Oki C931 DICOM Bedienungsanleitung

Recommendations to Optimize Envelope Feeding on OKI C931/941/C942/DP Color Printers

The following recommendations address paper jams due to envelope feeder timing, and help to reduce

printer pausing. The results optimize throughput when printing Com-10 envelopes with an envelope

feeder attached to the C931, C941 or C942.

1. Update the printer firmware to suite version is A01.35 (or higher). An outline of the update process

and a link to the web-site are included near the end of this document.

2. Ensure the following printer menu settings are set at the operator panel:

a) Menu Print Adjust Narrow Paper Speed = Normal 2; Press OK to set and then press On Line

3. Sleep mode and power save modes can be adjusted to avoid excessive warm-up times in-between

jobs. For example, adjust Power Save to 60 minutes:

Menu Menus System Adjust Power Save Time 60 min; Press OK to set and then press On

Line

4. Recommended Driver Settings to minimize printer adjustment cycles for Com-10 envelopes:

a) Media Weight: “Medium Heavy”

b) Media Type: “Plain” (Selecting “Envelope” as the media type runs that printer at a slower speed)

c) Media Size: “Com-10 Custom” (appears in the latest PostScript driver) or select Custom Size and

enter the dimensions for your envelope.

Select the “Custom” sizes (Com-10 Custom, A7 Custom,…) when using well behaved envelopes to

maximize throughput. Selecting non-Custom sizes will run the printer slightly slower and may be helpful

for some jobs.

Input Jams

The majority of paper jams at the MP Tray when using an envelope feeder are related to timing

differences between the feeder and printer. The latest printer firmware includes a setting to help

synchronize the timing:

Menu Calibration Specific Media Feed Mode

The default value is OFF. If you encounter frequent jams at the MP Tray, selecting 1 or 2 will allow

additional time (milliseconds) for the envelope to be handed off from the feeder to the printer.

Paper Jam Recover Tip

The printer will recover faster from a paper jam if you simply open and close the side access door just

below the MP Tray. Opening a front panel used to access toners and drums triggers the printer to

perform calibration cycles, which take longer.

Firmware Update

Here are the general steps:

1. Download and install the "Windows" version of the firmware update tool from the following link:

http://global.okiprintingsolutions.com/FWInterface.nsf/frmmain?OpenForm&Lang=en&RF=http://globa

l.okiprintingsolutions.com/FWInterface.nsf/frmMain?OpenForm&Lang%3Cen%3E

The utility has a small footprint and runs directly from the EXE file (no install program).

2. Run the utility. On the 4th or 5th screen, you will be requested to "Specify the Update Method."

Select the radio button "The latest version of firmware will be downloaded..." and press "Next" to

continue.

Search the local network or USB connection. If necessary press the button "Environment Settings" to

add the printer's IP address for the Network search range.

The Admin password for the printer is "aaaaaa" (lower case "a" six times)

Andere Handbücher für C931 DICOM

1

Dieses Handbuch passt für folgende Modelle

3

Inhaltsverzeichnis

Andere Oki Drucker Handbücher

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung