OLI DMV-E Bedienungsanleitung
EN
CODE: OLDMVE01AEN | REV:00 | DATE:04/2022
DMV-E
TECHNICAL
CATALOGUE
EN
CONTENTS
T.5
T.7
T.8
T.8
T.9
T.10
T.10
T.10
T.11
T.12
T.12
T.12 - T.13
T.14
T.14
T.14
T.15
T.16
T.16
T.17
Intended Use & Operation .................................................................................
Safety Instructions ................................................................................................
Specic safety rules .............................................................................................
Technical Specications ......................................................................................
Driving motor...........................................................................................................
Operation Instructions ........................................................................................
Connect the exible shaft to the motor.........................................................
Work with the belt.................................................................................................
Compacting the concrete....................................................................................
Trouble shooting ...................................................................................................
Periodic maintenance ‐ Storage ‐ Transportation .....................................
Periodic maintenance...........................................................................................
Storage.......................................................................................................................
Transportation.........................................................................................................
Ordering Spare Parts ............................................................................................
Driving Motor...........................................................................................................
Disposal ....................................................................................................................
Warranty ...................................................................................................................
Declaration................................................................................................................
1.
2.
2.1.
3.
3.1.
4.
4.1.
4.2.
4.3.
5.
6.
6.1.
6.2.
6.3.
7.
7.1
8.
9.
10.
EN
DMV-E
T. 5
REV.00 | 04/2022
OLI S.p.A.
Via Canalazzo, 35
I – 41036 Medolla – (MO)
ITALY
Fax
E-mail
Website
+39 / 0535 / 410611
+39 / 0535 / 410650
www.olivibra.com
General information
1. INTENDED USE & OPERATION
Intended Use
Use the DVM-E concrete vibrator only for compacting concrete. Any other use than intended is prohibited.
You can compact concrete oors, foundations, lintel beams and beams.
This user manual helps you to use the concrete vibrator in the way manufacturer has developed the product. Follow the instructions
strictly.
Operation
The motor unit is started by switching on the ON/OFF‐switch to the‘O/I’position. The drive shafts
rotation turns an eccentric shaft held captive between bearings.The eccentric motion causes the
vibration.The vibrations from the head compact the concrete.
SYMBOLS
!
This symbol indicates extremely dangerous situations that, if neglected, can seriously put the health and safety of people at risk.
EN
DMV-E
T. 6
REV.00 | 04/2022
The Concrete Vibrator
1. Front Lattice
2. ON/OFF’Switch
3. Driving Motor Set
4. Rear Lattice (For Replacing Brush)
5. Cable Protector
6. Cable with Plug
7. Belt with Hook
Name Plate
Pos. Description
AModel
BVoltage
CPhase
DSafety
EFrequency
FRotation per minute
GSerial Number
HInput Power
IWeight
LCurrent
MIP sealing
NCertication
Rpm
Wt.Kg
Pw
S/N.
Ph IP
A
VHz
Medolla (MO)-Italy
www.olivibra.com MADE IN P.R.C.
A
B
C
D
E
F
G
H
I
L
M
N
EN
DMV-E
T. 7
REV.00 | 04/2022
2. SAFETY INSTRUCTIONS
Tip: If the safety instructions are not clear to you, then ask for an explanation from qualied, experienced colleagues of the manufacturer.
• Wear eye protection, helmet and hearing protection
• Wear safety shoes
• Wear protection gloves
Personal Safety
• Always wear eye protection, safety shoes, helmet, gloves and hearing protection.
• Stay alert, watch what you are doing and use common sense when operating power tool.
• Do not use tool while you are tired or under the inuence of drugs, alcohol or medication.
• Avoid accidental starting.
• Be sure the switch is o before plug in.
• Do not overreach.
• Do never work in twilight or dark situations.
Work Area
• Keep your work area clean and well lit.
• Do not operate power tools in explosive atmospheres, such as in the presence of ammable liquid, gases or dust.
• Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control.
Tool Use, Care and Service
• Do not use tool if switch does not turn it on or o.
• Stop use immediately if the rubber hose or the cable is damaged.
• Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool.
• Store out of reach of children and other untrained persons.
• Maintain tool according the instructions and with care.
• Use the power tool in accordance with these instructions, taking into account the working conditions and the work to be performed.
Use of the power tool for operations dierent from those intended could result in a hazardous situation.
• Service must be performed only by qualied repair personnel.
• Use only replacement parts that are recommended by the manufacturer.
Electrical Safety
• Do not modify the plug.
• Do not use any adapter plugs.
• Do not expose power tools to rain or wet conditions.
• Do not abuse the cord.
• Never use the cord to carry the tool.
• Keep the cord away from heat, oil, sharp edges or moving parts.
• Never use the vibrator with damaged cords. Damaged cords increase the risk of electric shock. Bring the vibrator to a qualied
electrician for replacing the cord.
• When operating a power tool outside, use an outdoor extension cords marked“W‐A”,“W”or“H07RN‐F”.
EN
DMV-E
T. 8
REV.00 | 04/2022
2.1 SPECIFIC SAFETY RULES
3. TECHNICAL SPECIFICATIONS
Well Instructed
• For the proper operation of motor, make sure that the operators have been instructed in the roper management of this machine.
Electrical Connection
• Before connecting the motor to the electrical system, make sure that the voltage and frequency coincide with the ones stated in the
characteristics equipment plate, located in the top part of the housing.
• When connecting to a generator, make sure that the out tension and frequency is stable, right and ha the proper power (the motor’s
feeding voltage should not vary more than ±5% as stated on the motor’s plate).
Area of Work
• Do not work close to ammable liquids or in areas exposed to ammable. Ensure that all frame screws are tight before starting to work.
• Do not permit untrained personnel to operate the motor or connections. Maintain free ventilation of air.
• When nishing the job or when taking a break, the operator should unplug, disconnect it from the electrical system and have it placed
in such a way that it should fall or tip.
Improper Use
• Do not connect the exible shaft to the motor when this is working.
• Do not work with the plastic housing broken.
• Do not use the plug should to start or stop the equipment.
• Do not remove the electrical feeding cable to remove the plug from the socket.
• Make sure that the electrical cable is with the proper section and functioning properly.
Before Repair
• Before you start and type of repair, disconnect the motor from the electrical system.
EN
DMV-E
T. 9
REV.00 | 04/2022
3.1 DRIVING MOTOR
Overview
S/N Item Description
1MotorType Universal Single Phase
2Electric InsulationType Double Insulation, IPX4
3Housing Polyamide 6.6 + 30%GF
4Power 2,300W
5Voltage 220‐240V or 110‐130V ‐ 50/60Hz
6Loading Consumption 10A (220V) / 13A (110V)
7Unloaded Speed 17,500 rpm
8Noise Emission 77 ‐ 80 dB(A)
9Vibration XP25 ‐ 1.16m/s2, XP30 ‐ 1.28m/s2, XP38 ‐ 1.41m/s2, XP48 ‐ 1.53m/s2, XP58 ‐ 2.11m/
s2
10 Loaded Speed 12000rpm
11 NetWeight 5.5 kgs
12 Function Transmits rotation power to an internal vibrator by a exible shaft
13 Connection to Flexible Shaft Female Square 7
14 ConnectionType LeftThread M36x2
EN
DMV-E
T. 10
REV.00 | 04/2022
4. OPERATION INSTRUCTIONS
4.1 CONNECT THE FLEXIBLE SHAFT TO THE MOTOR
4.2 WORK WITH THE BELT
Warning! Check that the ON/OFF‐switch is switched OFF
and not connect the plug yet.
Caution! Check that there’s no any break on hand‐held
rubber hose.
Caution! Check that the poker is well fastened to the
exible shaft.
Warning! Check that the ON/OFF‐switch is switched OFF and not connect the plug yet.
Caution! Check that there’s no any break on hand‐held rubber hose.
Caution! Check that the poker is well fastened to the exible shaft.
Tip! Use the belt, it will lighten your work.
1. Fasten the two belt hooks on the two belt hook positions.
2. Wear the belt onto your shoulder.
Inhaltsverzeichnis
Andere OLI Motor Handbücher
