Olympia 500 Series Bedienungsanleitung
2
OLYMPIA 500 SERIES
Features and Benefits
A one-person cleaning, scraping and resurfacing operation.
Controls within easy reach of the operator
Fast on & off hook-up system
Fits any 3-point tractor hitch
Stainless steel flood pipes
Towel bar for smooth ice resurfacing
Designed for maintenance by your own staff
Parts and Service readily available
Designed in Canada, manufactured in Germany
Can be stored in the summer freeing the tractor for other tasks
Turn your outdoor rink into a championship ice surface with the easy
to use, fast, efficient, tractor mounted OLYMPIA 500 ice resurfacer
from Resurfice Corp.
The OLYMPIA 500 twin snow bins allow easy access for off-loading
the snow following the resurfacing operation.
3
Foreword
Dear User!
Before you put your OLYMPIA Ice Resurfacer into operation,
please take the time to carefully read this operating manual.
Pay particular attention to the safety instructions given
throughout the manual.
This is a prerequisite for…
Safe handling and operation of the ice resurfacer,
Trouble-free operation of the machine.
Always keep the operating manual in the vicinity of the ice
resurfacer.
Foreword
4
Note:
We reserve the right to make changes in content. Resurfice
Corporation accepts no liability for any errors in this
documentation. Liability for indirect damages arising from the
supply and use of this documentation is excluded, unless
required by law.
Copyright in acc. with DIN 34:
This manual must not be copied or passed on to third parties, nor
must its contents be used by, nor imparted to third parties without
express permission.
Failure to comply will result in claim for damages. All rights with
regard to the granting of a patent or design registration reserved.
Resurfice Corporation
©2020 RESURFICE CORPORATION
25 Oriole Parkway East, Elmira, ON N3B 3A9
All rights reserved. Reproduction, whether in whole or in part, requires the
authorization of the company Resurfice Corporation.
Foreword
Version 10/2020 5
1. WELCOME TO THE OLYMPIA ADVANTAGE 5-6
2. GENERAL INFORMATION 6
2.1 Before operating your OLYMPIA 500 Ice Resurfacer 6
2.2 OLYMPIA 500 features 7
3. DELIVERY PROCEDURE 8
3.1 Tractor Requirements 8
3.2 The initial Setup of the OLYMPIA 500 Ice Resurfacer 9
3.3 How to install the blade 10
3.4 Blade Angle 11-13
3.5 Blade Sharpness 14
3.6 Blade Sharpening 14-15
3.7 Auger Adjustment 16-17
3.8 How to adjust the Elevator Chain 17
3.9 How to install a new Elevator Chain 18
3.10 How to install a new Bottom Sprocket 18
3.11 How to adjust the Top Auger 18
3.12 Now you are ready to add water 19
3.13 Preventative maintenance 19-20
3.14 How to properly store your OLYMPIA 500 20-21
4 PARTS AND SERVICE 22
4.1 Bottom Auger Assembly 22-23
4.2 Blade Holder Assembly 24-25
4.3 Flood Water System 26-27
4.4 Snow Conveyor System 28-29
4.5 Main Assembly 30-31
5 MAINTENANCE LOG 32
Welcome to the OLYMPIA Advantage
Version 10/2020 6
1. Welcome to the OLYMPIA Advantage
The OLYMPIA Product line is designed and built to exacting standard
to provide trouble free performance. Like all mechanical equipment
however, trouble free performance requires effective maintenance and
proper operating procedures to be followed. Failure to follow a complete
and on-going maintenance program will invalidate the Resurfice Corp.
warranty on the OLYMPIA 500.
Purchaser: ……………………………………………………….
Address: ……………………………………………………….
……………………………………………………….
……………………………………………………….
……………………………………………………….
Model: ……………………………………………………….
Serial Number: ……………………………………………………….
Date Delivered: ………………………………………………………..
We have included a maintenance log form at the back of this manual to
assist you in maintaining a permanent record of the maintenance
carried out on the OLYMPIA 500.
The illustration and product information contained in this manual were
current at the time of publication. In order to continue Resurfice Corp.´s
development of its technology, Resurfice Corp. reserves the right to
change designs, models and specifications without notice and without
liability for such changes.
Resurfice Corp. warrants the components of your OLYMPIA 500
against defects in material and workmanship, for two years from the
date of delivery.
General Information
Version 10/2020 7
For the continued safe, economic operation and to validate the
Resurfice Corp. warranty, the over-all maintenance and operation of
your OLYMPIA 500 must strictly follow the guideline outlined in this
manual.
Resurfice Corp. or an authorized dealer must first authorize all warranty
repairs.
No warranty on this machine will be honored by Resurfice Corp. other
than that stated above.
2. General Information
2.1 Before operating your OLYMPIA 500 Ice Resurfacer
Congratulations on buying the finest tractor mounted resurfacing
machine made. Before you start to operate your new OLYMPIA 500,
we strongly recommend that you read this manual thoroughly. In it,
you will find all the information needed for years of trouble-free
operation.
Your new OLYMPIA 500 was inspected before delivery, however,
due to vibrations caused by transportation, all bolts, set screws,
fasteners, shields, etc. should be checked for tightness upon arrival.
Following the first week of use, you should recheck these same
bolts, set screws, fasteners and shields again. After your machine
has been in use for a period of time, periodic preventative
maintenance checks should be performed. In fact, for maximum
performance, we suggest that you establish and follow a
comprehensive maintenance schedule.
In the interest of safety, the operator should keep in mind that he is
operating a heavy and powerful piece of equipment. It is also
recommended that no person, other than the operator, be permitted
to ride on the machine, while it is in operation.
General Information
Version 10/2020 8
2.2 OLYMPIA 500 features
One-person operation for cleaning, scraping and
resurfacing
Simple on/off design frees tractor for summer work
Stailess steel flood pipes
Controls within easy reach of the operator
Easy maintenance by your own staff
Fits any 3-point tractor hitch
Easily accessible snow tanks
Resurfacer can be hooked up in minutes
Service and parts are readily available
Specifications
Height……….……………………………………….67” (170,2 cm)
Width……………………………………………...82 ½” (209,6 cm)
Length………………………………………………..43” (109,2 cm)
Weight (empty)………………………………..1200 Ibs. (544,3 kg)
Water tank capacity………………. approx 90 imp gal. (409,1 L.)
Snow bin capacity.....................................50 cu. Ft. (1.415 cum)
Ice shaver blade…………...80” x 5” x ½” (203,2 x 12,7 x 1,3 cm)
The illustration and product information contained herein were
current at the time of publication. However, in order to continue
to offer the finest products available, Resurfice Corp., reserves
the right to change specifications designs, and models without
notice and without liability for such changes.
Delivery Procedure
Version 10/2020 9
3. Delivery Procedure
3.1 Tractor Requirements
It is important that your tractor be equipped with the following to give
you peak performance:
- Minimum of 45 horsepower
- Ballast pack (mounted on the front of the tractor) to counter-
balance the weight of the OLYMPIA 500 when it is full of water.
- Studded front and rear tires. This will give you optimum traction
and steering.
- Sway bars are essential to prevent your machine from swaying
from side to side.
- “Liquid” filled tires to reduce bounce and increase traction.
- A hydraulic flow of 6 Imperial gallons (22.7 Liters) is required (no
more). If your tractor pumps more than 6 G.P.M. (22.7 Lpm)
ensure the flow control is set to and operating at 6gpm (22.7 Lpm)
to regulate the bottom auger RPM´s to approximately 300 rpm.
Damage will occur at higher flow rates.
Delivery Procedure
Version 10/2020 10
3.2 The initial Setup of the OLYMPIA 500 Ice Resurfacer
1. Attach spreader cloth to spreader cloth holder with the shorter
bolts supplied (3/8” x 1”).
2. The squeegee should be installed on the inside of the resurfacer
rather than on the outside. This will prevent any snow from sliding
out the sides and leaving a ridge. Use the 3/8” x 1 ¼” bolts to
secure the squeegee. The ends of the squeegee should be
trimmed for a tight fit.
Due to the EXTREME sharpness of
the blade, caution and utmost care
must be taken when handling.
3. A blade protector had been provided – please use it!
When you are installing or removing a blade, place the protector
on the blade with the magnetic strips on the bottom.
REMEMBER to remove the blade protector AFTER the bolts have
been properly tightened.
Inhaltsverzeichnis
