Olympia Protect 9 Series Bedienungsanleitung

Protect 9xxx Wireless Alarm System

Operating Manual

01.2016 en rev.03

Olympia Business Systems Vertriebs GmbH

Zum Kraftwerk 1

45527 Hattingen

Introduction 5......................

Guarantee 5..............................

User Information 5........................

Exemption From Liability 5.................

Intended Use 6...........................

Product Features 6........................

Scope of Delivery 7........................

Warnings 7........................

Installation 9.......................

Information on Selecting the

Installation Location 10..................

Preparing and Connecting the Base Unit 10...

Positioning the Base Unit 11.................

Operating Elements and Indicators 12

Keys on the Base Unit 12...................

Display Icons 14...........................

Overview of LEDs 15.......................

Buttons on the Remote Control 15............

Menu Structure 16...................

Configuration 18....................

Navigating Through the Menu 18.............

Language 18..............................

Date and Time 18..........................

PIN (Personal Identification Number) 18.......

Key Lock 19...............................

Individual Outgoing Messages 19............

GSM Dialling Unit 20.......................

Trigger Delay 24...........................

Arming Delay 24...........................

Alarm Period 24............................

Key Tone 25...............................

Display Contrast 25.........................

Remote Control 25.........................

Water Leak (Flood) and Smoke Detectors 26..

Registering Sensors 26.....................

Deregistering Sensors 27...................

Resetting the Factory Settings (RESET) 27....

Monitoring Functions 28.............

Switching the Monitoring Functions On/Off 28..

Alarm Mode 29............................

At Home Mode 29..........................

PIR At Home Mode 29......................

Silent Mode 30.............................

Disarmed Mode 30.........................

Panic Alarm 30............................

Emergency Call (SOS) 31...................

Remote Access Via Telephone 31............

Appendix 32........................

System Extension 32.......................

Changing the Batteries 32...................

Regular Maintenance and Service 34.........

Information on Disposal 34..................

Technical Data 35..........................

Technical Modifications 36..................

CE Mark 36...............................

Newsletter 36..............................

Manufacturer 36...........................

Introduction

Guarantee

Dear Customer,

we are pleased that you have chosen this equipment.

In the case of a defect, please return the device together

with the receipt and original packing material to the point-of-

sale.

User Information

The alarm system is a passive security product and has

been conceived as a deterrent. Additional measures are

necessary to prevent and hinder burglary and theft. You

can obtain all the necessary information on this from your

local police station.

Read the operating instruction manual thoroughly before

connecting and starting the system for the first time. The

operating instruction manual will help prevent application

errors and, at the same time, ensure you can exploit all the

technical options provided by the wireless alarm system to

the full.

Exemption From Liability

We cannot guarantee that the information which relates to

the technical properties of the product or to the product it

self contained in this document is correct. The product and

its accessories described in this document are subject to

constant improvement and further development. For this

reason, we reserve the right to modify components, acces

sories, technical specifications and related documentation

of the product described herein at any time without notice.

Introduction

Intended Use

The wireless alarm systems from the Protect9XXX Series

enable you to monitor rooms and buildings as long as the

local conditions are such that they enable a reliable trans

mission link to the sensors (e.g. door/window contact,

smoke detector). In addition, all doors and windows must

be equipped with door/window contacts. A condition for

complying with the intended use is that the equipment is

installed correctly and the information in the instruction

manual is observed and maintained.

Any other use is considered unintended use. Unauthorised

modifications or reconstructions not described in the opera

ting manual are not permitted and could cause the product

to be damaged. Furthermore, risks through short-circuits,

fire, electric shock etc. cannot be ruled out.

This operating instruction manual contains important

information on setting up and handling the equipment.

The manual must be enclosed with the equipment if

handed over to others.

Product Features

• Wireless alarm system with emergency call, panic,

screening and handsfree functions.

• Integrated GSM dialling unit with outgoing message for

alarm messages via the mobile network.

• Up to 10 alarm call numbers and 1 emergency call num

ber (SOS).

• Individual voice message for each sensor.

• Automatic dialling of the next number when the number

called is "engaged".

• Handsfree function on the base unit in the case of an

SOS.

• Alarms can be issued via the telephone (silent alarm)

individually or combined.

• Large LC display, 1 numeric line in 7 segments for

24 characters, 1 alphanumeric line in 5x7 dot matrix for

13 characters, 11 icons as status indicators.

• Display lighting in yellow and blue.

• Warning in the case of a low battery charge.

• Power failure backup in the base unit.

• Base unit has a remote control facility.

• Upgradable for operation with max. 32 sensors.

• Simple integration of new sensors using plug-and-play

technology.

Warnings

Scope of Delivery

Please check the contents of the package carefully. If any

thing is missing or has been damaged during transport, DO

NOT put the wireless alarm system into operation!

Keep the packaging in a safe place to protect the equip

ment from damage should it need to be dispatched in fu

ture.

Base unit 1

Power adapter plug 1

Remote control 1

Batteries 3 x alkaline AAA

1 x lithium CR2430 3 V

Assembly material Screws, dowels,

adhesive tape

Operating manual 1

Warnings

The following warning information applies to the entire doc

ument. Read and observe all the warning information to

protect yourself and the environment from any harm.

The following warning information indicates potentially dan

gerous situations which could lead to serious injuries or

even fatal injuries if the information is ignored.

WARNING!

• Risk of fatal injury from electric shock!

NEVER use the device if you suspect damage to the

power cable or power plug or there are visible signs of

damage to the power cable or power plug.

NEVER complete any repairs to the device yourself.

Contact our Service department.

Only use the device at those installation locations de

scribed in Chapter "Installation".

WARNING!

• Risk of suffocation!

Children can swallow small parts, packaging and protec

tive foils.

Keep the device and packaging out of reach of children.

Warnings

WARNING!

• Risks to health through batteries!

Keep batteries out of reach of children. Do not swallow

batteries. If any type of battery is swallowed, seek medi

cal attention immediately.

WARNING!

• Risk of explosion!

Improper storage of batteries can put your health and the

environment at risk. Batteries may contain toxic, ecologi

cally hazardous heavy metals.

Never open, damage or swallow batteries or allow them

to pollute the environment.

The following warning information indicates potentially dan

gerous situations which could lead to minor or slight in

juries if the information is ignored.

CAUTION!

• Hearing damage through loud alarm signal!

Due to legal requirements, the alarm signal continues for

maximally 120 seconds. The alarm signal switches off

automatically after approx. 120 seconds if the user does

not interrupt it.

Use ear protectors when testing the device.

Do not remain in the vicinity of the acoustic alarm for a

longer period when it has been triggered.

The following warning information indicates potentially dan

gerous situations which could lead to property damage if

the information is ignored.

ATTENTION!

• Property damage through the use of inappropriate bat

teries!

The use of inappropriate batteries can cause a loss of

function of the device.

Only use batteries of the type described in Section

"Technical Data".

ATTENTION!

• Property damage through environmental influences!

Prevent environmental influences such as exposure to

smoke, dust, vibration, chemicals, moisture, heat and

direct sunlight.

Installation

RESET

SIM card

Antenna switch

microUSB port

DC IN

RESET

Int Ext

Ext. Ant

LOCK

OPEN

Installation

Information on Selecting the Installation Location

Do not place the base unit on or in the direct vicinity of

large metallic objects or electrical sources of interference

which could impair the function of the base unit. Examples

of sources of interference include radiators, concrete steel

walls, metal doors, loudspeaker systems, motors and other

unshielded electronic devices.

• Position the base unit as centrally as possible in the

area to be monitored to ensure optimum radio transmis

sion of all components.

• Position the base unit near a properly installed power

socket (230 V / 50 Hz).

• Position the base unit and alarm system components in

such a way that a distance of at least 20 cm is main

tained to you and/or other persons. This is a useful way

of reducing any exposure to radio waves.

• Position the base unit in an area which, when accessed,

triggers the alarm. This prevents intruders being able to

approach the base unit and manipulate it.

Preparing and Connecting the Base Unit

1. Use a screwdriver to loosen the screw in the battery and

connection socket compartment on the underside of the

base unit.

2. Remove the cover from the battery and connection

socket compartment.

LOCK

OPEN

LOCK

OPEN

3. Slide the SIM card holder to the left to unlock it (A).

4. Pivot the holder up and insert the SIM card in the hold

er (B).

5. Pivot the holder with the SIM card back and slide the

holder to the right to lock it (C).

6. Insert three batteries in the battery compartment (pay

attention to correct polarity).

Inhaltsverzeichnis

Andere Olympia Sicherheitssystem Handbücher

Olympia

Olympia Protect Series Bedienungsanleitung

Olympia

Olympia Secure AS 602 Bedienungsanleitung

Olympia

Olympia Protect 6 Series Bedienungsanleitung

Olympia

Olympia Protect 6XXX Series Bedienungsanleitung

Olympia

Olympia Protect 5080 Bedienungsanleitung

Olympia

Olympia ProHome 8762 Bedienungsanleitung

Olympia

Olympia CI 200 Bedienungsanleitung

Olympia

Olympia prohome 8791 Bedienungsanleitung

Olympia

Olympia ProHome series Bedienungsanleitung

Olympia

Olympia 5991 Bedienungsanleitung

Olympia

Olympia BS-468/A Bedienungsanleitung

Olympia

Olympia 5912 Bedienungsanleitung

Olympia

Olympia SECURE AS 302 Bedienungsanleitung

Olympia

Olympia SECURE AS 605 Bedienungsanleitung

Olympia

Olympia Protect 9XXX Series Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung