Oki OKIDATA OL400e Bedienungsanleitung
Manual Name: OKIDATA OL400e & 410e
Chapter: 1 Setting Up your Printer
Select a Suitable Place for your Printer
Select a Suitable Place for your Printer
- A firm surface such as a table or desktop
- Space to open the cover and pull out the paper tray and the rear output extender
- Air circulation around the printer to prevent overheating
- A nearby power source
- Room temperature of 50° to 90°F (10° to 32°C).
- Relative Humidity of 20- 80%
- No direct sunlight
OL400/410ex (96-02-03)
Manual Name: OKIDATA OL400e & 410e
Chapter: 1 Setting Up your Printer
Check the Contents
Unpack your printer. The shipping box should contain:
Okidata OL400e or OL410e Printer Software Support Driver Diskette
Toner Cartridge Printer Handbook
Black light- shield bag (for storing image drum
if printer must be shipped) Power Cord
If you are missing anything, contact your dealer.
OL400/410ex (96-02-03)
Chapter 2
Installing Toner Cartridge
Installing Toner
Press the buttons to release the printer cover (1), then lift up (2). Remove the sponge (3).
Unwrap the toner cartridge (4). Shake the cartridge to distribute the toner (5). Peel tape off the
bottom (6).
Grasp the blue lock lever (1) and place the left side of the toner cartridge under the tab (2).
Lower the right side into the toner well, aligning the lock lever slot (3) with the ridge in drum
cartridge (4). When the cartridge is in place, push the lock lever forward until it stops (5).
Lower the printer cover and press to close (6).
OL400/410ex (96-02-03)
Chapter 3
Choosing Paper
Choosing Paper
- For best results, use paper made for laser printers or photocopiers.
- Weight for automatic feed (top paper exit): 16-24 lb.
- Weight for manual feed (rear paper exit; see ( ): 16-35 lb.
- Smooth finish.
- Letterhead or preprinted forms: ink must be able to withstand 155°C.
OL400/410ex (96-02-03)
Manual Name: OKIDATA OL400e & 410e
Chapter: 3 Loading Paper
Precautions
Precautions
- Store paper in a dark, dry place, with constant temperature and humidity.
- Avoid printing on both sides of the paper.
- Avoid printing on preprinted documents that have been in a photocopier.
- Try paper before you buy it in quantity.
OL400/410ex (96-02-03)
Manual Name: OKIDATA OL400e & 410e
Chapter: 3 Loading Paper
Loading Paper
Loading Paper
Press then release the paper tray handle (1) The tray will spring open (2).
Slide the tray out of the printer (3). Adjust the tray guides for the correct paper size (4).
Fan a stack of paper and place it in the tray under the tabs. Do not fill above the
PAPER FULL mark (5). Place the tray back into the printer then push closed until the
tray locks in place (6).
1
2 3
4
5
PAPER
FULL
6
OL400/410ex (96-02-03)
Manual Name: OKIDATA OL400e & 410e
Chapter: 3 Loading Paper
Paper Exit Paths
Paper Exit Paths
Top paper exit
Pull the front exit extender forward. Lift out the support bar.
- Printed pages exit face down
- Pages are stacked in the order printed
- Exit bin holds 100 sheets of 20-lb. paper
Note: Don't change paper paths while printing, paper jam may occur.
1122OL 4O
Oe
LED
PagePrinter
OL400/410ex (96-02-03)
Manual Name: OKIDATA OL400e & 410e
Chapter: 3 Loading Paper
Rear Paper Exit
Rear Paper Exit
Pull out the rear exit extender until it locks in place. Lift out the support bar. To return to top exit,
push the rear exit extender back in place, paper will then exit into the top bin.
- Printed pages exit up in reverse order
- Maximum output is 50 sheets of 20-lb. paper
- Use rear exit for printing on heavy paper, envelopes, labels, transparencies
or odd size paper.
11
22
OL 4OO e
LED Page Prin
ter
OL400/410ex (96-02-03)
Chapter 1
Turning on the Printer
Turning on the Printer
Make sure the printer is off (1). Plug the cord into the printer first (2), then into a grounded outlet (3).
Turn the printer on (4).It takes about 45 seconds for the printer to initialize, warm up, and display
the ON-LINE message, telling you its ready to receive data.
11
POW ER
ON OFF
POW ER
ONOFF
22
3344
POWER
ON OFF
POWER
ON OFF
OL400/410ex (96-02-03)
Manual Name: OKIDATA OL400e & 410e
Chapter: 4 Plugging in & Testing
Changing the Display Language
Changing the Display Language
To change the language on the panel display and menu printout:
Press ON-LINE (1) until the READY light goes out. Press and hold MENU1/Menu2 (2)
until MEMORY USAGE (OL400e) or PRINT MODE (OL410e) displays. Press MENU1/Menu2 (2)
7 times until the display reads LANGUAGE. Press ENTER/copies (3).
The display now reads LANGUAGE ENGLISH*. Press NEXT+/Demo (4) until the language you
want appears. Press ENTER/Copies (3). Press ON-LINE (1).
OL4OOe
LED Page Printer
0(18 (17(5 /$67 1(;7
0HQX &RSLHV 3DSHU6L]H 'HPR
35,170(18
3ULQW)RQWV5HVHW
)250)(( '
21 /,1(
7UD\6HOHFW
5(&29(5
2.,'$7$
OL400/410ex (96-02-03)
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Oki Drucker Handbücher
Oki
Oki Teriostar LP-1040 Series Bedienungsanleitung
Oki
Oki IP-7900-22/ IP-7900-23 Bedienungsanleitung
Oki
Oki C5500n Series Bedienungsanleitung
Oki
Oki C5100 Bedienungsanleitung
Oki
Oki C810n Montageanleitung
Oki
Oki ML6300FB Bedienungsanleitung
Oki
Oki C844 Einrichtungshandbuch
Oki
Oki B6500 Series Bedienungsanleitung
Oki
Oki C6100dn Bedienungsanleitung
Oki
Oki C810n Bedienungsanleitung
Oki
Oki PT341 Montage- und Bedienungsanleitung
Oki
Oki Microline 320 Bedienungsanleitung
Oki
Oki C9500dxn Bedienungsanleitung
Oki
Oki B B8300 Bedienungsanleitung
Oki
Oki C5100n Firmware-Update
Oki
Oki Teriostar LP-1040 Series Bedienungsanleitung
Oki
Oki B710dn Bedienungs- und Wartungsanleitung
Oki
Oki B4200 Firmware-Update
Oki
Oki LP441w Bedienungsanleitung
Oki
Oki C332dn Gebrauchsanweisung
