Ohlins HO 360 Bedienungsanleitung

Shock absorber for Honda CBR 1000 RR

ho 360

Mounting Instructions

Note!1

Please note that there can be small differences

between your product and the images in

these instructions.

Note!1

Please note that during storage and transport,

especially at high ambient temperature, some

of the oil and grease used for assembly may

leak and stain the packaging. This will not

cause damage to the product, wipe off the

excessive oil or grease with a cloth.

Note!1

Before you install this product, check the kit

contents. If anything is missing, please contact

an Öhlins dealer.

Warning!⚠

Before you install this product, read the Öhlins

Owner’s manual. This product is an important

part of the vehicle and the vehicle stability.

Kit Contents

Description Part No Pcs

Shock absorber HO360 1

Sticker Memo notes 01180-01 1

Sticker Öhlins wh/tr 01185-01 2

Sticker Öhlins bl/tr 01185-04 2

Screw M10 01239-05 1

Owner’s manual 07242-05 1

Put the motorcycle on a work stand so that the

rear wheel barely touches the ground.

Remove the fairing screw at the bottom.

Remove the lambda cable clip from the frame.

Remove the exup cable behind the rear brake

uid reservoir.

Be careful with the lambda and the exup cable.

Loosen and move the silencer to the right.

Remove the shock absorber screws and the

link screw fromt he swing arm.

Remove the original shock absorber.

MOUNTING INSTRUCTIONS

Warning!⚠

We strongly recommend to let an Öhlins dealer

install this product.

Warning!⚠

If you work with a lifted vehicle, make sure that it

is safely supported to prevent it from tipping over.

Note!1

When you work with this product, see the

vehicle service manual for vehicle specic

procedures and important data.

Note!1

Before you install this product clean the vehicle.

Install the Öhlins shock absorber.

Remove the lower left rear sub frame screw.

use the screw provided in this kit and install the

hydraulic preload adjuster on the inside. Rotate

the adjuster up as much as possible before you

tighten the nut.

Install all removed parts in the same positions

that they were before removal.

Note!1

Lower the vehicle so that the suspension

is slightly compressed before you tighten

the screws.

Caution!✋

Make sure that you tighten all screws to the

correct torque and that nothing fouls or restricts

movement of the shock absorber/front fork/

steering damper when the suspension is fully

compressed or extended.

MOUNTING INSTRUCTIONS

Fairing screw

Rear wheel

Spring preload

adjuster

Reservoir

Link screw

Öhlins Racing AB

Box 722

S-194 27 Upplands Väsby, Sweden

Phone +46 8 590 025 00

fax +46 8 590 025 80

reserved. Any reprinting or

unauthorized use without the written

permission of Öhlins Racing AB

is prohibited.

Öhlins products are subject to

continuous improvement and

development, therefore, although

these instructions include the most

up-to-date information available at

the time of printing, minor updates

may occur.

To nd the latest information

contact an Öhlins distributor.

Please contact Öhlins if you have

any questions regarding the

contents in this document.

SETUP DATA

Spring

preload

adjuster

Compression

damping

adjuster

Rebound

damping

adjuster

Length

adjuster

Warning!⚠

Before you ride/drive, always make sure that the

setup is according to the recommended setup

data. Read about adjustments and setting up

in the Öhlins Owner’s Manual before you make

any adjustments. Contact an Öhlins dealer if

you have any questions about setting up.

ADJUSTMENTS

Part no. MI_HO360_0

Issued 2014-11-18

Length 302 +4/-2 mm

Stroke 60 mm

Rebound 13 clicks

Compression 10 clicks

Spring preload 14 mm

Spring 21040-36

Spring rate 105 N/mm

Spring free length 160 mm

Recommended sag and ride height

R1-R3 32 mm

F1-F3 41 mm

Andere Ohlins Motorradzubehör Handbücher

Ohlins

Ohlins HUSABERG MX 2000 Bedienungsanleitung

Ohlins

Ohlins AP 840 Bedienungsanleitung

Ohlins

Ohlins TR 628 Bedienungsanleitung

Ohlins

Ohlins FG 470 Bedienungsanleitung

Ohlins

Ohlins WR 450 F - 2-TRAC 2005 Bedienungsanleitung

Ohlins

Ohlins FSK 105 Bedienungsanleitung

Ohlins

Ohlins HD 159 Bedienungsanleitung

Ohlins

Ohlins HD 907 Bedienungsanleitung

Ohlins

Ohlins HO 944 Bedienungsanleitung

Ohlins

Ohlins HO 1072 Bedienungsanleitung

Ohlins

Ohlins FGK 202 Bedienungsanleitung

Ohlins

Ohlins FGRT 219 Bedienungsanleitung

Ohlins

Ohlins HO 810 Bedienungsanleitung

Ohlins

Ohlins HO 819 Bedienungsanleitung

Ohlins

Ohlins Ohlins shock absorbers Motorcycle Road &... Bedienungsanleitung

Ohlins

Ohlins BM 205 Bedienungsanleitung

Ohlins

Ohlins 225 TM Bedienungsanleitung

Ohlins

Ohlins FGHO 691 Bedienungsanleitung

Ohlins

Ohlins FKR 118 Bedienungsanleitung

Ohlins

Ohlins SD197 Bedienungsanleitung

Ohlins

Ohlins HO424 Bedienungsanleitung

Ohlins

Ohlins SD 021 Bedienungsanleitung

Ohlins

Ohlins TTX25 Gebrauchsanweisung

Ohlins

Ohlins SU 145 Bedienungsanleitung

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

SW-Motech

SW-Motech SBL.01.971.10000/B Bedienungsanleitung

GÜDE

GÜDE GSH 180-TC-2 Bedienungsanleitung