Olivetti D-COLOR MF222plus Bedienungsanleitung

E-1

INSTALLATION MANUAL

d-Color MF 552 plus/d-Color MF 452 plus/

d-Color MF 362 plus/d-Color MF 282 plus/d-Color MF 222 plus

Be sure to correctly follow the procedures in order as explained in this Installation Manual.

If you do not follow the procedure in order, the image trouble may occur.

©Olivetti S.p.A

I. Outline of installation procedures (d-Color MF 552 plus/d-Color MF 452 plus)

When installing the machine and associated options as a system, follow the order shown on the upper.

Caution:

• For the detailed installation procedures for each

option, follow the instructions given in the corre-

sponding installation manual and perform the

procedures correctly. (Optional devices must be

installed after completing the main unit installa-

tion.)

• Once the Power Switch is turned ON, do not

turn OFF it until the installation work has been

completed.

• When placing the machine on the floor, make

sure to use the paper feed cabinet to secure the

performance and the quality of the product.

• Lifting the machine in an awkward position or

transporting it in a poorly balanced position

could result in personal injury. When transport-

ing the machine, assign an adequate number of

persons to the job and ensure that each person

can take a good position of not being exces-

sively loaded.

(mass: approx. 101 kg (222-11/16 lb))

AU-102 WT-506

AU-201*2

SP-501

PC-110

OT-506

Machine

PC-210

MK-730

FS-534FS-533PK-519

MK-734

KH-102

PC-410

TK-101

AU-201*1

MK-735

HT-509

ZU-606*4

FS-535*4

JS-506

LU-204

LU-301

PK-520

SD-511

JS-602*4

PI-505*4

PK-521*4

SD-512*4

UK-204*3

Electronic system options

EK-606*3 EK-607*3

SC-508*3

FK-511

VI-506

IC-414

✱Electronic system options

*1: When installing the AU-201 with MK-735

*2: When installing the AU-201 without MK-735

*3: No particular order in installation procedures.

*4: Unable to be installed in d-Color MF 452 plus.

UK-208*3

KP-101

A2XKIXC001DA

Applied Machines: d-Color MF 552 plus/d-Color MF 452 plus/d-Color MF 362 plus/

d-Color MF 282 plus/d-Color MF 222 plus

Y115290-3 Installation ManualY115290-3 Installation Manual

E-2

Outline of installation procedures (d-Color MF 362 plus/d-Color MF 282 plus/d-Color MF 222 plus)

When installing the machine and associated options as a system, follow the order shown on the upper.

Caution:

• For the detailed installation procedures for each

option, follow the instructions given in the corre-

sponding installation manual and perform the

procedures correctly. (Optional devices must be

installed after completing the main unit installa-

tion.)

• When placing the machine on the floor, make

sure to use the paper feed cabinet to secure the

performance and the quality of the product.

• To use this machine, install the dual scan docu-

ment feeder, the reverse automatic document

feeder, or the original cover.

Even if you do not install the original cover, be

sure to install the hinge covers supplied with

the original cover.

• Once the Power Switch is turned ON, do not

turn OFF it until the installation work has been

completed.

• Lifting the machine in an awkward position or

transporting it in a poorly balanced position

could result in personal injury. When transport-

ing the machine, assign an adequate number of

persons to the job and ensure that each person

can take a good position of not being exces-

sively loaded.

(mass: approx. 85 kg (187-3/8 lb))

*1: When installing the AU-201 with MK-735

*2: When installing the AU-201 without MK-735

*3: No particular order in installation procedures.

*4: No installation is required when DF-701 is loaded.

*5: Unable to be installed in d-Color MF 222 plus.

UK-204*3

PC-110

JS-506

Machine

PC-210

SP-501 OC-511DF-701

PK-520

SD-511

MK-730

AU-102

FS-534

Electronic system options

FS-533

PK-519

MK-735

EK-606*3 EK-607*3

UK-208*3

SC-508

VI-506*5

IC-414*5

PC-410

MK-734

HT-509

WT-506

AU-201*2

DF-624

AU-201*1

KH-102

✱Electronic system options

KP-101

FK-511

UK-209*4

A161IXC001DA

Installation Manual Y115290-3

E-3

II. Installation space (unit: mm (inch))

d-Color MF 552 plus + PC-210 + ZU-606 + FS-535

+ LU-204

d-Color MF 362 plus + DF-701 + PC-210 + FS-534

+ MK-730

III. Pre-installation check items

1. Select a level and stable place for installing the

machine.

2. Be sure to use a power source of the voltage and

frequency indicated in the product specifications.

Ensure that the current carrying capacity of the

power outlet is at least equal to the current listed

in the product specifications.

3. Power the machine directly from a dedicated

power outlet. (Do not use an extension cord.)

4. Do not plug or unplug the power cord with wet or

dirty hands, otherwise you may get an electric

shock.

5. Avoid a hot and humid environment, or a place

exposed to direct sunlight.

6. Avoid a dusty location, or a place near volatile

and flammable substances.

7. Avoid a poorly ventilated place.

IV. Notes on using touch panel

Be sure to instruct users on the following points.

• This machine uses a capacitive touch panel.

When you touch the touch panel, use your fin-

ger or the stylus pen supplied with the machine.

If you touch the panel using your nail or a pen

tip instead of using your finger or the stylus pen,

the touch panel does not respond normally.

• Pressing the touch panel hard may cause dam-

age.

• Do not strongly press the panel or press it using

the sharp tip of mechanical pencils.

• The key is a finger tapping (quick light touch

using a finger) operation.

A5AYIXC001DA

1217

(47-15/16) 480

(18-7/8)

2763

(108-3/4)

1066

(41-15/16)

1246

(49-1/16)

428

(16-7/8) 818

(32-3/16)

1568

(61-3/4)

386

(15-3/16)

936

(36-7/8)

246

(9-11/16)

A5C1IXC011DA

937

(36-7/8) 225

(8-7/8)

1822

(71-3/4)

660

(26)

1246

(49-1/16)

428

(16-7/8) 818

(32-3/16)

1568

(61-3/4)

386

(15-3/16)

936

(36-7/8)

246

(9-11/16)

Y115290-3 Installation Manual

E-4

V. Accessory parts

d-Color MF 552 plus/d-Color MF 452 plus: One

d-Color MF 362 plus/d-Color MF 282 plus/d-Color

MF 222 plus: Two

d-Color MF 362 plus/d-Color MF 282 plus/d-Color

MF 222 plus only

d-Color MF 552 plus/d-Color MF 452 plus only

Note:

The parts shown below are used when installing

options. Keep them safe.

• Paper size label: Large capacity unit (LU-301)

(d-Color MF 552 plus/d-Color MF 452 plus only)

• Label (Super G3 label): Fax kit

Note:

This manual provides the illustrations of the accessory

parts and machine that may be slightly different in

shape from yours. In that case, instead of the illustra-

tions, use the appearance of your machine to follow

the installation procedure. This does not cause any

significant change or problem with the procedure.

No. Name Q’ty

1. User’s guide holder 1

2. Installation manual 1 set

3. Paper size label 1

4. Label (Legal restrictions on copying) 1

5. Label (Super G3 label) 1

6. Cap A (Black) 2

7. Cap B (White) 2

8. Power cord 1

9. Power cord instruction 1

10. Cord clamp*1 1 or 2

11. Connector cover 1

12. Screw A *2 1

13. Screw B 1

14. Screw C

15. Chart *3 1

16. Spacer 1

17. Stylus pen 1

18. Waste toner box 1

9738

9646

A161IXC061DA

After unpacking, be sure to get rid of the

packaging materials and keep them out of

the reach of children.

Putting the head in the plastic bag

involves danger of suffocation.

Installation Manual Y115290-3

E-5

VI. Removing the machine

1. Unpack and remove the machine package.

2. Remove the machine, holding it by the locations

on the left side and the handles on the right side

as shown in the illustration and keeping it level.

Caution:

Machine mass

d-Color MF 552 plus/d-Color MF 452 plus: approx.

101 kg/222-11/16 lb

d-Color MF 362 plus/d-Color MF 282 plus/d-Color

MF 222 plus: approx. 85 kg/187-3/8 lb

• Make available collective manpower of an

appropriate size for transporting the machine.

• Before attaching the machine to the paper feed

cabinet, make sure that the supplied connector

cover is not attached.

• When attaching the machine, as the reference

fit the machine with the corner A and B of the

paper feed cabinet.

VII. Removing protective tape, packing

and other shipping materials

1. Remove the protective tape and the protective

materials.

Note:

After removing protective tape A, be sure to push

the area indicated by the “ ” mark to lock the

guide. (d-Color MF 552 plus/d-Color MF 452 plus

only)

When holding the transportation handles,

be careful not to catch your fingers in the

machine.

A2XKIXC003DA

A2XKIXE034DA

Connector cover

A5AYIXC003DA

A5AYIXC002DA

<d-Color MF 552 plus/d-Color MF 452 plus>

Y115290-3 Installation Manual

E-6

2. Open the right door and remove the protective

sheet and packaging materials.

Note:

After removing the packaging materials, make

sure that the transfer roller assy is secured in

place. In the case of <NG>, press the transfer

roller assy into place so that it is secured as shown

in <OK>.

3. Remove the locking screws.

4. Remove the protective sheets.

A5C1IXC001DA

A5C1IXC003DA

A5C1IXC002DA

A5C1IXE012DA

<d-Color MF 362 plus/d-Color MF 282 plus/

d-Color MF 222 plus>

A161IXC005DB

< OK > < NG >

A2XKIXC008DA

A2XKIXC009DA

Installation Manual Y115290-3

E-7

5. Slide out the tray 1 and remove the protective

tape from the inside of the tray.

6. Slide out the tray 2 and remove the tray locking

materials.

7. Remove the protective tapes from the inside of

the tray 2 and remove accessory parts.

8. <d-Color MF 552 plus/d-Color MF 452 plus>

Open the lower front door.

<d-Color MF 362 plus/d-Color MF 282 plus/d-

Color MF 222 plus>

Open the front door.

A5C1IXC005DA

A161IXC009DA

A5AYIXC004DA

A2XKIXC010DA

A161IXC015DB

Y115290-3 Installation Manual

E-8

9. <d-Color MF 552 plus/d-Color MF 452 plus>

Remove the protective tape.

<d-Color MF 362 plus/d-Color MF 282 plus/d-

Color MF 222 plus>

Remove the protective tape and protective mate-

rial.

10. Remove the protective tape from the drum units

and developing units.

Note:

Do not remove the tape A in this procedure.

11. Remove the protective materials from the four

places.

Note:

Keep the protective materials. It is necessary for

transporting the machine.

12. Release the lever of the drum unit (K).

13. Slightly slide the drum unit (K) out and remove

the protective tape

A2XKIXC011DA

Protective tape

A161IXC010DC

Protective tape

Protective material

A5AYIXC005DA

A2XKIXC013DA

A2XKIXC014DA

A2XKIXC015DA

Installation Manual Y115290-3

E-9

14. Slide the drum unit (K) into the machine.

15. Lock the drum unit (K) with the lever.

16. Install the supplied waste toner box.

Note:

Push the areas indicated by the “ ” marks to set

the waste toner box to the machine

* Perform the following steps 17 to 19 only when

installing d-Color MF 552 plus/d-Color MF 452

plus.

17. Close the lower front door.

18. Open the upper front door.

19. Remove the protective tape and protective

material.

VIII. Installing the toner cartridge

Note:

Since cartridge is not supplied with the machine,

purchase toner cartridge (of different colors) sepa-

rately.

1. Shake the toner cartridge up and down and left to

right 5 to 10 times respectively.

Note:

Shake the cartridge adequately. Otherwise, it may

cause trouble.

2. Insert the toner cartridge into the machine.

Note:

• Make sure that the color is same between

inserting port and the toner cartridge.

• Make sure that the blue label position of the

toner cartridge is matched with the one of the

machine side.

A2XKIXC016DA

A2XKIXC031DA

Protective tape/

Protective material

A0EDIXC020DA

A2XKIXC017DA

Y115290-3 Installation Manual

E-10

3. Push the toner cartridge all the way in and rotate

it clockwise to lock it.

Note:

Make sure that the toner cartridge is pushed all the

way in.

4. Using the same procedure, install the toner car-

tridges for other colors of toner.

5. <d-Color MF 552 plus/d-Color MF 452 plus>

Close the upper front door.

<d-Color MF 362 plus/d-Color MF 282 plus/d-

Color MF 222 plus>

Close the front door.

IX. Mounting the accessory parts

1. Attach the supplied caps A and B.

2. Remove the protective cover from the supplied

stylus pen.

Note:

Discard the removed protective cover.

3. Set the stylus pen in the place shown in the illus-

tration.

4. Attach the supplied cord clamp to the scanner

rear cover of the machine. (One supplied screw

Note:

Only d-Color MF 362 plus/d-Color MF 282 plus/d-

Color MF 222 plus needs this step.

5. Attach the supplied connector cover to the

machine. (One supplied screw B)

A2XKIXC018DA

A2XKIXC019DA

A2X0IXC068DA

A5C1IXC007DA

A161IXE047DA

A161IXE065DA

Installation Manual Y115290-3

Andere Handbücher für d-COLOR MF222plus

Inhaltsverzeichnis

Andere Olivetti Kopierer Handbücher

Olivetti

Olivetti d-Color MF45 Bedienungsanleitung

Olivetti

Olivetti DF-650 Bedienungsanleitung

Olivetti

Olivetti d-Copia 120 Einrichtungshandbuch

Olivetti

Olivetti d-Copia 2000 Bedienungsanleitung

Olivetti

Olivetti d-Copia 2500MF Bedienungsanleitung

Olivetti

Olivetti d-Copia 18MF Operation Bedienungsanleitung

Olivetti

Olivetti d-Copia 1600 Bedienungsanleitung

Olivetti

Olivetti d-Copia 2200MF Bedienungsanleitung

Olivetti

Olivetti d-COLOR MF452plus Bedienungsanleitung

Olivetti

Olivetti DP-670 Bedienungsanleitung

Olivetti

Olivetti Copia 9916 Bedienungsanleitung

Olivetti

Olivetti JS-420 Bedienungsanleitung

Olivetti

Olivetti d-Color MF25 Bedienungsanleitung

Olivetti

Olivetti DP-700 Bedienungsanleitung

Olivetti

Olivetti d-Color MF 4003 Bedienungsanleitung

Olivetti

Olivetti d-Copia 5200MF Bedienungsanleitung

Olivetti

Olivetti d-COLOR MF3100 Bedienungsanleitung

Olivetti

Olivetti d-Copia 1800MF Bedienungsanleitung

Olivetti

Olivetti Copia 9915F Bedienungsanleitung

Olivetti

Olivetti AR-DU3 Bedienungsanleitung

Olivetti

Olivetti d-Color MF369 Bedienungsanleitung

Olivetti

Olivetti D-COPIA 8200 Bedienungsanleitung

Olivetti

Olivetti DF-670 Bedienungsanleitung

Olivetti

Olivetti d-COPIA 3500MF Bedienungsanleitung

Beliebte Kopierer Handbücher anderer Marken

Canon

Canon iR1210 Referenzhandbuch

Ricoh

Ricoh FW740 Bedienungsanleitung

Minolta

Minolta CF910 Bedienungsanleitung

Ricoh

Ricoh B003 Bedienungsanleitung

Xerox

Xerox EC70 Bedienungsanleitung

Oce

Oce 9800 Bedienungsanleitung

Minolta

Minolta Di181 Bedienungsanleitung

Canon

Canon iR5000i Bedienungsanleitung

Telecrane

Telecrane F25 Bedienungsanleitung

Xerox

Xerox WorkCentre Pro 40 Bedienungsanleitung

Canon

Canon NP6317 Anleitung zur Verwendung

Sharp

Sharp AR-5015 N Bedienungsanleitung

Ricoh

Ricoh Di-C1 Bedienungsanleitung

Mita

Mita MIP-2400 Handbuch

Sharp

Sharp AL-2061 Bedienungsanleitung

Muratec

Muratec MFX-C2280 Bedienungsanleitung

Ricoh

Ricoh FT5034C Bedienungsanleitung

Minolta

Minolta EP4000 Bedienungsanleitung

Olivetti d-COLOR MF222plus Bedienungsanleitung

Beliebte Kopierer Handbücher anderer Marken