Oliso project iron M3PRO Bedienungsanleitung
changing cord exit position
M3PRO
project iron™
read all instructions before starting
if cord is damaged or cover does not close properly, stop and contact customer service
important safety instructions
Before beginning conversion make sure the iron is cold and unplugged from the outlet, and empty of water.
If the cover does not fit snugly back in place, remove and check cord is in the right place.
Be careful when fastening the cover in place not to trap the cord between the retainer as it could damage
the cord.
Reassemble the cover completely and secure the screws before plugging the iron into the outlet again.
Only use the original parts of the iron to reassemble, do not substitute or modify the parts in any way, or add
additional parts or material to the iron.
Be careful to not damage the power cord with the tools. If damage occurs stop and contact oliso customer service.
Be careful not to overly twist the cord when moving.
Ensure cord is fully under retainer before closing the cover.
We recommend changing the cord exit position only once.
1
2
3
4
5
6
7
8
9
switch off - unplug iron - let cool.
locate the silicone screw covers
on either side of the label
remove covers with a pointy tool or
tweezers and set aside.
step 1
what you will need
unscrew and set screws aside. unhook cable from retainer.
Locate Philips head screws. Gently loosen cover by lifting directly
away from iron. Cable and cover will
remain attached to iron.
step 2 step 3
1.
2.
changing cord exit position
3.
A tool with a soft durable point
(like a pencil or tweezers).
1.
Stable surface and a soft cloth
or towel to protect the surface
and the iron.
2.
#1 Phillips head handheld
screwdriver. Do not use a
powered screwdriver.
changing cord exit position
tuck power cable under retainer.
turn cover 180 degrees so cord
exit is on opposite side.
step 4
slide cover firmly in place, ensuring
cable is not above retainer.
printed text will be upside down.
Insert screws and hand tighten only.
Do not use iron until cover is
securely fastened in place.
align the grooves in the grey cover
with the white rails in the iron.
check cover fits correctly, if not
remove and check cord position.
step 5 step 6
Reinsert silicone covers to
complete conversion.
If at any time during the
conversion the cable becomes
damaged or trapped, or you are
unable to easily reclose the cover
do not use the iron and contact
oliso consumer service who will
help you resolve the issue.
step 7
8:30am - 4:30pm (Pacific) Monday-Friday 1-800-899-5157
or mail us at 548 Market St #89615 San Francisco, CA 94104, USA
For more information visit
customerservice@oliso.com
oliso.com
1.
2.
Andere Handbücher für project iron M3PRO
1
Andere Oliso Eisen Handbücher
Oliso
Oliso TG-800 Bedienungsanleitung
Oliso
Oliso project iron M3PRO Bedienungsanleitung
Oliso
Oliso smartiron TG1050 Bedienungsanleitung
Oliso
Oliso Touch & Glide Bedienungsanleitung
Oliso
Oliso smart iron TG1600Pro+ Bedienungsanleitung
Oliso
Oliso Mini Project Iron M2Pro Bedienungsanleitung
Oliso
Oliso Smart Iron TG1250 Bedienungsanleitung
Oliso
Oliso Smartiron Bedienungsanleitung
Oliso
Oliso smartiron TG1600Pro+ Bedienungsanleitung
