OHAUS products, the second line on the

button generally means a secondary function that

is activated with a long-press.

. . .

Long-press

Scout Pro FAQ

AppNotes.v20170811_ AG

For any further questions, please e-mail us at techsupport@ohaus.com, or call us at 973-377-9000 #2 or ext. 7852 from 8AM to 5PM EST

How to Calibrate

The Scout Pro has two methods of calibration: Span and Linearity. Following is a quick guide on how to

perform a Span calibration.

You can also click here for the user manual -- refer to Section 3: Operations, pages EN-14 and EN-15

(Calibration).

Span calibration uses two calibration points: zero and a specified calibration weight (usually full scale

capacity). Before beginning calibration, make sure the Lock Switch is off, and you have the appropriate

calibration masses.

1. With the scale (and lock switch) OFF: press

and hold [ON/ZERO Off] (approx. 5 seconds)

until the scale flashes MENU.

2. Release the button once MENU is displayed

After releasing the button, the scale will

subsequently display CAL.

Make sure the pan is empty.

3. Press [ON/ZERO Off] to initiate Span

calibration.

4. "-C-" is displayed while the scale is acquiring

the zero value.

5. After establishing the zero point, the second

calibration value is displayed (in this

example, 200g).

. . .

Scout Pro FAQ

AppNotes.v20170811_ AG

For any further questions, please e-mail us at techsupport@ohaus.com, or call us at 973-377-9000 #2 or ext. 7852 from 8AM to 5PM EST

6. Place the requested calibration mass on the

pan, then press [ON/ZERO Off].

7. "-C-" is displayed while the scale is acquiring

the second value.

After establishing the second calibration

point, "DONE" is displayed.

Then the value of the calibration mass is

displayed.

The scale is now calibrated and ready for

operations.

8. Remove the calibration mass, and the scale

will return to zero.

Andere Handbücher für Scout pro

Inhaltsverzeichnis

Andere OHAUS Skala Handbücher

OHAUS

OHAUS 4000W Series Bedienungsanleitung

OHAUS

OHAUS Defender D30BR Bedienungsanleitung

OHAUS

OHAUS Carat Bedienungsanleitung

OHAUS

OHAUS Defender 3000-i-D33 Bedienungsanleitung

OHAUS

OHAUS EXPLORER Bedienungsanleitung

OHAUS

OHAUS 5000 Bedienungsanleitung

OHAUS

OHAUS Scout SPX Series Installationsanleitung

OHAUS

OHAUS PX Series Bedienungsanleitung

OHAUS

OHAUS 4000W Series Bedienungsanleitung

OHAUS

OHAUS Navigator Rechargeable Battery Bedienungsanleitung

OHAUS

OHAUS ANALYTICAL Plus Series Bedienungsanleitung

OHAUS

OHAUS CD-11 Bedienungsanleitung

OHAUS

OHAUS Scout pro Bedienungsanleitung

OHAUS

OHAUS SCOUT II Bedienungsanleitung

OHAUS

OHAUS PR Series Bedienungsanleitung

OHAUS

OHAUS Valor 1000 Bedienungsanleitung

OHAUS

OHAUS RA Series Bedienungsanleitung

OHAUS

OHAUS TA152 Bedienungsanleitung

OHAUS

OHAUS Adventurer AX124 Bedienungsanleitung

OHAUS

OHAUS 30469913 Bedienungsanleitung

OHAUS

OHAUS RI Series Bedienungsanleitung

OHAUS

OHAUS B10P Bedienungsanleitung

OHAUS

OHAUS Navigator NV212 Bedienungsanleitung

OHAUS

OHAUS Pioneer Balances Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung