OHAUS Scout pro Bedienungsanleitung
Scout®
Pro
Balance
Instruction Manual
Balanza Scout®
Pro
Manual de instrucciones
Balance Scout®
Pro
Manuel d’instruction
Ohaus Corporation
19A Chapin Road
P.O. Box 2033
Pine Brook, NJ 07058
USA
hereby declares that the following products are in conformity with the EEC directives listed below
(including any and all modifications).
Balance models: SP123, SP202, SP401, SP402, SP601, SP2001, SP2001N, SP4001, SP6000,
SPE123, SPE202, SPE402, SPE401, SPE601, SPE2001, SPE4001, SPE6000, SPU123, SPU202,
SPU402, SPU401, SPU601, SPU2001, SPU4001 SPU6000, SPG123F, SPG202F, SPG402F,
SPG401F, SPG601F, SPG2001F, SPG4001F, SPG6000F, SPS202F, SPS402F, SPS401F, SPS601F,
SPS2001F, SPS4001F, SPS6000F, JS40, JS500, JS1200
Declaration of Conformity
The undersigned, representing the following manufacturer
Ted Xia
President
Ohaus Corporation
Pine Brook, NJ USA
Date: September 22, 2003
ISO 9001 Certificate for Ohaus Corporation – Ohaus Corporation, USA was examined and
evaluated in 1994 by the Bureau Veritus Quality International (BVQI) and was awarded the ISO 9001
certificate. This certifies that Ohaus Corporation, USA, has a quality system that conforms to the
international standards for quality management and quality assurance (ISO 9000 series). Repeat
audits are carried out by BVQI at intervals to check that the quality system is operated in the proper
manner.
Last two digits of the year which the CE marking was affixed: 03
Urs Müller
General Manager
Ohaus Europe
Greifensee, Switzerland
Date: September 22, 2003
Marking Directive
Electromagnetic compatibility
Compatibilité électromagnétique
Compatibilidad electromagnética
Electrical equipment for measurement, control and
laboratory use
(Class B)
Matériels électriques de mesure, de commande et
de laboratoire — Prescriptions relatives à la CEM
(Class B)
Equipo eléctrico de medida, control y uso en
laboratorio — Requisitos de compatibilidad
electromagnética (Class B)
Standard
EN60950: 1992 + A1: 1993 + A2: 1993 + A3:
1995 + A4: 1997
Safety of information technology equipment.
Seguridad de los equipos de tratamiento de la
información incluyendo los equipos eléctricos de
oficina.
Sécurité des matériels de traitement de
I’information.
73/23/EEC
Low Voltage
Basse tension
Baja tensión
FCC NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
CANADIAN NOTE:
This class B digital apparatus complies with Canadian ICES-003.
Cet appariel numérique de la classe B est conforme à la norme NMB-003 du
Canada.
AS/NZS4251.1 AS/NZS4252.1 Emission and Immunity
13123
SCOUT
PRO
EN-1
TABLE OF CONTENTSTABLE OF CONTENTS
TABLE OF CONTENTSTABLE OF CONTENTS
TABLE OF CONTENTS
1. INTRODUCTION ................................................................................ EN-3
Safety Precautions ............................................................................ EN-3
2. INSTALLATION .................................................................................. EN-3
Unpacking ...................................................................................... EN-3
Installing Components...................................................................... EN-4
Releasing the Shipping Lock ......................................................... EN-4
Platform Installation ..................................................................... EN-4
Draft Shield Installation (120g Model) ............................................ EN-4
Security Bracket ........................................................................... EN-4
Selecting the Location ...................................................................... EN-5
Balances with Level Adjustment ....................................................... EN-5
Connecting Power............................................................................ EN-5
Battery Installation ....................................................................... EN-5
AC Adapter Installation ................................................................. EN-5
3. OPERATION .................................................................................... EN-6
Overview of Controls and Display Functions ........................................ EN-6
Button Functions.......................................................................... EN-8
Symbols Used for Operation of the Balance ..................................... EN-9
Turning the Balance On ................................................................ EN-9
Turning the Balance OFF ............................................................. EN-10
Navigating the Menus .................................................................... EN-10
Menu Structure .......................................................................... EN-11
Entering the Menus .................................................................... EN-11
Accepting/Bypassing an Individual Menu Item ............................... EN-11
Entering the .S.E.T.U.P. Menu ...................................................... EN-12
Turning Display Hold, Totalize or Specific Gravity Mode On ............. EN-13
Exiting the .S.E.T.U.P. Menu ........................................................ EN-13
Entering the .U.N.I.T. Menu ......................................................... EN-13
Parts Counting .......................................................................... EN-14
EN-2 SCOUT
PRO
TABLE OF CONTENTS (Cont.)TABLE OF CONTENTS (Cont.)
TABLE OF CONTENTS (Cont.)TABLE OF CONTENTS (Cont.)
TABLE OF CONTENTS (Cont.)
Calibration .................................................................................... EN-14
Span Calibration ......................................................................... EN-14
Linearity Calibration .................................................................... EN-15
Applications .................................................................................. EN-16
Weighing ................................................................................... EN-16
Weighing with Tare .................................................................. EN-16
Parts Counting ........................................................................... EN-17
Percent Weighing ....................................................................... EN-18
Establishing a New Reference Weight ......................................... EN-19
Exiting Percent Weighing .......................................................... EN-19
Display Hold .............................................................................. EN-19
Exiting Display Hold ................................................................. EN-20
Totalize ..................................................................................... EN-20
Clear Exit Totalize .................................................................... EN-21
Specific Gravity ........................................................................... EN-21
Clear Exit Specific Gravity ........................................................... EN-22
Additional Features........................................................................ EN-22
Weigh Below .............................................................................. EN-22
Lock Switch ............................................................................... EN-23
4. MAINTENANCE ................................................................................ EN-24
Cleaning ....................................................................................... EN-24
Troubleshooting ............................................................................. EN-24
Error Codes List ............................................................................. EN-25
Accessories ................................................................................... EN-26
5. TECHNICAL DATA ............................................................................. EN-27
Specifications ................................................................................ EN-27
Warranty ...................................................................................... EN-29
SCOUT
PRO
EN-3
1. INTRODUCTION
The Scout
Pro
offers parts counting with auto optimization, display hold, totalize, %
weighing and specific gravity mode. Models are available with ranges from 120g to
6000g.
Scout
Pro
standard features include:
• Battery or AC operation (AC adapter included)
• Density/Specific Gravity determination (certain models)
• Integral security bracket
• Programmable auto shut-off
• Span calibration masses included on certain models
• Optional USB or RS232 interface available
Safety Precautions
Please follow the safety precautions as listed:
CAUTION:
• Do not operate the balance around corrosive fumes.
• Use only the adapter provided with the balance.
• Do not try to service the Scout
Pro
balance.
• Before plugging in the balance, make sure that the voltage rating of the
power adapter and the AC Adapter match.
2. INSTALLATION
Unpacking
Inform your Ohaus dealer if parts are missing.
Your Scout
Pro
package contains:
• Scout
Pro
Balance • Warranty card • AC Power Adapter • Platform
• Instruction Manual • Calibration Masses ( on certain models)
• Draft shield (120g Model only) • Specific Gravity Kit (on certain models)
Store the packaging material for future transport.
EN-4 SCOUT
PRO
Platform Installation
Balances with a rectangular platform are placed into the subplatform as shown and
rotated counter-clockwise until it locks. Round platforms are placed straight down
on subplatform.
Releasing the Shipping lock.
Unlocked
Position
Locked
Position
Installing Components
Releasing the Shipping Lock
On top of the balance, turn the pointer 90
degrees counter-clockwise to unlock.
Platform Installations.
Pointer
Draft Shield Installation (120g Model)
Position the keyed draft shield on top of the balance and rotate it until it faces forward.
Installing Draft Shield.
Security Bracket
A security bracket is provided at the rear of the balance allowing the balance to be
secured by an optional cable and lock accessory.
SCOUT
PRO
EN-5
Selecting the Location
For best performance, the Scout
Pro
balance should be used in a clean, stable
environment. Do not use the balance in environments with excessive drafts, with
rapid temperature changes, near magnetic fields or near equipment that generates
magnetic fields, or vibrations.
Incorrect Correct
Bubble Level indicator
Balances with Level Adjustment
Balances containing leveling feet and a
bubble level must be leveled before using.
See illustration for correct leveling.
AC Adapter Input Jack
Connecting Power
Battery Installation
Install the Four “AA” batteries with polarity
as shown in the battery compartment.
AC Adapter Installation
Plug the AC adapter into the jack at the
rear of balance.
Battery and AC Power Connections
Battery
Compartment
Cover
EN-6 SCOUT
PRO
3. OPERATION
Overview of Controls and Display Functions
1
2
3
4
6
7
8 9 10
11 12 1314 15 16
17
18
19
20
2122
2324
25
Top of Balance
Rear of Balance
Display
5
26
27
28
Andere Handbücher für Scout pro
5
Inhaltsverzeichnis
Sprachen:
Andere OHAUS Skala Handbücher
OHAUS
OHAUS SD Series Bedienungsanleitung
OHAUS
OHAUS Ranger R41ME6-M Bedienungsanleitung
OHAUS
OHAUS Compass CR221 Bedienungsanleitung
OHAUS
OHAUS Valor 3000 Bedienungsanleitung
OHAUS
OHAUS Defender 3000 Series Bedienungsanleitung
OHAUS
OHAUS Sapphire JS10 Bedienungsanleitung
OHAUS
OHAUS ranger 7000 Bedienungsanleitung
OHAUS
OHAUS RI Series Bedienungsanleitung
OHAUS
OHAUS Explorer EX1241 Bedienungsanleitung
OHAUS
OHAUS Voyager Balances Bedienungsanleitung
OHAUS
OHAUS Explorer EX6201N Bedienungsanleitung
OHAUS
OHAUS Ranger 7000 R71MHD3 Bedienungsanleitung
OHAUS
OHAUS Scout SJX Series Bedienungsanleitung
OHAUS
OHAUS ES series Bedienungsanleitung
OHAUS
OHAUS 1200-00 Bedienungsanleitung
OHAUS
OHAUS PX Series Bedienungsanleitung
OHAUS
OHAUS Defender 3000 Series Bedienungsanleitung
OHAUS
OHAUS ES series Bedienungsanleitung
OHAUS
OHAUS Courier 7000 Bedienungsanleitung
OHAUS
OHAUS Valor 1000 Bedienungsanleitung
