Olympus DP70 Bedienungsanleitung
This user’s manual is for the OLYMPUS DP70 Microscope Digital Camera in conjunc-
tion with the OLYMPUS DP2-BSW application software. To ensure safety, obtain opti-
mum performance and familiarize yourself fully with the use of this system, we
recommend that you study this manual thoroughly before operating the camera.
Retain this manual in an easily accessible place near a system for future reference.
This publication is printed on 100% recycled paper.
USER’S MANUAL
DP70 &
APPLICATION SOFTWARE
DP2-BSW
Any copyrights relating to this manual shall belong to Olympus Corporation. We at Olympus Corporation
have tried to make the information contained in this manual as accurate and reliable as possible.
Nevertheless, Olympus Corporation disclaims any warranty of any kind, whether expressed or implied, as
to any matter whatsoever relating to this manual, including without limitation the merchantability or fitness
for any particular purpose. Olympus Corporation will from time to time revise the software described in this
manual and reserves the right to make such changes without obligation to notify the purchaser. In no event
shall Olympus Corporation be liable for any indirect, special, incidental, or consequential damages arising
out of purchase or use of this manual or the information contained herein.
No part of this document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the prior written permission of
Olympus Corporation.
Windows, Word, Excel and Access are trademarks of Microsoft Corporation which can be registered in
various countries. Adobe and Acrobat are trademarks of Adobe Sytems Incorporated which can be
registered in various countries.
© Olympus Corporation
All rights reserved
Manual version September, 29th 2006
Printed in Germany
Table of Contents
Important information .......................................................2
About the contents of this manual ..................................................................2
Warning .............................................................................................................2
Maintenance and Storage ................................................................................3
DP70 - System Chart .........................................................4
The installation process ...................................................4
Installation of the DP70 camera with the DP2-BSW soft-
ware ....................................................................................6
Preparing your computer .................................................................................6
Installing the software ......................................................................................8
Starting the DP2-BSW software ....................................................................14
Acquiring your first images ...........................................14
Special camera functions ..............................................................................14
Super Fluorescence Mode (SFL) ..............................................................................15
Supersampling ..........................................................................................................16
Calibrations .....................................................................16
Camera settings ..............................................................16
General .....................................................................................................................17
Color .........................................................................................................................19
Adjustment ................................................................................................................20
Exposure ...................................................................................................................25
Information ................................................................................................................26
Help with problems .........................................................28
Important information
2
Important information
About the contents of this manual
This manual describes the installation of the DP2-BSW image analysis program, the
setting up of the DP70 camera for use with the DP2-BSW image analysis program,
and the way to operate the DP70 camera with the DP2-BSW image analysis
program.
Warning
Warning This manual does not describe the installation of the camera itself. For this you
should use the DP70 Digital Microscope Camera Instruction Manual that was
supplied with your camera.
See also You will find a detailed description of the camera controls, based on a sample
camera, in your image analysis program's manual. You will find a description of
the camera specific functions in this manual, starting on page 14.
Warning Do not disassemble the camera housing! CCD image sensors are easily damaged
by static discharge.
Warning To avoid damage to the cable and the risk of fire, make sure that the camera cables
do not come into contact with the light source or other sources of heat.
Warning In case of a fire toxic gases can be given off!
Warning Arrange the cables in such a way that nobody can stumble or trip over them.
Warning Do not touch cover slip (over the CCD chip) with your hand or have any object come
in contact with glass surface. Should dust stick to the cover slip, blow it off gently with
an air blower. (For dust stuck due to static electricity, ionized air is recommended.)
Warning Do not subject the camera to too much mechanical shock.
Warning If the cable is damaged or severed, you risk an electric shock if you come in direct
contact with it. Shut off the hardware and change the cable immediately!
Warning To prevent the microscope from toppling down, avoid using microscope attachments
that may make the total height of the microscope above 1 m when they are attached.
Important information
3
Operating Environ-
ment
•Do not expose to strong light (sunlight) for long periods.
•High temperatures (> 40°C) and humidity (> 80%) can influence the camera's
capabilities. Avoid storage or usage under such conditions.
Maintenance and Storage
1) To clean the lenses and other glass components, simply blow dirt away using a
commercially available blower and wipe gently using a piece of cleaning paper
(or clean gauze).
If a lens is stained with fingerprints or oil smudges, wipe it with gauze slightly
moistened with commercially available absolute alcohol.
2) Parts other than the glass components should be cleaned by wiping with a clean
cloth. Do not use organic solvents to remove major stains. Use a soft cloth
slightly moistened with a neutral detergent solution.
3) Do not disassemble any part of the camera as this could cause a malfunction or
reduced performance.
Warning Since the absolute alcohol is highly flammable, it must be handled carefully.
Be sure to keep it away from open flames or potential sources of electric sparks - for
example, electrical equipment that is being switched on or off.
Also remember to always use these chemicals only in a well-ventilated room.
DP70 - System Chart
4
DP70 - System Chart
The DP70 system chart belongs to the camera's scope of supply. Please go in the
DP70 user's manual to Chapter 1: (The System Chart).
The installation process
You have
purchased the
image analysis
program and
camera together
If you have purchased the DP70 camera together with the image analysis program,
you will need to carry out both the hardware installation for the camera and the soft-
ware installation for the image analysis program.
In order to avoid problems, you will have to follow the steps of the procedure in the
order given here.
Install the PCI board.
This step is described in the DP70 user's manual (Chapter 2: Hardware Instal-
lation, page 8).
Install the camera on your microscope.
This step is described in the DP70 user's manual (Chapter 2: Hardware Instal-
lation, page 9).
Connect the camera to your PC with the cable that was supplied with it.
This step is described in the DP70 user's manual (Chapter 2: Hardware Instal-
lation, page 10).
Prepare your computer for the rest of the installation.
This step is described in this manual, beginning on page 6.
Start the DP2-BSW image analysis program.
Install the DP2-BSW image analysis program.
This step is described in this manual, beginning on page 8.
The installation process
5
You have already
installed the DP70
on your system
If you purchased the image analysis program at a later date, you will not need to
install the camera again.
You can operate your camera by turns with DP2-BSW and another software that you
have already installed. Simultaneously running different software packages that work
with the DP70 is, however, not possible.
Prepare your computer for the installation.
This step is described in this manual, beginning on page 6. Start with step 3.
Start the DP2-BSW image analysis program.
Install the DP2-BSW image analysis program.
This step is described in this manual, beginning on page 8.
Installation of the DP70 camera with the DP2-BSW software
6
Installation of the DP70 camera with
the DP2-BSW software
System requirements
See the DP70 Instructions Manual, page 4, for the system requirements.
Preparing your computer
You can also install the DP2-BSW software on your PC when you have already
installed another software package from Olympus Soft Imaging Solutions on it.
Only if the camera
has not been
installed previously
1) Switch on the PC and start the operating system.
You need administrator rights in order to install the software.
The Found New Hardware dialog box will open. The operating system has
detected the new PCI board.
After starting the
computer this dialog box
will be opened.
Only if the camera
has not been
installed previously
2) Click the Cancel button to abort the installation.
The Found New Hardware dialog box will be closed. The correct drviers will
be installed in conjunction with the image analysis psystem.
3) Insert the software protection key (dongle) into a USB port of your PC.
Installation of the DP70 camera with the DP2-BSW software
7
Your DP2-BSW soft-
ware is protected by a
dongle. Insert it into a
USB port of your PC.
The Found New Hardware dialog box will open. The operating system will
then try to install a driver for the dongle.
When you have plugged
in the dongle, this dialog
box will appear.
4) Since the correct dongle driver can only be installed during the installation of the
image analysis program, you will then need to click the Cancel button.
The Found New Hardware dialog box will close. During the installation of
your image analysis program, the correct dongle driver will be automatically
installed.
Installation of the DP70 camera with the DP2-BSW software
8
Installing the software
1) Close any and all application programs.
2) Put the installation CD-ROM into your CD-ROM drive.
The installation program will open automatically - unless you have deacti-
vated the auto run function. If so, start the setup.exe file via Microsoft
Windows Explorer.
Read carefully through
the license agreement
in the License Agree-
ment dialog box.
Select the Yes, I accept
all terms of the License
Agreement option.
3) To make the installation, simply follow the installation wizard's instructions.
Each time you have made the necessary entry, click the Next > button to con-
tinue.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Olympus Digitalkamera Handbücher
Olympus
Olympus E-5 Bedienungsanleitung
Olympus
Olympus TG-860 Bedienungsanleitung
Olympus
Olympus 800 - Superzoom 800 Bedienungsanleitung
Olympus
Olympus IR 300 - Digital Camera - 5.0 Megapixel Konfigurationshandbuch
Olympus
Olympus Camedia D-340R Bedienungsanleitung
Olympus
Olympus D-600L D-500L Bedienungsanleitung
Olympus
Olympus CAMEDIA C-4040ZOOM Bedienungsanleitung
Olympus
Olympus Stylus 1050SW Montageanleitung
Olympus
Olympus IR 300 - Digital Camera - 5.0 Megapixel Bedienungsanleitung
Olympus
Olympus CAMEDIA D-460ZOOM Bedienungsanleitung
Olympus
Olympus 225690 - Stylus 600 6MP Digital Camera Bedienungsanleitung
Olympus
Olympus E10 - CAMEDIA E 10 Digital Camera SLR Bedienungsanleitung
Olympus
Olympus E-30 Einrichtungshandbuch
Olympus
Olympus CAMEDIA C-100 Bedienungsanleitung
Olympus
Olympus E-400 Bedienungsanleitung
Olympus
Olympus CAMEDIA C-5000 Zoom Bedienungsanleitung
Olympus
Olympus C-50 - Camedia 5MP Digital Camera Bedienungsanleitung
Olympus
Olympus FE-4030 Bedienungsanleitung
Olympus
Olympus FE-4000 Bedienungsanleitung
Olympus
Olympus FE-100 Einrichtungshandbuch
