OHAUS SD Bedienungsanleitung

Quick Start Guide SD Scales

Ohaus Corporation www.ohaus.com iSD Shipping Scales Quick Start Guide

PREPARATION FOR USE

Battery Installation:

Open battery cover on bottom of

the Indicator. Install three LR14

(“C”) batteries (not included).

Orient batteries as shown on

inside cover. Close battery cover.

AC Adapter Installation:

Check that local line voltage

matches voltage printed on the AC

adapter label. Then connect the

scale to the power supply.

Mount Indicator as desired.

…with or without brackets.

Options below:

120mm / 4.72˝

90mm / 3.54˝

SELECTING THE LOCATION:

Place on a firm, steady surface.

Avoid excessive air current, vibrations, heat

sources, or rapid temperature changes.

Use leveling feet to level the base.

SAFETY PRECAUTIONS

•Before plugging in the indicator, verify that local power supply matches voltage printed

on AC adapter. (Use only the adapter provided.)

•Disconnect the indicator from the power supply when cleaning.

•Do not operate this product in hazardous or unstable environments.

•Do not drop loads on the platform.

•Operate the product only under ambient conditions specified in the Instruction Manual.

•Service should be performed by authorized personnel only.

SD Scales Quick Start Guide

SD Shipping Scales Quick Start Guide ii Ohaus Corporation www.ohaus.com

CONTROLS

Button Functions

UNITS

Cal

Short Press

Long Press

Changes weighing unit and weighing mode.

In Dynamic Weighing Mode, starts countdown.

Starts calibration.

ON/ZERO

Off

Short Press (when off)

Short Press:(when on)

Long Press

Turns scale on.

If balance is on, sets display to zero.

Turns scale off.

OPERATION

Power Up Test: Press ON/ZERO Off.All display segments appear, then the software version.

Display resets to zero.

Zero Function: Press ON/ZERO Off when scale is on, display returns to zero.

When adding additional mass, press ON/ZERO Off repeatedly to scale’s full capacity.

With a container, press ON/ZERO Off to Tare. Add mass to see NET weight. If both sample

and container are removed, a negative value will be displayed. Press ON/ZERO Off to Zero.

Overload: If load exceeds scale capacity, “E” appears. Remove load, scale returns to normal.

Auto Shut-Off: When running on batteries, scale turns off after four inactive minutes.

Dynamic Weighing

With platform empty, press UNITS Cal until bullet • flashes.

Place a mass on the platform. The scale shows “-A-”.

(If using a container, press ON/ZERO Off to tare and return to zero.

Short-press UNITS Cal to start the averaging countdown from 5 seconds.

Averaged weight appears. Bullet • stops flashing when process is complete.

Display holds until a button is pressed.

To repeat process, press UNITS Cal with a mass on platform or container.

To Exit, remove mass from platform or container. Press UNITS Cal.

*80253132*

P/N 80253132

Stability

symbol

Battery charge

symbol

Symbols for weighing

modes:

lb – Pounds

•

– Dynamic Weighing

kg – Kilograms

Negative

symbol

Inhaltsverzeichnis

Andere OHAUS Skala Handbücher

OHAUS

OHAUS SB1200 Bedienungsanleitung

OHAUS

OHAUS Navigator Bedienungsanleitung

OHAUS

OHAUS ES6R Bedienungsanleitung

OHAUS

OHAUS CW-11 Bedienungsanleitung

OHAUS

OHAUS RC41M15-M Bedienungsanleitung

OHAUS

OHAUS BW Series Bedienungsanleitung

OHAUS

OHAUS Aviator 2000 Series Bedienungsanleitung

OHAUS

OHAUS PX Series Bedienungsanleitung

OHAUS

OHAUS FD Series Bedienungsanleitung

OHAUS

OHAUS Explorer Balances Bedienungsanleitung

OHAUS

OHAUS Valor 1000 Bedienungsanleitung

OHAUS

OHAUS PX Series Bedienungsanleitung

OHAUS

OHAUS VF Series Bedienungsanleitung

OHAUS

OHAUS CD-11 Bedienungsanleitung

OHAUS

OHAUS Adventurer AX Bedienungsanleitung

OHAUS

OHAUS Ranger RP Compact Scales Bedienungsanleitung

OHAUS

OHAUS skx series Bedienungsanleitung

OHAUS

OHAUS RE-C series Bedienungsanleitung

OHAUS

OHAUS SJX323 Bedienungsanleitung

OHAUS

OHAUS VN Series Bedienungsanleitung

OHAUS

OHAUS TAJ Carat TAJ203 Bedienungsanleitung

OHAUS

OHAUS SD35 Bedienungsanleitung

OHAUS

OHAUS 1400 Series Handbuch

OHAUS

OHAUS A32P3T series Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung